Question about 2000 Mazda Millenia

1 Answer

I started my car this morning and the check engine light came on and stayed on. I drove the 3 miles to work, shut the car off, and now when I try to start it all the lights and everything seem to work fine but it won't turn over or so much as click. Tried to reset it pulling the negative cable for a while, tried to jump it and tried to find any loose connections. I'm stuck on a secured facility and cant get it out to have someone look at it without a towtruck... Any Ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Is battery charge ok? Try to replace battery or charge it from other car.

Posted on May 20, 2011

  • Jason Franke
    Jason Franke May 20, 2011

    Tried that... No luck.

  • Alex May 20, 2011

    Check that all wires are connected to starter, sometimes a thin one (responsible for starter clutch engagement) has poor contact.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Dodge Sprinter abrupt engine shutdown.


need more info does it run warm

Jan 29, 2014 | Cars & Trucks

1 Answer

1997 Plymouth Breeze Engine keeps shutting off.


You need to do an OBD2 engine control module fault code test to see if the fault is recorded in the memory of the computer control module. Autozone and others do this testing for free.

Jun 24, 2017 | 1997 Plymouth Grand Voyager

1 Answer

I have a 2004 Yukon denali and while driving, I got check gas cap alarm. 2 miles later check engine light is on. Checked gas cap, cleaned gasket and tightened. Drove for 2 days. Reset fault and drove 160...


Hello, have you tried to unhook the negative side of the battery for about 10 minutes and then go from there . It should reset the computer completely .

Sep 14, 2011 | 2003 GMC Yukon Denali

1 Answer

Yesterday the Brake light and the ABS light stayed on when I started up my car (2001 Jimmy). I drove it home from the store (approx 3/4 mile) and parked it. Later I started the car up and the lights did...


yes its better to go shop and check what is the code so that u can easy to diagnose and repair..some problem of the abs light come in out is some abs defective or loose ,,or the abs motor ssy have problem or sensors in the wheel.

Aug 30, 2010 | 2001 GMC Jimmy

1 Answer

Heard a knick-knack sound and then the engine shut


knock sensor is working at least right but unfortuanantly thats all that is working

it is likely a knock isue check the motor oil it is not un usual for a nisan to knock when the oil is low but on rare ocation it will kick so hard the knock sensor will activate

Mar 23, 2010 | 1994 Nissan Quest

1 Answer

Check engine light stays on.


You've made the correct decision. Let the dealership diagnose the issue. They'll tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Jun 04, 2009 | 2006 Hyundai Sonata

1 Answer

Oil pressure light comes on after driving on highway for 10 miles


Sounds like your sending unit sensor - if it was your pump going out, your engine would be history by now. Rule of thumb, if your oil check light ever comes on, it's usually too late to remedy the problem. You have a major issue, but since you've obviousely drove it quite a bit since then and it still hasn't seized up, I'm guessing you're ok...for now. Since you took it to a shop and they said you're ok, I'm assuming they checked your level and visually checked for leaks and found nothing. Either, you've got somethijng partially blocking your pick-up tube for the pump which is in your oil pan, or a electrical issue with the sensor. I would start by having someone check the sensor out and go from there...good luck.

Dec 29, 2008 | 2002 Jeep Liberty

2 Answers

Stalls / Dies / dead


this engine fuel pump prassurae low. it fuel pump celan. Your problem sovel

Jul 13, 2008 | 2003 Ford E150

Not finding what you are looking for?
2000 Mazda Millenia Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...