Question about 1998 Ford Expedition

1 Answer

1998 Ford Expedition will not shaft into drive when igination is in the start position, having to turn the key back into the accessory position in order to get the gear to go into drive, have replaced the neuraal sensor in the transmission, have checked the brake sensor all test indicated (ok).

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,585 Answers

There is a solenoid on the shifter that releases when in run position. if you are having to put in accessory to get in drive and start in neutral . then the ignition switch is bad.

Posted on May 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 ford expedition theft light flashing wont crank but turns over


try disconnecting the battery negative with the key in the run position..this kills the computer..then shut the key off and reconnect the negative cable, turn the key to run position and listen for the fuel pump to come on 2-3 seconds try to start..repeat this 2-3 times if still an issue.. repost findings

Jan 19, 2013 | 1999 Ford Expedition

1 Answer

Cigarette lighter jack and outlet next to console no longer work. 2005 ford expedition.


Have you tried putting the key into the ignition and turning it to just before the start
position? Some vehicles do not operate the accessory jack with out the key in the
accessory (back) or just before the start position. If it still doesn't work, look for the fuse
marked ACC in the fuse panel. Hope this helps.

Jun 24, 2011 | 2005 Ford Expedition

1 Answer

I have a 1998 Ford Windstar. Got in to drive, turned the key to start and 'snap' something seems to have broke within the ignition lock cylinder... all of the accessories are on... the key...


This happened to to me with my ranger. I went and bought in ignition and a junk yard and no problems after that. That way your not out of a lot of money.

Jun 02, 2011 | 1998 Ford Windstar

1 Answer

What can i do to program key for frod expedition 1997


In order to program your own chipped keys you need 2 keys that will start the vehicle. Start by putting the first key that starts the vehicle into the ignition and turn it to the run position(not the start position) and back to the off position. Within 10 seconds repeat this step with the second key that starts it. Then within 10 seconds put in the new key and turn it to the start position. The vehicle should turn on and the new key will be programmed. If you do not have 2 keys that start the vehicle then you will have to take it to a Ford dealership so that they can program new keys for you.

Mar 08, 2011 | 1997 Ford Expedition

1 Answer

The check engine bulb is blown in a 98 ford expodition 5.4 4 wheel drive


why do you say it is blown... very very rarely have i seen one blown...i have seen shops or used car lots remove the bulb or led.. does it light up when you turn key to the run position... if not have it scanned to see if ecm is turning it on...get back with me

Jan 03, 2010 | 1998 Ford Expedition

1 Answer

1998 Ford Expedition XLT 4 wheel drive switch is frozen in 4H


solenoid switch that engages the 4WD more likely will need replacing. fairly cheap to fix replace.

Oct 11, 2009 | 1998 Ford Expedition

1 Answer

1998 Ford Expedition air struts keep deflating.


You can check it for a leak by getting into vehicle and close the door.Turn ignition switch to on position and shift the gear shifter to neutral.You will hear the compressor turn on.Once compressor turns on put back into park,leave ignition on and exit vehicle.Compressor will turn off when you open door but will turn back on after you close it. Now listen at each corner to see if you can hear where your leak is.

Feb 26, 2009 | 1998 Ford Expedition

1 Answer

Ford Expedition Check Engine Light does not turn on...


perhaps a bulb is out in that panel! I wouldn't doubt it! good place to start

Dec 23, 2008 | 1997 Ford Expedition

Not finding what you are looking for?
1998 Ford Expedition Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...