Question about 2000 Oldsmobile Silhouette

1 Answer

How to remove a radiater from a 2000 oldsmobile silouette?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,170 Answers


  • Remove air cleaner and duct assembly.
  • Drain coolant into a suitable container.
  • Loosen engine mount strut to engine mount strut bracket bolts.
  • Loosen engine mount strut bracket brace bolts from upper radiator support bracket.
  • Remove mounting bolts on radiator upper support and position engine mount strut and bracket to rear.
  • Ensure ignition switch is in Off position, then disconnect cooling fan.

Posted on May 20, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to flush radiator 2000 olds silhouette

take off the cap
remove the hose underneath the radiator
put your hosepipe in the radiator cap
and allow water to flow through till its clear
then replace the radiator hose and refill with coolant

Dec 26, 2014 | 2000 Oldsmobile Silhouette

1 Answer

How do i remove the radiator

No special tools

Half Fractional,Half Metric-- bolts & screws

Safer to remove the fan, so you don't damage the radiators
going in & out, or put cardboard over the fan

May 22, 2014 | 2000 Oldsmobile Bravada

1 Answer

How much is a valve job on 2000 olds silouette van

Sell it- would be the best idea

Go to You Tube Video first & see all
the engine issues there

Your going to put twice the amount into
the motor, than the vehicle is worth

Mar 21, 2013 | 2000 Oldsmobile Silhouette

1 Answer

How do I change spark plugs

The easiest way is to remove the wiper module, remove the upper front engine mount struts and use a ratcheting tie-down strap to pull with and rotate the engine forward so you have room to reach over the top of the engine.
You are now gaining an understanding of why a professional shop wants about 2-1/2 hours of labor time to screw in 6 little spark plugs. Most people do no have a clue...they just fuss about the price! After all...ANYBODY can unscrew a spark plug!!! :-)

Nov 12, 2011 | 2002 Oldsmobile Silhouette

1 Answer

Where is the drain plug for the radiator on a 2000 olds bravada

It will be on the bottom of the radiator if it has one. If you do not find one simply remove the lower radiator hose to drain the antifreeze out.

Sep 14, 2011 | 2000 Oldsmobile Bravada

1 Answer

Where is my gas line located in a 2000 oldsmobile silouette

  • Well, the fuel lines start from the top of the tank. You can follow them under the undercarriage of the van up behind the engine to the fuel rails to the fuel injectors.
  • Hope this helps and thank you for using fixYa.

Regards, Tony

Jun 16, 2011 | 2000 Oldsmobile Silhouette

1 Answer

Turn signal relay

look in the fuse/relay box under the hood

Mar 19, 2010 | 2001 Oldsmobile Silhouette

1 Answer



Low coolant - check and refill if necessary
Thermostat is stuck shut - replace
Radiator clogged - clean fins of radiator. Have the radiator flushed.

Jan 28, 2010 | 2000 Oldsmobile Intrigue

1 Answer

2002 olds silouette - Windows started fogging up on wet days

have you replace the 2 cabin filters in the glove deparment

Dec 30, 2009 | 2002 Oldsmobile Silhouette

1 Answer

Oldsmobile silhoutte 2000 thermostat

Follow the upper radiator hose down to the thermostat housing. there should be 1 bolt holding it in place. it is not easy but you have to remove that 1 bolt,remove the housing and replace the stat. assy.. carefull the stat doesn't move during reinstallation.

Good luck

Aug 30, 2008 | 2000 Oldsmobile Silhouette

Not finding what you are looking for?
2000 Oldsmobile Silhouette Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides