Question about 2000 Ford Expedition

2 Answers

Freon and pressure is fine, the air conditioner will blow and will cool at a slow pace as the vehicle is driven.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 55 Answers

Could be an airflow issue thru the condensor.

Posted on May 20, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 22,156 Answers

Try changing the expansion valve but to do this you will need the correct machine to empty the system first then re charge with the correct weight of gas ,come to think of it i think this could be your problem ,the gas pressure is up but you could only have about 150grm of gas inside the AC and at this low weight of gas it will only be cool and not cold ,best advice before you fit new parts is ask a local garage with teh AC machine is to vacate the system and see how much gas is in the system then re-charge the AC with about 750grms of gas and see what happens

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air conditioner blows heat, conditioner was charged, freon, checked relay switch, fuse, door blend alol fine still hot air, was told maybe a block in V shape hose is it temp control value Help


Only way to tell if A/C Evaporator Core Orifice tube is plugged is by looking at A/C gauge readings , An if it is plugged you more then likely need a new compressor , they become plugged with metal particles from worn out compressor. Your best bet would be to take your vehicle to a qualified repair shop .

Jun 27, 2016 | 1998 Lincoln Navigator

1 Answer

Air conditioning stopped working suddenly would not respond when switched on


Could be a number of possible issues. A sudden loss of freon, a faulty pressure switch or relay, and so on.
Someone would need to find out if the compressor has power and then proceed from there.

Jul 23, 2014 | 1999 Plymouth Voyager

1 Answer

AIR CONDITIONER


Could be a list of things including low on freon, low pressure switch, relay, or the a/c clutch on the compressor.

Jun 30, 2012 | 1997 Lexus ES 300

1 Answer

2008 legacy air conditioner was blowing cool air but not cold I added one can 134a on low pressure side with motor running ac on high cold now it only blows hot air


I highly recommend that you get it checked by a professional. You may have a restriction in your system, or the system is way overcharged. In either of these cases, the possibility of high pressure causing lines or hoses to burst and possible severe damage to your vehicle, like a destroyed compressor, is very likely.

Also, check the can that you added freon from. Many of the small cans of freon sold at the local parts retailers have several ounces of "oil charge" in them. Many times, when these cans are used to fill the system, the system ends up saturated with too much oil, which can also cause dangerously high head pressures, which can result in severe damage to your vehicle. In these cases, the system must be evacuated and flushed out to reduce the amount of oil in the system before it will cool properly.

Jun 14, 2012 | 1995 Subaru Legacy

1 Answer

Air conditioner stopped blowing cool air. Added freon. Worked well for a few days. Now only blows cool air on passenger side.


Chances are you have a pretty fast freon leak, and the passenger side will be blowing warm within a few days. I have the same thing happen on a couple of my GM cars, except my leak is very slow; warm driver's side, cold passenger side.

You can try and top off the freon again, but I suspect you're going to have to take it to a shop to find the leak and get it fixed. Plan on spending some big dollars for the repair.

Good Luck.

Aug 08, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

Air conditioner is not cooling, it's blowing warm air. how to inspect what you need to do?


First thing is to check the compressor, start the vehicle, look and listen too see if the compressor clutch is coming on (clicking on and off).

If it is ....this could be a sign of just low on freon ?

If it is not....could still be low on freon or a blown fuse, a bad relay, bad compressor clutch, bad low pressure switch, bad high pressure switch, clogged a/c line ECT....

There is a lot more involved to A/C,s...

But I think this would be the fastest and easiest way to check out your a/c?

Sure hope this helps ??

Jul 13, 2011 | 2006 Hummer H3

1 Answer

I have a 2002 Dodge Ram Quad Cab 4x4. The a/c runs great as long as the truck is moving, but as soon as you come to a stop it starts blowing warm air. Please help.


Generally if the a/c works fine at highway speeds but kicks out or slowly begins to blow warmer and warmer air as the vehicle is driven at slow speeds or is stopped the a/c condensor cooling fan is usually at fault. At highway speeds there is enough air being forced through the radiator, condenser, and oil coolers to keep everything working and cool but when the vehicle is moving slowly or is parked the electric and mechanical cooling fans have to be working to pull enough air through to keep things working. If the cooling fan isn't working or can't pull enough air through the a/c condensor the system will kick out once the internal pressure reaches a certain point. Once the vehicle is moving again the system can get rid of the heat that it has gathered from the passenger cabin, the pressure drops back to normal and the system cools again. I would start by looking for a blown cooling fan fuse in the fuse panel under the hood. Usually they are 25 amps or larger and run only the cooling fan.

Jun 14, 2010 | 2004 Dodge Ram 1500

2 Answers

Air Conditioner stops blowing cold air when vehicle is not moving


plus one on the cooling fan problem. if it was low on charge then as you slow down, condensor temps and line prressures would raise therefore it would cool at low speed and and not when moving since the incoming air would drop system temp,reducing line pressure and then cusing compressor to cycle. the auxillary cooling fans must be on whenever a/c is on, if not, thats your problem. get this taken care of because if you get stuck in traffic, your engine will overheat also if fans are not running

Sep 02, 2009 | 2007 Ford Five Hundred Limited Sedan

1 Answer

Air conditioner is not cooling


Are you sure the compressor is engaging? It normally wont engage if the line pressure is to low(meaning the system is out of freon.)

Mar 29, 2009 | 2005 Nissan Maxima

Not finding what you are looking for?
2000 Ford Expedition Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...