Question about 2006 Pontiac Solstice

Open Question

Need to replace passenger side cup holder 2008 pontiac solstice

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: passenger side mirror

If you need to replace the entire mirror - it's a little involved. First you need to take the upper extension panel off from behind the mirror (black triangle) - just pull it of starting at the top. It will snap back on later. Next - remove the different screws holding the door panel in place (not the ones behind the mirror yet!) One is under the handle (pull it out and pull out the filler panel - small plastic thing that has a hole to pry it out). Then take off the rear red light - also pops off - and remove that screw. Finally - pick up the rubber filler where your fingers pull the door shut and remove these torx bolts.

Now is the tricky part. Snapp off the entire interior panel. It will pop off - but very difficult. It will sound like it is breaking! Start at the outer bottom corner - and use a door panel remover tool - check Amazon or E-bay - to keep from breaking things. Pull it out from all around the bottom and sides and then lift it up over the door lock. It good to have a friend help here. The panel will still be held on by a cable - that is your door release - leave it alone and let the panel hang by it (or better, put a box under it to rest on).

Now...remove the three bolts holding the mirror on - have a friend help hold the mirror while you do this or it will scratch your new car! Since the inner panel is off - you can also disonnect the mirror plus and remove it. It sounds silly - but the only reason to remove the door panel is to unplug it!

Get you new mirror and reverse the steps.

If you are just replacing the glass (non-heated) - get a replacement from the dealer. Adjust the mirror all the way to the inside and reach behind and pop it off. CAREFUL - put tape over the entire glass as it will likely break even more! Remove your connectors if heated - and replace (and reconnect) with your new glass. It just pops back on!

Replacing glass is easy - just be careful of cheap imitations on e-abay). And never use cheap flat glass on the passenger side! The DOT has special requirements for mirror glass - buy it from gmpartsdirect.com or your local dealer.

kb

Posted on Jan 08, 2009

Ad
  • 713 Answers

SOURCE: How to replace a the passenger side mirror

will have to remove the door panel unless it has a small piece in the upper corner by the mirror. should have three 10mm nuts that hold it on.

Posted on Aug 27, 2009

Testimonial: "Thanx for your very quick response!!!"

  • 1986 Answers

SOURCE: I need instruction on replacing the passenger side

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: Replacing side mirror on 2008 Dodge Grand Caravan

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: replace passenger side mirror on 2008 Impala

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is airbag module for pontiac solstice


i'm not sure why you would need to know this information as it is extremely dangerous to work on the air bag system without the correct equipment as the air bags are set of by an explosive devise and you would'nt want one going off unexpectedly with say your face beside it .if you need to know because your fitting some sort of mounting bracket ie satnav , cell phone i'd check with your local dealer , i've also included a link you might find interesting reference a recall for air bag problems by the manufacturer
2008 Pontiac Solstice Airbag Complaints

May 13, 2014 | 2008 Pontiac Solstice

1 Answer

Blower motor resister replacement


Passenger side in the footwell, there should be a wiring harness running to it. May have to look up underneath the dash a little but its there.

Nov 07, 2013 | 2008 Pontiac Solstice GXP

1 Answer

How do I replace the in-dash cup holder in my 2008 Pontiac Solstice?


dealer will have step-by step for you.. contact them..

Jan 25, 2013 | 2008 Pontiac Solstice

1 Answer

Where and what kind of fuse do I need to replace on a 08 pontiac torrent


It depends what fuse? Their are two fuse location, 1 is under the hood closest by the driver, the second 1 is on the front passengers side next to the glove box lower to the left by the map holders.

Mar 18, 2010 | 2008 Pontiac Torrent

1 Answer

Where is the fuse for the 2008 Pontiac Torrent Accessory Power Outlet ?


I dont have my owners manual on me, but if im not mistaken i thinks its on the passengers side, by the lower left leg by the map holders, but if not its under the hood drivers side behind the headlight closest to the driver!! hope this helps!!

Feb 02, 2010 | 2008 Pontiac Torrent

1 Answer

Problem with 07 Solstice Convertible latch


take it to the dealer it is under warranty

Jul 07, 2009 | 2007 Pontiac Solstice Convertible

1 Answer

Placement of jack beneath solstice


the best place for floor jacks is either under the rear axle or on the spot where you would place your OEM jack that came with the car your owners manual should have a diagram that shows you where these spots are.

Aug 28, 2008 | 2008 Pontiac Solstice

Not finding what you are looking for?
2006 Pontiac Solstice Logo

Related Topics:

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...