Question about 1989 Cadillac Sedan DeVille

1 Answer

Changed ignition switch, starter and battery. Panel lights comes on but still will not start.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 2,184 Answers

That leaves nothing else but the anti theft system. The security system can actually turn your starter off. Since you've put a new ignition on there, (assuming from auto zone or something like that) 14 times out of 15 its the wrong one to match your car. Probably wasnt the problem anyway. Was probably your TDM (theft deterrent module). Your best bet is to bypass the entire system and that car will fire right up. Here is a link all about it with DO IT YOURSELF solutions too. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition switch on dodge dynasty?


I had a similar problem years ago. As long as your dash lights come on, it's likely you can use an external pushbutton switch to run the starter. There are likely just 4 wires on the ignition switch. Power from the battery, and switched to:
accessories
main car stuff (dash lights, ignition, signals, etc)
starter.
splice in wires from battery and starter to new switch, and you're good to go. This worked for years on my old car.

Jun 01, 2015 | 1992 Dodge Dynasty

2 Answers

Lots of power, dash lights up but no ignition power to starter, relay changed, neutral start switch changed, fuses good.


Well, looking at the schematic, there is the IGN A (Fuse 6) in the under-hood fuse block feeding power to both the ignition switch and to the NO contact of the starter relay. Turning the ignition switch to the START position sends this voltage thru the CRANK (Fuse 8) in the instrument panel fuse block and thru the PARK/NEUTRAL position switch, thru the starter relay coil to ground. This should activate the Starter relay and pass voltage to the starter solenoid to ground, activating it. One the starter solenoid activates, batter power is sent to the starter motor, activating it. If, as you say, the fuses are good, the starter relay was replaced and is good, and the Park/Neutral position switch was replaced and is good, then then only items left are the ignition switch itself, the starter solenoid/motor, or the wiring of the circuit.

Mar 12, 2015 | 2000 GMC Yukon XL

1 Answer

1998 chevy asto van wont crank or turn over


Turn the headlights on and watch them while the key is turned to start. If the lights go out, one of your cables or connections at battery or starter is not good. If lights dim a lot but stay on, possibly a bad starter, it needs testing. If lights aren't affected by cranking position, turn lights off, pull the small wire off the starter solenoid, hook up a test light to ground and to the solenoid wire. Light should come on when key is held in crank. If it does, likely a bad starter solenoid. If no light, then the start circuit from ignition switch to starter solenoid is not working. Check for power out of ignition switch on the start wire with key in crank, to begin with. If powered, switch is good, need to check if neutral safety switch is good, and then check or swap in a new starter relay.
Post back with any results.
Good luck.

Jan 17, 2013 | Nissan Altima Cars & Trucks

1 Answer

Dashlights and high beams wont come on


Play with the ignition switch,If you can disable the starter when the engine is running and can do it in a very safe manner,this way you can turn the ignition and check to see if a ignition electrical part is failing, If you cant disable the starter just be careful how you turn the ignition you are only ruling out the ignition switch electrical part as possible problem or even the solution

Mar 08, 2012 | Cars & Trucks

1 Answer

Won't start


Switch on head lights or cabin light. If they doesn't come on or is weak, the battery is flat. Ensure that you switch off the lights.
With ignition switched on, assuming the lights on the instrument panel cames on and your immobiliser is deactivated, turn ignition to start. You should hear the solenoid at the starter making a click sound. If not, the battery is flat or the starter solenoid is faulty. If it does make a click sound, the battery could be too low to turn the starter or the starter is faulty. Assuming the immobiliser is working correctly, and the starter tries to turn the engine but it doesn't want to turn, the gasket could be blown and the cylinder filled with water, or the engine could be seized.
Hope it is not the last case. MarioCpt

Mar 06, 2012 | 1999 Toyota Corolla

3 Answers

2002 mazda protege 5 will not start - will not turn over, starter is fine, battery is new, power is going to the starter, everything is clean, is in park or neutral, no clicking sound at all, fuses are...


Help please....I have Mazda Protege 2002...the car was driving good..and suddenly the car didn't start at all i changed the starter the battery is fine because when i start the car the lights comes on and the radio works. I don't know what is the problem is...when i start the car it makes noise of tik tik. Please help me????

Oct 05, 2009 | 2002 Mazda Protege

2 Answers

My 1996 dodge stratus es wont start!


sounds like the starter here is why....
fuse blows in the under hood fuse block because the draw is to high to the starter. I got lucky and changed to a higher amp fuse to start the car to get in to my garage..... DO THIS ONLY ONCE AS HIGH CURENT IS NOT THE FIX,

May 25, 2009 | 1996 Dodge Stratus

1 Answer

Will not start tried everything


sounds like a dead s wire to the starter if you can jump it across thers no power to s wire

Apr 05, 2009 | 1994 Honda Accord

1 Answer

WONT START


Thai is either ignition cylinder or starter coil, or a problem with starter motor/wirings to starter motor.

The starter motor must be energized directly (in neutral, and possibly using a remote switch) to check that is working.

If the starter motor is fine, check that there is power coming to starter motor when you ignite.
If there is no power, test power at ignition and eventually replace ignition.

Feb 18, 2009 | 1998 Ford Escort

2 Answers

H2 Hummer


Today 11-12-08 my 2003 H2 Hummer would not start. Checked battery it ischarged. Cables tight. Tried to start with portable booster pak. No go. Tridto jump start with my wife's Suburban. Still no go.
When I turn the switch I hear a single click and that is it. No engine turning over. While trying to start with key the headlights go out. Out of ideas, Will take to Chevy garage in am. Will post solution.

Aug 23, 2008 | 2003 Hummer H2

Not finding what you are looking for?
Cars & Trucks Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...