Question about Toyota RAV4
basicly its a evapsystem code. remove your gas cap and reinstall it making sure you turnit at least 5 clicks.
could be vacumm hose also but gas cap most likely
Posted on May 20, 2011
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
- Excess vacuum
- Purge flow during non-commanded conditions
- Fuel Level and Fuel Pressure sensor faults
- EVAP Purge and Vent Valve faults
The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.
P0441 1998 Toyota Camry Evaporative Emission Control System Incorrect...
Possible causes - Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
P0441 Toyota Evaporative Emission Control System Incorrect Purge Flow
Jun 01, 2015 | 1998 Toyota Camry
Nov 12, 2014 | 2000 Toyota Camry
Jan 10, 2014 | Toyota Cars & Trucks
May 24, 2013 | Cars & Trucks
Aug 19, 2011 | 2004 Toyota ECHO
Apr 01, 2011 | 2000 Toyota Camry
Jun 04, 2010 | 2000 Toyota Tacoma PreRunner
144 people viewed this question
Usually answered in minutes!