Question about 2000 Ford F350 Super Duty Super Cab

1 Answer

I have a F350 7.3 deisel that wont start. Starter wont do anything. has new batteries. lights and everthing else works

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 594 Answers

Is the truck standard or auto
is there a click or as stated nothing
are the wires at starter clean and tight
is there power going to starter selenoid (signal wire)
if auto try starting in nutral
if standard try to by pass clutch switch
is power going across starter selenoid
is the ignition fuse all o.k.

Posted on May 20, 2011

  • scottdavis42 Aug 01, 2011

    try the brushes on the starter take it off and have it rebuild or just change the brushes. The start is a dc motor and the brushes wear ou. My truck has 200000 miles and just hade to change brushes cost me 20 dollars but I done it myself

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 nissan maxima wont start or say anything even with a new battery!!


The starter doesn't spin? Do you hear a click (when you try to start the engine) from the starter area maybe?

Jun 24, 2016 | 2004 Nissan Maxima 3.5 SL

1 Answer

2004 volvo s40 deisel wont start.


connections at the starter or the starter itself. see that the engine can in fact turn over, that it has not seized. the starter has two connections, one big and one small. check that the small one is getting 12v when the key is turned to the start position. if it is, then the starter needs to be rebuilt or replaced

Mar 12, 2013 | Cars & Trucks

2 Answers

Connected battery wrong, everthing works but wont crank, here noise in starter


If the battery is working, it may not be charged up enough to actually turn the motor over. You may need to charge it overnight.-----------------------------------------------------------------------------------
auto HID Xenon light

Jan 21, 2013 | 2006 Mazda 3

1 Answer

A Deisel jetta need to replace glow plug rely ,,where is it..?? And its very very hard to start ..is this going to do it and how do you know if the deisel is worth keeping it has like 300,000 _ thanks...


not always the golw plugs can be bad and the engine can be low on compression. does it start alot better if you add a gallon of kerosene to 5 gals of desiel? Or a quaart of gas? the glow plugs can be checked with a test light the connectrs are in plain veiw and the wires going to them are big. Follow the wires back to the relay they go straight there, the relay is real close to the battery as it draws alot of power follow the big wire on the battery that doesn't go to the starter and thats the glow plug relay. they last good but the connections get dirty, reconnect all the connectors on itand see with the key on if the glow plug light comes on on the dash that wire that lights the light is the same wire that lights the light fires the glow plugs. You can take the wire off the glow plug( you need to do it anyway it's a yearly service anyway and with a test light connected to power touch the disconnected glow plug with the lights probe and the light should light, not all of them are likly to be bad but if you find two or more just change them all as the ones that aren't out are likly to fail anytime and if you want to drive though the winter you need all the help you can gt. the battery cables and the one going to the glow plug relay are likly to fail at the battery so go over this good It might start fine with just two glow plugs working I'd pick the two center cyclinders or the two outboard ones as once the engine starts it'll keep running long enough to start the other ones. low voltage as your cranking can effect the glow plugs but the relay is suposed to turn the glow plugs off at cranking and time out after they've been on long enough. dirty connections are almost always the problem so clean everthing before you replace anything. Needs cleaned before yu put on new parts anyway and the glow plugs need to be taken out with the right tool or you may end up with a broken off glow plug in your cyclinder head.

Oct 01, 2010 | 1991 Volkswagen Jetta

2 Answers

2002 ford explorer wont start even after new battery...


Before you go changing out the starter check for a burnt out fusible link going to the starter it will look like a wire but acts as a fuse and they burn in two just like a fuse. The symptoms you just describe are those of a burnt fusible link.

Mar 26, 2010 | 2002 Ford Explorer

1 Answer

The motor acts like it is stuck. it has new batteries and new starter, changed the oil, new fuel filter, and when i turn the key the motor turned over about 2 revolutions and now it just wont turn anymore....


The first thing i would do is try turning over the engine by hand making sure the engine itself is not seized. if it turns over by hand check to make sure your getting 12 volts down at the starter. sometimes starter cable gets corroded causing slow or even no start. if thats good, check to make sure you have a good ground from your batteries to your engine. your starter gets its ground from its case which is mounted to the engine. if the engine isnt grounded you wont have a complete circuit.

Feb 03, 2010 | 1986 Ford F 250

1 Answer

2003 ford F250 6.0 deisel..it will crank but will not start,cam and crank wil not synchronize..both are new. oil gauge wil not show pressure while cranking RPM.is around 48 rpms on a scan tool...


I HAVE A 7.3 DEISEL AND I DONT KNOW IF THE 6.0 HAS ONE OR NOT BUT MY CRANK SHAFT SENSOR WENT BAD AND THE TRUCK WOULD NOT START( JUST TURN OVER ) DEALER PUT NEW CRANK SHAFT SENSOR ON MINE AND FIXED THE PROBLEM...HOPE THIS HELPS...

Nov 29, 2009 | 2003 Ford F250 Super Duty Crew Cab

2 Answers

My prelude wont start for anything


if the battery is good and this happens, usually the starter is dragging internally, a new starter will fix this, starter normally comes with a new solenoid.

Mar 24, 2009 | 1990 Honda Prelude

1 Answer

Jag x type deisel


Hi Wyne

Check all the battery & starter motor terminals, if all OK, a new starter motor will be the answer !

Good luck !

A fixYa rating would be much appreciated Please !

John .

Feb 08, 2009 | 2003 Jaguar X-Type

Not finding what you are looking for?
2000 Ford F350 Super Duty Super Cab Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...