Question about Volkswagen Polo

1 Answer

Hallo Polo 1.6i classic Need help with my clutch , did fit an new clutch kit , fly wheel was skim , and all the seals was replaced , a month after , it started slipping again , the fit new kabel self adjusting , but what is so weird in 1ste gear is don't slip .. What can be wrong ???? Please help.. Regards - Johan

Posted by on

  • brewis007 May 19, 2011

    Hi , thanks for the advise , my dad told me to check it , tell me if it is braked , that's way it is slipping ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Hi,at the side of the gearbox there is a green round cover when it is removed there is a fork like lever there they normally brake or it can be faulty clutch parts that is fitted.hope it is usefull

Posted on May 19, 2011

  • 3 more comments 
  • brewis007 May 19, 2011

    Hi , tanks for advise ! Was going to do it this weekend , my dad told me also to check it .. Is it possible that the clutch kit would be damage if it is that fork ?

  • conraad bester May 19, 2011

    jes it can be possible the clutch is damaged again.

  • brewis007 May 19, 2011

    And this polo have giving this past year just hassles, but the morrel of the story , when I sell it , the the next owner would have no problems , because I had fix almost everything..

  • conraad bester May 19, 2011

    hahaha,jes thats always the case

  • brewis007 May 19, 2011

    Going to let you know over the weekend when I had a look at the fork , have a gr8t night..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had clutch plate pressure plate an all those things replaced about 2 months ago but when I drive first and second gear scratches its a 2001 polo playa 1,6 what can I do please


it could be that there is air in the hydraulic clutch system ( if it is hydraulic ) or the cable is out of adjustment
If the problem was from the time that you took delivery of the repaired car then I would suspect that the clutch plate is in back to front an the clutch hub is hitting on the fly wheel bolts
However have the clutch system operation bled or adjusted first before you go back to the shop

Oct 30, 2015 | Cars & Trucks

1 Answer

Hi, i have a Tata indica 1.4 baseline 2007-model (manual gearbox). I put car in reverse and made a scratching sound. Now i can't get any other gears (1-5) besides reverse. What could be the problem? I


I do not know what your mechanic was thinking to do it that way. vehicle manufacturers do not make clutch parts so the clutch would have been made by a company that makes all the clutches to specs. Just because it was not in a TATA parts box doesn't mean that it couldn't be matched up size wise to a generic kit.
What ever has happened is because of the mechanic's modification and the way he fitted it.

Dec 19, 2014 | 2007 Tata Indica LEi

1 Answer

Mitsubishi challenger 1998


Were you careful not to get your hands on the face of the clutch disc too much? Any indication of oil or grease around the disc, like from a leaking rear crank seal, when you changed the clutch?
Did you bleed the slave cylinder, to get all air out of the system?

If still no help, someone will have to troubleshoot it. A new clutch should not slip, especially with the flywheel polished to smooth.

Dec 20, 2013 | Cars & Trucks

1 Answer

Flywheel or something grings against the starter when clutch is engaged


There is no way the ring gear will hit the starter pinion unless the fly wheel bolts on the crank shaft or loose allowing the flywheel to run out of true. If you have had clutch/ rear seal work done lately the fly wheel will only fit in one position and if that was ignored at some time then the fly wheel will run out and touch the starter pinion.. I would also check the adjustment on the starter pinion as it has to be set by the lever pivot to a correct distance or it will touch the teeth of the ring gear

Jul 28, 2013 | 2001 Ford Escort ZX2

1 Answer

Had new clutch kit fitted and mechined fly wheel new slave cylender and it is still slipping hyundai excel 1997


The clutch m/cyl has a compensating port that blocks up and doesn't fully release the clutch fork. Mostly the mechanic would have done what you asked to be done but as a matter of course he should have tested the clutch operation before handing back the car. I suggest you discuss the problem with him and explain that he hasn't fixed the problem that it came in for.

Apr 05, 2013 | Hyundai Cars & Trucks

1 Answer

Ford cougar clutch replacement 3 times in less than 3 years


you get a 12 month warenty with any clutch same as fitting if you going through that many clutches though did any one check the flywheel if its a duel mass fly wheel it could be damaged or groved causing the clutch to wear more quickley also the input shaft could be worn or warped or thebearing could be going causing movment i would go with fly wheel but i would have hell on if id paid for a job which is not cheap and its either never been done properly or they have used rubbish cheap parts you can go to traid and standards if your from uk or whatevers the equivelent abroud and send him a letter asking him to replace it free of charge i wouldent let it go though hope this helps ivan uk

Oct 08, 2012 | Cars & Trucks

1 Answer

My clutch went out on ac in my 1998 toyota tacoma 6cyl. I was told i need to repace verything. If so what parts do i need?


First check the slave cylinder for the clutch, this could be the only issue, if your hydrailics fail your clutch won't work

If you do indeed need to replace the clutch replace everything Clutch disk, Pressure plate, Throw out bearing, and Fly wheel This is not a job that you want to have to do again in 6 months
Most auto parts stores will sell a kit containing everything you need

Apr 02, 2010 | 1998 Toyota Tacoma

1 Answer

Difficult shifting from first to second and second to third


clutch may be worn,may need replacing ,but first check system for fluid leak, cneck fluid level and condition, if black in colour then you have worn seals, you can replace seals but i recomend replacing components with new ones becouse the bore of master and slave cylinder can also wear causing seals to leak, note: when servicing clutch system you change clutch and preasure plate and fly wheel if out of spect.

Oct 07, 2009 | 2000 Nissan Frontier

1 Answer

Clutch kit for a 99 rodeo 5 speed 3.2 v-6


replace the complete clutch assembly which includes the disk, pressure plate and the release bearings, some of them also have a polot bearing / bushing, replace it while you are at it make sure that the fly wheel is nto overheated or scored if it is replace the fly wheel or atleast machine the fly wheel in a machine shop, and replace the rear main engine oil seal. when every thing is out and dont forget to rate me please

Dec 04, 2008 | 1999 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...