Question about 2001 Honda Odyssey

1 Answer

I have a honda odyssey with the code po780, when I reset the code at a full stop in gear and take off it rides fine until it has to change to second gear. When this happens it shifts with a violent clunk and the code reappears when I come to a complete stop and accelerate it's still stuck in second gear. could this be a possible solenoid problem and nothing else and which one could it be?.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 226 Answers

Im no expert on trannies but it sounds like synchros. That code is shift malfunction, which im sure you already know. Id also check the shift cable.

Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset a3 light on 06 Honda odyssey?


Reset the Oil Maintenance Light on a 2005-2015 Honda Odyssey:
  1. Turn the ignition to position "On" without starting the engine.
  2. Press the Select/Reset button until it displays the "oil life percentage"
  3. Then, press and hold the knob until the oil life percentage begins to blink.
  4. Release the knob.

Aug 29, 2016 | 2006 Honda Odyssey

1 Answer

Where is the reset button located in a 2003 Honda Odyssey for the anti theft?


If the remote was programmed before loss of power, push and hold the unlock button until the alarm stops. If not try locking and unlocking the drivers side door with the the key. This has reset the alarm on my 2001 Odyssey.

You will also need the unlock code to reactivate your stereo after long term power loss. It is on a card with the manual given to the owner of new vehicles. A smart dealer will put it on a sticker in the glove box. Otherwise you have to remove the radio and give a Honda dealer the radio serial number to get the unlock code. Don't try it randomly; 10 incorrect tries locks the stereo.

Mar 07, 2015 | 2003 Honda Odyssey

1 Answer

I recently got my (Honda Odyssey 2006) oil changed by a non Honda tech and now i need the service maintainence signal -code A14 reset so that i can be notified when the next oil change is due.


  • Lets get started. Place the key in the ignition and turn as if to start your minivan - but do not actually start your Odyssey.

  • 2) Locate and click the black odometer button located near the bottom of the instrument panel until "Oil Life" along with a percentage value appears.
  • 3) Release your finger from the button, then press and hold the button for ten (10) seconds.
  • 4) Once again, release your finger from the button, then press and hold the button for five (5) more seconds. Lets count: one Mississippi, two Mississippi, etc. all the way to five.
  • 5) Your Honda Odyssey's display panel should read "Oil Life 100%." You are done!



  • Read more: How to reset the oil life indicator light on a 2005 Honda Odyssey ' eHow.com http://www.ehow.com/how_5297874_reset-light-2005-honda-odyssey.html#ixzz1C47PKfr7

    Jan 25, 2011 | 2005 Honda Odyssey

    1 Answer

    I used the wrong Honda key in my 07 Odyssey. The ignition is disabled.How can I fix,


    PUT THE RIGHT KEY IN THE IGNITION SWITCH TURN IGNITION SWITCH TO ON POSITION UNTIL IMMOBILIZER WARNING LAMP ILLUMINATES FOR FEW SECONDS.KEY HAS RESET.IF IMMOBILIZER WARNING LAMP FLASHES RAPIDLY KEY DID NOT RESET.TRY TURN SWITCH ON WITH KEY UNTIL IMMOBILIZER LIGHT ILLUMINATES FEW SECONDS TURN OFF YOU READY TO GO GO GO.IF CANT RESET HONDA DEALERSHIP HAS TO USE DIAGNOSTIC EQUIPMENT TO RESET KEYS TO IMMOBILIZER MODULE.

    Nov 07, 2010 | 2007 Honda Odyssey

    2 Answers

    I changed out the battery recently on my 01 Honda Odyssey. I need a reset code for my stereo. Where can I find this?


    at the Honda dealer, if u are the orignial owner then it was given to u with the paper work when u took delivery of the car.

    May 11, 2010 | 2001 Honda Odyssey

    1 Answer

    Resetting radio code


    You need to be very careful Each failed attempt causes a long delay before you can enter it again. Follow the instructions exactly. You may need to use the car for a day or more before attempting it again if you failed too many times. The radio should say CODE not ERROR. Error means no code can be entered now. You must wait until the radio displays CODE.

    Feb 07, 2010 | 2002 Honda Odyssey

    4 Answers

    P0740 code on 2000 Honda Odyssey


    Code p0740 is a problem in lock up control solenoid assembly, Check whether scan tool indicates another code. Does the scan tool indicate another code? YES - Perform the Troubleshooting Flowchart for the indicated Code(s). Do not continue with this troubleshooting until the causes of any other DTCs have been corrected. Measure the line pressure. Is the line pressure within the service limit? Repair the hydraulic system as necessary. Replace the Lock-up Control Solenoid Assembly set lock-up control solenoid valve/shift control solenoid valve A assembly and the A/T clutch pressure control solenoid valve A/B assembly. Turn the ignition switch OFF, and reset the PCM memory by removing the BACK UP fuse in the passenger's under-dash fuse/relay box for more than 10 seconds . Using the scan tool, check to be sure that the engine coolant temperature is 176°F (80°C) or above . Drive the vehicle at 55 mph (88 km/h) for more than one minute . Recheck for code P0740. Does the OBD II scan tool indicate code P0740? YES - Remove the torque converter and inspect for a missing torque converter O-ring. If the O-ring is damaged or missing, replace the transmission and torque converter. NO - The system is OK at this time.

    Jun 11, 2009 | 1999 Honda Odyssey

    1 Answer

    I changed my oil on my LX and the change oil warning is not reset


    RESETTING THE ENGINE OIL LIFE INDICATOR
    On LX and EX models

    If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

    1. Turn the ignition switch to ON ( II ).

    2. Press the SELECT/RESET knob until the engine oil life indicator
    is displayed.

    3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

    4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

    Jan 01, 2009 | 2004 Honda Odyssey

    1 Answer

    2005 honda odyssey ~ cannot remember how to reset the oil change


    hold in the trip meter button on the dash before you turn on the key... keep the button pushed in, turn the key on, and wait until the light goes out( 10 sec or so)

    Dec 18, 2008 | 2005 Honda Odyssey

    Not finding what you are looking for?
    2001 Honda Odyssey Logo

    721 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    75797 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8140 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...