Cant find where the cam position sensor goes on my 2001 chevy blazer

http://www.youtube.com/watch?v=5gwta1NvtsQ


This may help

the mass airflow sensor needs replaced, can't be cleaned, when its bad thats it. second, tried to replace crankshaft sensor ? did you ? if you did , it must be adjusted so its perfectly flush, parralell with crank, it reads magnetic strips that send info to computer, works together with camshaft sensor, cam & crank must be in time with each other, timing is everything, cause you don't have a distributor. reinspect your crank sensor to make sure its mounted correctly. replace your MAS, with exact replacement, not aftermarket, see how this works, I'll be around to help you

Here's a link to your camshaft position sensor.

Thanks for choosing FixYa. Your cam is built in the distributor. You will have to change the entire distributor to fix it.

Fig. CMP (Camshaft Position) Sensor location of 2000-05 4.8L, 5.3L, 6.0L Engines

The camshaft position sensor is a part of the distributor

Crank sensor is primarily for the spark and the cam sensor is for fuel management, crank/cam correlation for misfire purposes I would also change the wires.

I had a similar situation and it was my wheel bearings.

camshaft position sensor

Does your battery go dead?