Question about 1995 Buick Regal

2 Answers

No power to my fuel pump! Any suggestions on what I need to fix?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 1,975 Answers

I would start if you haven't already by checking a fuse and a relay. The fuse that you need to check is in the fuse box located on the passenger side of the vehicle in the engine compartment. I gave you a picture of the layout of the fuses and relays below. The fuse you want to check is the one marked "ECM BAT" which controls power to the powertrain control module which tells the fuel pump/relay to work. and then check the fuel pump relay itself which is in the same fuse panel and will be the relay in the number 14 position. Other then that you are most likely looking at a wiring problem which is in a whole other ball park. Start here. I hope this helps you and is the problem. Good luck.


No power to my fuel pump! Any suggestions on what - clifford224_525.gif

Posted on May 18, 2011

  • stefan mohler May 19, 2011

    Oh sweet, I checked the fuel pump relay and it's good, but I did not check the ECM, I'll give it a try.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 448 Answers

Check under the hood for the fuse box
in there you will find the fuse and fuel pump switch
the lid will tell you witch one it is and what size
fuse needs to be there


hope this helps you
bob

Posted on May 18, 2011

  • stefan mohler May 19, 2011

    Thanks, but I forgot to add that I checked the fuses and relays and they all have spark. Is there a possibility it could be the crank shaft sensor?

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: Fixing fuel pump

Why not just rplace the relay, or the wires to the relay?

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you fix fuel problems with Chevy S10 2.2 4cyl?


Do you have good power & ground at the pump? if so put a new pump in it. Why would you replace a Used pump with a Used pump.

Oct 01, 2014 | Cars & Trucks

1 Answer

1999 lincon town car no power to fuel injectors


My suggestion would be is to have your "fuel pump" checked. With the gas deposits etc, it can clog it up, or make the float stay stuck closed.

Apr 19, 2014 | 1999 Lincoln Town Car

1 Answer

Sudden power loss, replaced fuel pump and problem still not fixed


possibly it's your fuel injectors first check your fuel filter then fuel pressure and volume. Just a suggestion disconnect you battery and reconnect it is like hard booting you PC at home, might just reset your cars problem.

Dec 17, 2011 | Kia Cars & Trucks

1 Answer

Replaced fuel pump on 96 legacy wagon. will not start now, it does start if hot wired directly to pump. Any suggestions? Have also replaced the fuel pump relay.


Hi yes had same problem it was the plug that sits under the rear seat that supplys power to the fuel pump it had got hot and was charred inside, just cut it out and soldered wires together and fixed prob hope it helps

Apr 01, 2011 | 1996 Subaru Legacy

1 Answer

I have a 98 chevy s10 blazer 2wd 4 door nad my fuel gauge dont work its stuck on empty i changed the fuel pump several time thinkn it would fix the problem but i didnt. i need a picture or sumthing to show...


You could try changeing the fuel pump relay The fuel gauge signal come from the pump and goes through the relay to the gauge and on your vehicle the pump will still work even if the relay is bad it has a back up power system through the oil pressure sending unit . The relay is located inside of the glove box behind a panal its the one on the far left. I also have wiring schematic of the system but would need to fax it . If you want it get back to me with a fax #

Mar 05, 2011 | 1999 Chevrolet Blazer

2 Answers

No power to fuel pump to make it work in gas tank


Have you checked the fuse/relay or the reset button (if equipped)?

Mar 03, 2011 | 1987 Nissan Pickup

1 Answer

Fixing fuel pump


Why not just rplace the relay, or the wires to the relay?

Jul 04, 2009 | 1991 Buick Reatta

4 Answers

My fuel pump has no power on a 1998 lincoln continental.


check the power distribution center ,,, also check the key to make sure the chip is still in it

Nov 12, 2008 | 1999 Lincoln Town Car

Not finding what you are looking for?
1995 Buick Regal Logo

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...