Question about 2003 Isuzu Ascender

1 Answer

I have an intermittent no crank problem with my 2003 isuzu ascender. Most of the time the car starts fine. However, sometimes when I turn the ignition to start, i get a single click sound but no engine crank. However, i have electrical power to the dashboard and all accessories. Usually, the engine will start after a two or three attempts. However, I have had to try 20+ times on a few occassions.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Isuzu Master
  • 8,180 Answers

Hi, this symptom is often caused by a dead spot on the starter commutator. It can also be caused by burned solenoid contacts. If smacking the starter with a hammer gets it turning, the problem is the former. If not, it's the latter. I recommend you remove the starter and have it tested at your local parts store. Make sure they test it several times to see if there's a dead spot. Please let me know if you have questions, and thanks for using FixYa.

Posted on May 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does 2003 isuzu ascender rims fit on a 2004 isuzu ascender?


how to set gear timing 4hf1 20004 Isuzu truck

Sep 07, 2013 | Cars & Trucks

1 Answer

Clutch fan replacement 2003 Isuzu ascender


Thread on type. Loosen fan clutch counter-clockwise for removal. Requires 36mm wrench (or adjustable crescent wrench).

Dec 23, 2012 | 2003 Isuzu Ascender

1 Answer

Pcm and flashing for 2006 isuzu ascender. error code P0601 pcm/tcm memory error. vehicle is no crank no start


ok this is the second one today , internal controler failure
bttter knowen as (internal control module fault condition detected, (
check s u m )

Sep 29, 2012 | 2006 Isuzu Ascender

1 Answer

Wipers won't turn off 2005 ascender


more than likely, its your wiper motor that is bad.

Feb 08, 2010 | 2005 Isuzu Ascender

1 Answer

My 2003 isuzu ascender won't start, when you crack


or you have a broken ground wire, an for shifting it mite nutaral safty switch.

Jan 31, 2010 | 2004 Isuzu Ascender

1 Answer

2001 isuzu rodeo has intermittent starting problems


check battery cables & terminals for tightness & corrosion.also check at starter.check starter bolts & actual starter for looseness.if no problems found your starter may be on its way out.next time it happens hit starter with hammer or heavy object if it starts right up get ready to replace it.good luck

May 20, 2009 | 1999 Isuzu Rodeo

1 Answer

Humming noise 2005 Isuzu Ascender


2005 impala trans hits hard after a while or driving faster speeds i turn off the engine for a few minutes restart engine and he changes fine

May 11, 2009 | 2005 Isuzu Ascender

Not finding what you are looking for?
2003 Isuzu Ascender Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...