Question about Hyundai Santa Fe
I would take it back and tell them they need to fix it. it sounds like a wire for the lock/unlock may of fallen off or there is a problem with the remote stare module. wires tend to fall off if all the used were crimp connectors and didn't solder the wires together.
Posted on Jun 01, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The filter sits on top of the transmission. look under the hood on drivers side it screws right on top of the transmission. It looks like an engine oil filter.
Posted on Mar 08, 2009
hello ,If its the rear hach handle you are talking it is due to rust build up on the spring behind the handle. The only way to fix is to get a new handle it will come with the spring and all. Make sure if you do get this handle and you get it painted to match your paint that the body shop does not take it apart to paint cause it is really hard to get the spring back in and thay may brake it on you.
Posted on Mar 28, 2009
fuel pumps are kindda expensive, especially on import vehicles. Number one cause for fuel pump failures is heat. When your rinding with the fuel below half, the pump is party exposed inside the fuel tank and when exposed for periods of time it tends to heat up and then gradually burns out cause you to replace it. It's ok to go below half but not to often, I hope it helped abit.
Posted on Aug 18, 2009
its pretty simple...
1) let engine cool down all the way
2) pull plug wires off plugs one at a time.
3) remove plugs with proper spark plug socket.
4) replace plug
5) replace wire
6) move to next one.
Posted on Nov 13, 2009
You need to check the pulse coming from the crank sensor preferably using an osiliscope.
The sensor may have been damaged when re-installing the transmission.
Posted on Nov 19, 2009
Tips for a great answer:
Sep 23, 2015 | 2003 Hyundai Santa Fe
Jan 05, 2015 | 2003 Hyundai Santa Fe
Mar 28, 2014 | 2007 Hyundai Santa Fe Limited
Nov 29, 2013 | 2007 Hyundai Santa Fe
Feb 02, 2013 | 2007 Hyundai Santa Fe Limited
Sep 27, 2012 | 2007 Hyundai Santa Fe Limited
Apr 22, 2010 | 2001 Hyundai Santa Fe
Oct 08, 2009 | 2002 Hyundai Santa Fe
Jun 14, 2008 | 2001 Hyundai Santa Fe
54 people viewed this question
Usually answered in minutes!