What's the meaning of a symbol looking red with a car/wrench on the instrument panel of a 2003 saturn l200? horn don't sound,ac won't work,doors won't unlock after ignition is turned off.
Re: What's the meaning of a symbol looking red with a...
A wrench symbol is the equivalent to a check engine light. Take your car into a mechanic and let them diagnose the error code the engine light is storing to help diagnose the problem.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
easy open the hood then startup car then turn on ac look at the compressor the middle wheel will be turning look at the center of the wheel the hole wheel should be moving
Smart lock? do you have a picture of a red hand on instrument panel? With falcons quite common. Turn & hold key @ start posision, Hit dash upwards on left side of steering colum, If start = faulty smart lock module. I don't know if expodition has smart lock but probably does
You can read what the ECTS is telling your computer with a scanner. (It will read in degrees) If this is bad, sometimes it will read -40 degrees and cause the system to add more fuel, which may be you issue. Also, you can ohm out your spark plug wires to verify if they are all equal.
Service (Wrench) System Check
The SERVICE (Wrench) telltale is turned ON by the cluster when it receives a command from the powertrain control module (PCM) or the body control module (BCM). The PCM or BCM will turn the SERVICE (Wrench) telltale ON for all non-emission related diagnostic trouble codes (DTCs) that require that a telltale be turned ON, some DTCs do not turn ON a telltale but are stored to aid in diagnosis.
The SERVICE (Wrench) telltale will also be turned ON if the Antilock Brake System (ABS) control module has detected a fault in its own warning indicator system. If the ABS cannot turn ON its own telltale, a message will be sent to the BCM through the Key Word 2000 data bus to turn ON the SERVICE (Wrench) telltale.
The SERVICE (Wrench) telltale will be turned ON by the cluster for 2-3 seconds, when the ignition is turned to RUN, for a visual system check.
As crazy as it sounds, I don't see why not. Based on my limited knowledge of a 2002 L200, the power steering is run off the back of the camshaft and the water pump is driven by the timing belt. The only things the serpentine belt runs are the A/C and alternator. Obviously you won't make it very far running without an alternator, but at worst you kill your battery. Serpentine belt on a 2.2l 4 cylinder 2002 L200 has nothing to do with the water pump or power steering pump.
Should be a electrical box under thehood labeled fuses and relays. Locate the fan relay by looking at the diagram underthe box and change it out, It unplugs.
×