Question about 1998 Chevrolet Blazer

1 Answer

Question Was it very hard to replace? Also was it easy to get to to replace? Thank you for your suggestion by the way.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 397 Answers

The job was very easy.
If I remember correctly there are only two bolts holding the motor assembley itself on and the electrical connection is just one large plug.
It becomes a little three handed when you pull the motor forward and have to detach it from the wiper mechanism, again, if I remember correctly, there is only a one nut securing the wiper mechanism to the drive shaft of the motor and the shaft is "keyed" so that you dont have trouble lining the wipers up with the self park of the motor.
Sorry I can't be a little more specific but my truck is not here my brother inlaw is out in it and I have just checked my Haynes manual and there is absolutely no information in it about changing the wiper motor

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace heater coil for 1998 lincoln town car


Hi John,A heater core replacement is a very fragile and difficult job, I strongly suggest that you have a shop do this job. It is really easy to damage hard to get pieces, as well as the core itself....

Oct 17, 2011 | 1998 Lincoln Town Car

1 Answer

Eclipse 2001 mitsubishi gs passenger window wil go down but will not go up all the way


Hello and welcome to FixYa!

As a first course of action, I strongly suggest that you replace the window motor. Going down is easy for the motor even when it's faulty but you can expect that it's gonna be hard going up. Once replaced you'll be good.

Hope this helps and thank you for using FixYa! Have a good one!

Jul 31, 2011 | 1997 Isuzu Rodeo

1 Answer

The car shifts extremely hard and has a hard time accelerating


Hello and welcome to FixYa!

As a first course of action, I strongly suggest that you replace the transmission fluid. If the fluid is burnt, the car tends to shift hard. If the problem still persists, replace the torque converter. The torque converter controls the shifting and once replaced a smooth ride is noticeable.

Hope this helps and thank you for using FixYa! Have a good one!

May 02, 2011 | 2001 Buick Park Avenue

1 Answer

I have a really hard time getting the release button to work on my seatbelt. Any suggestions?


Hi and welcome to FixYa!

Is it hitting the seat when you try to grab the release button? You may want to tilt back the back rest of the seat for easy access to the release button. Or you may just bend the release button going forward if it has that option.

Hope this helps and thank you for using FixYa! Have a good one!

Mar 03, 2011 | Ford Taurus Cars & Trucks

2 Answers

Heater core leaking how do you replace it


Heater core replacement is a delicate operation, and it is very easy to damage fragile and hard to get parts. I suggest that you have a shop do this job for you.
Essentially the heater box comes apart and the core can come out. Not an easy job.

Feb 06, 2011 | 1991 Chevrolet K1500

1 Answer

Need to replace a hood release cable but first need to open the hood without a hood release lever. Any suggestions? Also may need to adjust the hood mechanism because the hood is so hard to release.


Hi!!
Grab the release cable with a pair of channel lock pliers to pull it open. Lubricate all release mechanism including the release lever, that will easy the release lever.
Good Luck!! A HELPFUL - 4 THUMBS - rating for this solution would be greatly appreciated. Thank you for using FixYa.

Jan 04, 2011 | 1991 Dodge Dynasty

1 Answer

How hard is it to replace the ignation switch and were can i get instructions to do it myself


It requires special tools and is not easy, suggest you take to a tech. with experience and tools. If you want to try to do it youtrself, I suggest that you get a "Haynes Repair Manual" from Auto Zone or O'Reilly's auto parts stores.

Oct 19, 2010 | 1997 Mitsubishi Montero

2 Answers

CAMSHAFT POSITION SENSOR. Where is it and how hard is it to replace? Thank you in advance.


Rather easy to find. Look to the right at front pulley, you will see a wired connection. But Why are you changing it?? This sensor seldom causes any prob!

Mar 27, 2010 | 2004 Nissan Quest

1 Answer

Replacing front driver side (F150) brake line (rubber hose)


Brake fluid is highly corrosive. If you can't get the line loose on the frame side then I would suggest replacing the hard line as well coming from the master cylinder. Or if you have a flaring tool you could cut the hard line just behind the rubber and put a new fitting on it. Pretty easy if you have the tool. Essentially you will wind up kinking or breaking the hard line anyway if the fitting won't come loose easy.

Apr 02, 2009 | 1990 Ford F150

1 Answer

Air Filter


remove the tube that connects the intake to the air flow sensor first

Oct 15, 2008 | 2001 Pontiac Montana

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...