Question about Chrysler New Yorker

1 Answer

We have a 94 chrysler new yorker. we have changed the battery and the alternator. There was one of the main fuses under neath hood that was blown. Changed that and it holds. For some reason the battery is draining. we took the battery cable loose when running and the car shuts off. What could be causing this?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 273 Answers

Sounds like your alternator. Even tho it's new, that could still be your problem. Check your battery cables and terminals to see if they are tight. And no corrosion is on either one of them as this could be your problem. If this does not help, then check your belt to make sure its nice looking, AND tight. Also, check ALL of your fuses AND relays. Hope this helps, James Booth. Please rate this. :))

Posted on May 20, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My cruise control is not working in my 94 Chrysler New Yorker why

Blown fuse, loose vacume hose, dead switch, faulty servo,

Nov 04, 2015 | Chrysler Cars & Trucks

1 Answer

No power at all?

check the main fuse under the hood possible its blown

Feb 02, 2014 | 1996 Chrysler Town & Country

1 Answer

I have a new battery and a new altenator and the battery is dying

Check your Main and Alternator fuses under the hood. The alternator fuse is connected directly to your alternator, and if it is blown the alternator will not charge the battery.

Also, check your alternator belt and check your wiring to and from the alternator for damage or shorts. Else, you may have gotten a bad alternator.

Jul 23, 2011 | Ford F-150 Cars & Trucks

1 Answer

Where is the location of the obd 1 port on a 92 chrysler new yorker

It is under the hood near the computer, driver side fender near the battery.

Apr 10, 2011 | 1992 Chrysler New Yorker

2 Answers

No juice out of new altenator with new battey on 2001 taurus 3.0l

it's possible to get a bad "new" alternator. Get it tested.

Dec 31, 2010 | 2001 Ford Taurus

1 Answer

I have a 94 ford ramger the fuse box under neath

for a wiring diagram you could go to autozone and get one from alldata. also try to find someone that has the same vehicle and check it out and take some pictures.

Oct 31, 2009 | 1994 Ford Ranger Supercab

1 Answer

I cant get it to charge. i replaced the alternator ihad it checked before i assembled it it also pops threw the carb when i accelerate.

Check for main fuse for charging Or Alternator under hood. Popping through throttle body could be timing, or electrical, so lets get that working good first.

Jun 02, 2009 | 1990 Chrysler New Yorker

2 Answers

1990 Chrysler New Yorker cooling fan no power

Open the drivers door pull the end off of the dashboard and check fuses for heater fan

Apr 06, 2009 | 1990 Chrysler New Yorker

1 Answer

1993 chrysler & it wont start it just clicks when key is turned

first of all check all your fuses, as you put the battery on wrong its possible you may have blown a few.

Dec 18, 2008 | 1993 Chrysler New Yorker

2 Answers

1993 Chrysler New Yorker 5th Ave No Head lights

you have a power drain going on. you have to trace which part is draining your power. the parts that you mentioned would not work if you already have a low battery condition.

have your battery charged and remove all power fuses and one by one, you insert it back and see if you can find the which part is draining the power.

tnx 4 using fixya,


Oct 03, 2008 | 1993 Chrysler New Yorker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides