Question about Tesla Roadster

1 Answer

I want to conect a new pump to kwaski mule do not know wich wire or colour to conect to the live wire on the mule. I am afraid if i conect the wires the wrong way it will blow the new pump.

Posted by on

  • john_slipend May 20, 2011

    thank you, Job don


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Tesla Master
  • 5,370 Answers

You can ohm test the wire from the fuel pump to the fuse and make sure you get 0 ohm. if you get a high number, then there is a loose connect or bad wire. Black blue wire from fuel pump connects to black blue wire on fuel relay.And black yellow wire from fuel pump is grounding. Then from there one from relay goes to igniter and other wire from relay goes to ignition switch.
To see the wiring diagram, please click the link below:--- ------------- This should help.Thanks.Helpmech.

Posted on May 19, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What wire color code (function) on a clarion arx5170 stereo

red wire is live (battery) yellow wire live only when ignition is on, black wire is earth(car body) there should also be 4 pairs of wires green,white,grey and purple these are your speaker wires you'l notice with the pairs of same colour eg white one is solid colour one has a black stripe the solid colour goes to live + on your speaker the one with stripe goes to - on speaker, same goes for the rest of the pairs hope this helps

Mar 31, 2014 | Cars & Trucks

1 Answer

No power to the fuel pump

Follow the pumps wire back and @ each conector check for power with a DMM The conections can look like new but may not make a proper conection. also tug on the wires @ the connectors they may have corroded off just inside the plug case

Sep 24, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

I got a fuel pump and the wires that goes on the fuel pump are all white and the ones from the tank are difrent colors. i wana know wich wire goes on wich one?

I believe they should be pretty similar plug-ins (straight- straight or square-square). Cut one wire at a time and Wire them accordingly.

Mar 18, 2011 | 2002 Buick Century

1 Answer

93 volvo 850 no power at fuel pump but power at fuse and relay

Sounds like you have a broken wire between the fuse box and the pump..
Check colour on the pump wire and trace back to box.. if you cannot find it and its only the pump playing up run a new wire from the FEED side of fuse to the pump but remove the old wire before connection up.. Or use a test light to find the short in old power line..
Let me know how you go Ron

Oct 01, 2009 | 1993 Volvo 850

1 Answer

We are replacing the fuel filter in a 98 pontiac transport. The new wiring harness came with a purple, grey & 2 Black wires. The OE harness comes with purple, grey , black and a white/black. How do you...

Assuming you mean replacing the fuel PUMP, the 2 wires are different guages. Connect the lighter wire to the lighter wire and the heavier wire to the heavier wire. If the new harness uses both the same size wires, the heavier wire on the vehicle side (solid black) is for the fuel pump ground. Lighter wire is for fuel guage sending unit.

Sep 21, 2009 | 1997 Pontiac Trans Sport

1 Answer

Car radio harness colour code

work it out with a meter ,,,,find perm 12v feed neg and pos ---yes could be any coloured wire depending on car maker,after finding perm 12v feed for memory look for pos from ign switch,now speaker wires are easy as both will be same colour for a speaker but one will have a band through it if not sure or colour blind like yours truelly then use pos and neg on speaker wire till you hear a thump from speaker then you know you have the right wires and location of speaker ,,ie.. front left back right ect ....Now you are a fully experianced radio fitter ??

Dec 20, 2008 | 1993 Nissan Maxima

1 Answer

I need to know what the wiring diagram is for a 1983 Cj-7 with a 2.5 the wires fell against the exhaust melted now I have no ignition

Hi , how badly are the wires burnt. If you can still see the colours just cut the wires and join colour to colour.If you still have problems just phone me on 01978780731 I am a auto-electrician living in Wrexham . Rig

Aug 12, 2008 | 1983 Jeep CJ7

1 Answer

Stereo wiring

test all gronds and powers then the remaining cables use a AA batterie and conect one cable on each end on the baterie like on of on of like toching at times and that will make the speakers to sound for a little then you will identify every speaker then read the diagram on the radio and plug it in acording to the radio diagram

Jun 01, 2008 | 1993 Nissan NX

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tesla Experts


Level 3 Expert

75822 Answers

Brad Brown

Level 3 Expert

15557 Answers

Vernon Hardnett
Vernon Hardnett

Level 2 Expert

64 Answers

Are you a Tesla Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides