-   hi i have got a bmw 320i the near side fornt and back lights dont work and i have no brake lights to the switch is ok put main power from battery to brake light switch and nothink can any one help please thanks colin-   Guest
im picking you have an E36? common problem is one of two things.
1- the bulb holders on the tail lights are faulty, the connecters on the board of the tail light are faulty, easy to remove & check.
2- the brake light switch at the base of the foot pedal is faulty.
Was this helpful?
Yes
No
3 people thought this was helpful
Solution #2
posted on Sep 08, 2008
Guest
Rank: Apprentice
Rating: 0%, 0 votes
what does a brake light don't work indicator light looks like on a 318i 1995 bmw
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas?...
(More)
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas? thank you
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas?...
(More)
Im having a problem with the directional signals they work for about 2 seconds then stop any ideas? thank you
on a 1977 gmc pickup the fuel gauge does not work. I need to run a new wire from tank to gauge. old...
(More)
on a 1977 gmc pickup the fuel gauge does not work. I need to run a new wire from tank to gauge. old wire is nowhere to be found and there is no direct hookup to the gauge. it looks like it comes off of the fuse block but i cant figure out where. I need to know where to hook it up at. Can you help?
So I left my lights on today and it drained my battery almost entirely. I went to jump start the...
(More)
So I left my lights on today and it drained my battery almost entirely. I went to jump start the car, hooked up the jumper cables correctly to another running car, and my car won't start. I think the problem is that my alarm is activated, so when I turn the key, it doesn't do anything. It won't even try to start. But when i push the button on the pad to deactivate it, even with the jumper cables hooked up, it won't respond. i don't know what to do because I can't seem to disable the alarm system because my car is dead, but I can't start the car because the alarm is preventing the engine from reacting when i stick the key in. Does anyone know what to do? This is an after-factor alarm installment. I have a 2001 Honda Civic but Honda did not install this alarm.