Question about 1997 Toyota Camry

2 Answers

1997 TOYOTA CAMRY BRAKE PROBLEMS

BACK BRAKE LIGHTS DONT WORK REPLACED BULBS-NOT THE PROBLEM AND LIGHT STILL ON INSIDE LETTING ME KNOW SOMETHING IS WRONG-PEOPLE KEEP PULLING UP TO ME AND SAYING YOUR BRAKE LIGHTS DONT COME ON-HELP

Posted by on

  • Anonymous Jan 28, 2009

    My 1997 Toyota Camry back up lights do not come on. I need to get my annual state sticker. I cannot get a free estimate to fix this problem. Do you have any suggestions, please?

  • Anonymous Mar 21, 2014

    what could be the problem the fuses are good and it doesn't have the failure light sensor either can you help

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Try checking the switch located on the pedal it will be a bit of a tight place so if you have a work light and a mirror your in good shape check up at close to the top of the pedal there should be a small switch that should be attached to a part of the firewall it probably has come off there should be a little slide on clip or a screw to attach it . if the switch has come off make sure it works before you put it back on if it is in place and not broken then check your fuse for the brake/tail/turn light not sure if all on same fuse try the fuse first

Posted on Aug 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 2 Answers

Check the trunk wire harness right by the left side trunk lid hinge for broken wires. This is a common problem on these cars. If the wires are broken you will have to repair them. The best way is to add short lengths of wires to the breaks and solder them back together. Use electrical tape to recover the harness.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 toyota camry back window brake light is out how to change


Brake window light assembly just clicks off rear dash. IMPORTANT>Replace bulb from Toyota dealer or else brakelight warning light in dash will come on. Something to do with the proper ohms.

Nov 08, 2011 | 2000 Toyota Camry

1 Answer

Why is toyota camery backup lights such a problem? my reverse lights do not comeon...brake lights work fine.,..but i have no lights rear..when driving. i have no clue of where or how ot repair a switch and...


more likely than not the bulbs are bad remove the tail light assy inside the trunk you should see the wingnuts to turn then slide it out and replace the bulbs your olcal autoparts will do this for you if you ask nice

Feb 09, 2011 | 1998 Toyota Camry

1 Answer

1997 camry toyota rear running lights dont work. bulbs are fine and all other electronics work, why is this and how can i fix it?


look for a tail light relay and fuse--probably in the engine compartment relay box. Try swapping the tail light relay with the horn relay and see if the lights work. If yes, replace the relay. Please let me know if you have more questions.
jturcotte_26.gif

Nov 03, 2010 | 1997 Toyota Camry

2 Answers

1997, Camry. On the dash indicator states replace bulb, rear light failure warning light. So I checked ALL lights every one of them is working, back up lights, brake lights, tail lights, blinkers, hazards,...


Also, can be as simple as the bulb itself and the housing it sits in. Some bulbs are practically almost flat ... barely having a lil node or bump protruding out to make connection at the contact point. Also, check down in the housing where the bulb makes contact...... I had to add a lil solder.

Sep 12, 2010 | 1998 Toyota Camry

1 Answer

Replaced bulbs in camry replace bulb indicator light is still there when turn car on and hit brakes, double checked all lights to make sure they are on.


Check and make sure all the brake light bulbs have the correct bulb in them. Even if they work, if the incorrect bulb is installed it could put the indicator on.

Jan 10, 2010 | 1997 Toyota Camry

1 Answer

How to change a third brake light bulb for 1993 Toyota Camry?


open the trunk and look up along the top of the bumper and you should see two screws / nuts that secure the light assembly.

Mar 26, 2009 | 1993 Toyota Camry V6

1 Answer

Toyota rear warning light indicator


replace brake petal switch mounted above brake pedal.adrian

Feb 16, 2009 | 1997 Toyota Camry

1 Answer

How to reset rear light out indicator lamp


There is no "reset" for the rear lamp failure system. The light goes out automatically wehen all of the rear lamps (brake and tail) are working. Did you check the brake light in the lower part of the back window? Also note that the lamp sensor is very sensitive; it needs to see all the bulbs to be the same wattage. The wattages can vary from nfgr to mfgr. Let me know waht you find on the 3rd brake lamp in the back window.

Jan 11, 2009 | 2000 Toyota Camry

1 Answer

Broken brake light 1997 toyota camry


sounds like a bad bulb. the filament in the bulb will bounce around and reconnect its self sometimes. when it is out tap the lens with your finger tips if it illuminates replace the bulb and recheck. the problem may lay elsewhere, but this is a cheap easy place to start.

Nov 15, 2008 | 1997 Toyota Camry

2 Answers

Lights


The taillamp bulb and the brake lamp bulb are the same bulb. The brake part of the bulb has its own filament, as does the taillamp side. The brake filament is brighter than the tail-lamp filament.
What you have is "1/2" of the bulb is burned out.
Go out and buy a # 1157 bulb, and replace the right rear bulb. This will fix your issue.
Glad to help, and thanks for choosing FixYa.

Oct 22, 2008 | 1987 Toyota Camry

Not finding what you are looking for?
1997 Toyota Camry Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...