Question about 1989 Cadillac Sedan DeVille

1 Answer

Cooling fans not working causing the car to overheat. cooling fan motors checked, and are working when hot-wired but do not workwhen car is tested. Thermostat been replaced. Suspect wireing problem or fuse link. Please give me the schematics for the cooling motor. Thank you.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 752 Answers

Not your problem. Check your temp sending unit or the one that is attached to that fan.

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My car is overheating because the fan is not working. Do I need to replace the fan, change the coolant fuse, or run a wire so that my fan can come on?


Give the fan a direct 12v and ground with jumper wires. If it works prob just a relay if not prob needs a fan.

Mar 08, 2015 | 2001 Chevrolet Cavalier

2 Answers

What cause of overheat from engine


an engine will overheat if the rad cooling fan is not working, this will have to be check to see if its the fan motor, the fan relay. low coolant level, top up coolant check for leaks. could be head gasket problem, bad water pump(impeller worn).

Aug 08, 2014 | Daihatsu Charade Cars & Trucks

2 Answers

Engine fan not working


Could be low on coolant, the cooling fan motor, a relay, or the fuse among other things.
A mechanic would check for power at the fan motor after checking the fuse.
Is the check engine light on ?

Jul 05, 2012 | 2006 Jeep Commander

1 Answer

Overheating my car continuously overheat


CHECK FOR LOW COOLANT LEVEL AND REPLACE THERMOSTAT AND THE RADIATOR PRESSURE CAP.IF CAR OVERHEATING AND COOLING FAN NOT WORKING.CHECK COOLANT FAN FUSE AND RELAY.IF BOTH OKAY,HOT WIRE COOLANT FAN,IF FAN WORKS, PROBLEM COULD BE FAULTY COOLANT TEMPERATURE SENSOR,OR FAULTY PCM, IF COOLING FAN DONT WORK WHEN YOU HOT WIRE FAN.THE COOLING FAN ASSEMBLY NEED REPLACING.

Apr 22, 2011 | 1993 Lexus Es 300

1 Answer

I have a 1994 chevy cavalier 2.2L engine. the engine fan does not turn on causing the car to over heat. What makes the fan turn on, is it a thermostat or a fuse?


REPLACE THERMOSTAT BUT IT SOUND LIKE FAULTY COOLANT TEMPERATURE SENSOR.BUT CHECK COOLING FAN FUSE AND RELAY.IF ALL IS GOOD HOT WIRE COOLING FAN IF COOLING FAN WORKS.PROBLEM COULD BE FAULTY COOLANT TEMPERATURE SENSOR. DAMAGE FAN WIRING OR FAULTY PCM.IF COOLING FAN DONT RUN WHEN HOT WIRED.REPLACE FAN AND MOTOR.

Feb 20, 2011 | 1994 Chevrolet Cavalier

2 Answers

My radiator fan does not kick on. First, I tested the fan when I pulled it out of the car and it works, second I replaced the coolant temperature sensor and the engine temperature switch, lastly I...


Check the fan motor and fan connection to the motor.If that connection is getting short or loose then fan will not kick ON. Check the motor terminal voltage.It should show exact 12 volt.If less then motor is faulty. First, check for 12-volts to the fan motor when the air-conditioning is on. Also, check the wiring for damage and poor ground connections. The fan is controlled by an integrated controller. You may need a cooling fan motor. If the cooling fan motor is starting to fail, it will pull extra AMPS through the relay causing it to fail prematurely.also check for a faulty radiator cap.If the cap is loose or loosing pressure then then will stop the fan to start. If all checked ok then yes its faulty ecu or ecm:-- Check electrical continuity between the relay and the engine control unit. Connect the red plug at the relay and the other plug at the ECU. If you aren't getting continuity, fix the wiring between the ECU and the relay. If there is continuity, continue to the next step. The ECU is most likely the culprit if you have got to this step. Try replacing with another and fan will work. Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Jul 27, 2010 | 1992 Pontiac Sunbird

5 Answers

Car will overheat while at idle


yes the head gaskets leaking on modern aluminum head engines is all to common. never overheat them, if they start to get hot shut it down and find out why, it can of course be the fans and plugged radiators or faulty thermostats but sounds like in your case the head gasket is leaking and combustion gas is entering the cooling system and this causes an overheat

Jun 08, 2010 | 2002 Mitsubishi Galant

2 Answers

It has an overheating problem. I changed the


SOUND LIKE COOLING FANS NOT RUNNING CHECK AND SEE DOES COOLING FANS TURN ON WHEN ENGINE OVERHEATS IF NOT CHECK COOLING FANS FUSE AND RELAY IF BOTH CHECKS OUT GOOD HOT WIRE COOLING FAN.IF IT WORKS.PROBLEM COULD BE COOLANT TEMPERATURE SENSOR- PCM- AND OPEN OR SHORT IN WIRES.IF COOLING FAN DONT WORK WHEN YOU HOT WIRE IT PROBLEMS THE FAN MOTOR.

May 27, 2010 | 2001 Chevrolet Malibu

3 Answers

I have 2003 grand cherokee with 140000 miles that overheats at idle. as soon as i start moving again, the temp goes back to normal.


You have two fan's on your truck, 1 is a fan clutch runs with the drive belt, 2 elec fan motor, with test light and engine running at normal temp, just a little bit above 1/2 way on your temp gauge check voltage at elec. cooling fan harness if you have voltage at one of the two wire's and fan don't turn on, bad cooling fan motor, on the fan clutch after you check voltage at elec. fan motor turn engine off, with your hand spin drive belt fan if it spin's freely bad fan clutch, replace it.Also check cooling level.Hope this was very helpful

Jan 21, 2010 | 2006 Jeep Commander

1 Answer

Electric cooling fan


check wiring to fan for 12 volts. check wiring and see if there is a relay that can be replaced or tested. If the relay is good, and wiring has 12 volts, then either the temp sensor or fan motor brushes are shot.

Aug 30, 2009 | 1996 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...