Question about Oldsmobile Cutlass Ciera

1 Answer

Uper intake manafold for a 1996 olds ciera with a 3100 3.1 v6 the botton heater holes runs up to it and it started to leek but i can't fine where the leek is coming from

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,585 Answers

3.1 and 3.4 engines are bad for intake manifold gasket leaks. Check in the valley for coolant.

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is causing my 90 pontiac firebird 3100. v6 to be pouring antifreeze out the back side of the motor


Most probable would be the intake gasket. Make sure heater hoses are not leaking.

Feb 07, 2016 | Pontiac Cars & Trucks

1 Answer

What is the intake torque sequence for a gm 3100 v6 engine on a buick skylark custom?


I'm an old timer.Just run all the bolts down to snug,start from center and go in an outward direction half torque.Then do it again to full torque.Otherwise,any PepBoys carry Hanes manuals for every vehicle on the road.Cheap too,12 to 15 bucks.

May 02, 2014 | 1996 Buick Skylark

1 Answer

Help with1995 Oldsmobile Cutlass Ciera SL Code reader scan tool


You need to buy an OBD1 Code Reader
1996 started OBD2 Systems

Jul 06, 2013 | 1995 Oldsmobile Cutlass Ciera

2 Answers

Where is the egr valve on a 93 olds cutlass ciera v6


It dosent have one i checked at auto parts store and its correct no egr

Jan 24, 2012 | 1993 Oldsmobile Cutlass Ciera

1 Answer

1996 oldsmobile ciera has hole in radiator that I patched with jb weld, did not keep hole closed, later car will drive fine, until it is sit at idle or at a complete stop, the car will run hot and cut off....


well if the leak is bad enough you should just replace the radiator. A cooling system relies on positive pressure to operate correctly. All that stuff they sell such as stop leak and bars, etc is just a temporary fix. If your coolant is not able to circulate through the motor completely you will have problems, warped head, blown gaskets, no heat also. I would just go to a scrap/junk yard and find a radiator. It will be pretty cheap since it is a 96 Olds.

Dec 28, 2009 | 1990 Oldsmobile Cutlass Ciera

1 Answer

How do you replace the heater core of a 1996 cierra wagon 6 cyl


  1. Remove air cleaner and duct assembly.
  2. Drain coolant.
  3. Rotate engine forward on 3100 only.
  4. Both heater hoses at heater core.
  5. Right and left instrument panel sound insulator.
  6. Rear compartment heat duct adapter bolt/screws and adapter.
  7. Heater outlet duct bolts and duct.
  8. Heater core cover.
  9. Heater core.

Dec 26, 2009 | 1996 Oldsmobile Cutlass Ciera

2 Answers

Intermittant p0302,p0305 codes misfires


A code P0305 may mean that one or more of the following has happened:
· Faulty spark plug or wire
· Faulty coil (pack)
· Faulty oxygen sensor (s)
· Faulty fuel injector
· Burned exhaust valve
· Faulty catalytic converter(s)
· Running out of fuel
· Poor compression
· Defective computer

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires , distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad, especially given you had water issues. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced.
I've also heard in other cases the problems were faulty fuel injectors.

Nov 10, 2009 | 1996 Oldsmobile Cutlass Ciera

3 Answers

I need the firing order for a 1996 olds cutless cierra with a 3100 please


Your order is 1-2-3-4-5-6
Coil packs:
5/2 3/6 4/1
Cylinders:
1 3 5
2 4 6

Hope this helps,
matt

Oct 14, 2009 | 1996 Oldsmobile Cutlass Ciera

1 Answer

I need to replace an intake gasket on a 95 oldsmobile cutlass ciera 3100 v6 front wheel drive. Any sugestions on how to remove the old gasket?


If you have never done this before, get a manual such as haynes. There's just too much to write out instructions here. When doing the job, make sure that you drain coolant first, and remove any debris that falls into engine after the intake is off. Regardless of how careful you are, some will remain so I recommend that after it's back together, run for about 1/2 hr then change engine oil.
good luck....If you need assistance with any specific problem along the way post back!!!

Mar 21, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

Difficulty starting


Could be throttle position sensor, idle air control motor, mass air flow meter, egr valve... if it hasn't had a tune up I would recommend it, since its over 12 years old those spark plugs and wires could use changing if it hasn't been done before.

Take it to a shop for diagnostics to be sure. It's hard to fix/diagnose something that is intermittant.

Sep 02, 2008 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...