Question about 1994 Oldsmobile 88

Open Question

Were is the heater core hoses located - 1994 Oldsmobile 88

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: problems with locating heater core in 1997 oldsmobile achievea

U must remove the entire dash to service the heater core, once the dash is out then the heater core case must be split to get core out.

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the heater core located and how to change the heater core on a 2000 Nissan frontier 2.4 L cylinder


If it has a AC you have to pump down the AC remove the entire heater and AC unit so you can disconect AC lines and heater hoses ,you have to drop the steering column and remove the glove box, its a big job I would buy a manual so you know what all you have to disconect.

Mar 02, 2015 | 2000 Nissan Frontier

1 Answer

Need to know where my Heater Core hoses hook up to on the engine? I see the Hoses but is there a seperate part that the hose connects to?


The best way to locate a heater core hose is to determine where the heater core is located. Many vehicles have the heater core inside the dash. Other vehicles, usually larger vans and trucks, will have a heater core box inside the engine compartment. Once you have determined where the heater core is located in your vehicle, that will allow you to easily locate a heater core hose. If the heater core is inside the dash, you'll need to examine the firewall for the hoses. If it is in a heater box, you'll need to look around the engine compartment for the box.




Heater cores located inside dashes can be very difficult and time consuming to replace. Depending on the layout of your engine compartment, it can also be difficult to locate a heater core hose. If there is very little clearance between the engine and the firewall, you may have difficulty finding the hoses. You might need to use a flashlight to look from the underside in some cases. You will typically be able to identify the heater hoses where they enter the firewall by looking for two two small diameter hoses that protrude into the engine compartment. You can then trace those hoses to their other ends, where they will typically connect to a thermostat housing, the radiator, or a t-connector.


Hope this helps.


know more about your car

Sep 12, 2012 | 1996 Lincoln Town Car

1 Answer

How to replace the heater core


1

Lift up your car's hood and locate the heater core. If you are not sure where the core is located, an auto parts store employee or a repair manual can help.
2

Remove the screws or bolts that hold the heater core in place. You may need to remove other parts of the car before being able to access the heater core.

3

Disconnect the intake and outtake hoses from the heater core. You may need a special tool to remove the couplings that connect the hoses to the heater core; refer to your car model's repair manual.
4

Remove the heater core. Be careful not to tip the core over, as coolant will leak out.
5

Reconnect the upstream and downstream hoses on the new heater core in the same matter that they were attached to the faulty core. Leaks can occur if the hoses are not connected properly.
6

Screw or bolt new heater core in place. Finally, replace all of the removed car parts.

May 10, 2012 | 1993 Cadillac Eldorado

1 Answer

How to replace the heater core to a chevy astro 2003


  1. Drain the engine coolant.
  2. Reposition the outlet heater hose clamp at the heater core.
  3. Remove the outlet heater hose from the heater core.
  4. Reposition the inlet heater hose clamp at the heater core.
  5. Remove the inlet heater hose from the heater core.
  6. Remove the screws that retain the cover to the heater case assembly. This is located underneath the dash on the passenger side.
  7. Remove the straps that retain the heater core to the heater case assembly.
  8. Remove the heater core from the vehicle.

Sep 05, 2011 | 2002 Chevrolet Astro

2 Answers

Leaking antifreeze between firewall and motor on passenger side. just started when i tried to use the heater. could it be the heater core and where is it located


Could be the heater core, or where your heater hoses connect at the firewall. Heater core leak would more than likely put steam in the vents of you car when heater is on and hot and fan on. If the leak is just in the engine compartment, it`s a hose or a loose connection.

Apr 18, 2011 | 2002 Pontiac Montana

2 Answers

Where is the heater core located? Will I have to remove the entire dash to get to it?


Pass side behind glovebox, and No just glovebox area has to come apart.

Mar 08, 2011 | 2003 Chevrolet S-10

1 Answer

Replace heater core


Hello,

To replace the core of your GMC 2001 Jimmy, You will be needing these instruments, Repair manual, Socket set, Screwdrivers, once You have them together, please follow the steps below:
  1. Lift up your car's hood and locate the heater core. If you are not sure where the core is located, an auto parts store employee or a repair manual can help.
  2. Remove the screws or bolts that hold the heater core in place. You may need to remove other parts of the car before being able to access the heater core.
  3. Disconnect the intake and outtake hoses from the heater core. You may need a special tool to remove the couplings that connect the hoses to the heater core (refer to your car model's repair manual.)
  4. Remove the heater core. Be careful not to tip the core over, as coolant will leak out.
  5. Reconnect the upstream and downstream hoses on the new heater core in the same matter that they were attached to the faulty core. Leaks can occur if the hoses are not connected properly.
  6. Screw or bolt new heater core in place.
  7. Finally, replace all of the removed car parts.
That is how to replace Your heater core.
Hope this was helpful. Thank You for using FixYa!!!

Jan 12, 2011 | 2001 GMC Jimmy

1 Answer

I need to replace the heat core in my blazer... how do i do this?


Draining the Cooling System
  • Park the vehicle on a level surface. If the engine has been running allow it to cool completely.
  • Drain the cooling system. Remove the radiator cap from the radiator. Locate the petcock valve on the lower corner of the radiator. Place a waste oil collection pan underneath the petcock valve and turn it counterclockwise to open. Allow the cooling system to drain completely.
  • Label and remove the heater hoses from the heater core. The heater hoses will connect to the heater core in the engine bay, on the firewall, on the passenger side of the vehicle. Use either the Phillips or the flat-blade screwdriver to loosen the hose clamps that secure the hoses to the heater core. Then pull the hoses off the heater core.
Removing the Heater Core
  • Remove the heater core cover. Move to inside the passenger compartment. Locate the heater case. It will be bolted to the firewall, below the dash on the passenger side of the vehicle. Use an appropriate sized socket or wrench to remove the five screws that connect the heater core cover to the heater case, and remove the cover.
  • Remove the steel straps that secure the heater core to the heater case. Unscrew the four screws that connect the steel straps to the heater case using a socket or wrench and remove the straps.
  • Remove the heater core by pulling it out of the heater case.
Installing the Heater Core
  • Place the new heater core into position inside the heater case. Be sure to carefully guide the inlet and outlet tubes through the holes in the firewall.
  • Reinstall the heater core retaining straps, by reinstalling the four screws that secure them.
  • Place the heater core cover into position over the heater case and reinstall the five screws that secure it.

Refilling the Cooling System
  • Reconnect the heater hoses to the heater core. Slide the hoses onto the inlet and outlet fittings that extend through the firewall, and tighten the hose clamps.
  • Close the petcock valve on the lower corner of the radiator by turning it clockwise.
  • Refill the radiator with a 50/50 mix of antifreeze and water.
  • Reinstall the radiator cap onto the radiator.
  • Run the engine and visually inspect for leaks.
Good luck and take your time, keep me posted and don't forget to rate please.

Jan 08, 2010 | 1989 Chevrolet S-10 Blazer

1 Answer

What do i have to remove to replace the heater core in my 1991 chevy s10 with a 2.8 v6


Draining the Cooling System
  • Park the vehicle on a level surface. If the engine has been running allow it to cool completely.
  • Drain the cooling system. Remove the radiator cap from the radiator. Locate the petcock valve on the lower corner of the radiator. Place a waste oil collection pan underneath the petcock valve and turn it counterclockwise to open. Allow the cooling system to drain completely.
  • Label and remove the heater hoses from the heater core. The heater hoses will connect to the heater core in the engine bay, on the firewall, on the passenger side of the vehicle. Use either the Phillips or the flat-blade screwdriver to loosen the hose clamps that secure the hoses to the heater core. Then pull the hoses off the heater core.
Removing the Heater Core
  • Remove the heater core cover. Move to inside the passenger compartment. Locate the heater case. It will be bolted to the firewall, below the dash on the passenger side of the vehicle. Use an appropriate sized socket or wrench to remove the five screws that connect the heater core cover to the heater case, and remove the cover.
  • Remove the steel straps that secure the heater core to the heater case. Unscrew the four screws that connect the steel straps to the heater case using a socket or wrench and remove the straps.
  • Remove the heater core by pulling it out of the heater case.
Installing the Heater Core
  • Place the new heater core into position inside the heater case. Be sure to carefully guide the inlet and outlet tubes through the holes in the firewall.
  • Reinstall the heater core retaining straps, by reinstalling the four screws that secure them.
  • Place the heater core cover into position over the heater case and reinstall the five screws that secure it.

Refilling the Cooling System
  • Reconnect the heater hoses to the heater core. Slide the hoses onto the inlet and outlet fittings that extend through the firewall, and tighten the hose clamps.
  • Close the petcock valve on the lower corner of the radiator by turning it clockwise.
  • Refill the radiator with a 50/50 mix of antifreeze and water.
  • Reinstall the radiator cap onto the radiator.
  • Run the engine and visually inspect for leaks.
Good luck and take your time.

Dec 10, 2009 | 1991 Chevrolet S-10

1 Answer

2003 malibu


A heater core is located behind the dash on the passenger side. If you look under the hood you will see 2 heater hoses going to the fire wall again, on the passenger side, your heater core is located behind the hoses. You will need to take the dash loose or off to get to the air box the heater core rides in.

Mar 01, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...