Question about 2003 Ford Crown Victoria

1 Answer

2003 cvpi wing mirror

Hi all,

I'm in the UK so parts and books for a Crown Vic are hard to come by, there must be at most 200-300 Crown Vics in the whole of the country. I have recently had my drivers side mirror "removed" by some helpful kids and I obviously want to put it back on. Anyone here have a wiring diagram for the electric motor inside the mirror housing? I simply cannot find anything in the UK that is of any use.

Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

First of all if you have the new mirror off of a crown vic or grand marquise there is nothing to worry about wiring because you have to take the door panel off and once off all you have to do is plug in the new mirror the same way you took the old one off

Posted on Jan 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 cvpi remote heated mirrors do not work. Fuse #10 checks good by sight.


You Have to Check the Resistance @ the Connector for the Mirror, If there is No Res then the Heater has to be replaced

May 04, 2014 | 2004 Ford Crown Victoria

1 Answer

Modifying a 96 Crown Vic


Explain what CVPI stands for a start.

Jul 16, 2013 | 1996 Ford Crown Victoria

1 Answer

I have a 99 crown vic and can't seem to find the


The car is designed not to spin it's wheels when taking off. If you want to make it do that you need to either change the powertrain programming or replace some powertrain parts.

May 07, 2012 | 1999 Ford Crown Victoria

1 Answer

Why would the cooling fan not be working in a 2005 crown vic CVPI


Does it work when you turn the A/C on? The fan always kicks on with the A/C, if it doesn't look for a blown fuse. Or possibly a fan motor burnt up. If it works with the A/C but doesn't when the engine is too warm, it is probably the temperature sensor.

Feb 09, 2012 | 2005 Ford Crown Victoria

1 Answer

2003 CROWN VIC HAS NO SPARK AND NO POWER TO FUEL PUMP CHECKED RELAYS AND FUSES CHANGED CRANK AND CAM SESOR LOOKED FOR BAD GROUND AND BROKEN WIRES AND HELP PLEASE


DID YOU CHECK THE FUEL PUMP SHUTOFF SAFETY SWITCH ON THE LH/DRIVERS SIDE IN THE TRUNK & MAKE SURE IT IS DOWN ,& EVEN IF IT IS SOMETIMES YOU CAN TAKE SOMETHING & PUSH IT UP & THEN PUSH IT BACK DOWN & IT WILL CRANK,& BELOW THAT SWITCH IN THE TRUNK IS A FUEL PUMP DRIVER MODULE ,IT MAY BE BAD,THOSE ARE A COUPLE OF THINGS THAT HAVE WORKED FOR ME ,& THATS PRETTY MUCH ALL I DO IS WORK ON FORDS, & LX CROWN VICS & P71 POLICE CROWN VICS WHERE I AM WORKING, HOPE THAT IT MIGHT HELP YOU FIX IT. SEAN

Nov 02, 2009 | 2003 Ford Crown Victoria

1 Answer

2004 Crown Vic w/ auto climate control blows only out defrost and floor vents reguardless of setting, how can I get a schematic for the blower doors and such, to trouble shoot?


those control units in the crown vics **** out all of the time. they're not cheap from the dealer, try auto parts stores for aftermarket or junk yards.
one trick we did with cabs was to pull the unit out and splice the black and blue vacuum lines together. that's great for summer, but you have only vent then.

Oct 02, 2009 | 2004 Ford Crown Victoria

2 Answers

CVPI fresh out of the auction. High beams don't


Prior to 2003 CVPI, check for a cut green/white wire running to both lights..

2003 + Check the wig-wag connector in front of the grill to make sure the clip is connected so it allows normal operation

Jul 23, 2009 | 1999 Ford Crown Victoria

3 Answers

Does the crown vic police intercepter take as much oil as the regular crown vic? (when changing the oil and filter)


I ~think~ the 1999 is the same as the 2000 (mine is a 2000 P71)

The 2000 CVPI (Crown Vic Police Interceptor) owners manual recommends the following:

Engine Oil - Motorcraft SAE 5W-30 Super Premium Motor Oil 5.0 quarts

Transmission Fluid - Motorcraft Mercon V ATF 13.9 quarts (fluids Mercon & Mercon V are NOT INTERCHANGEABLE, DO NOT MIX)

Fuel Tank - 19.0 gallons

Break Fluid - DOT 3


Rear Axle Lubricant - Motorcraft 80W-90 Premium Rear Axle Lubricant 3.75 pints (add 4 oz of Additive Friction Modifier C8AZ-19B546-A or equilavent meeting Ford Spec. EST-M2C118-A for complete refill of Traction-Lok Rear Axles)

Engine Data - 4.6L V8 Engine
Cubic Inches - 281
Required Fuel - 87 Octane
Firing Order - 1-3-7-2-6-5-4-8
Spark Plug Gap - 1.3-1.4 mm (0.052-0.056 inch)
Ignition System - Coil On Plug
Compression Ratio - 10.0:1

I hope this helps!

Jun 27, 2009 | 1999 Ford Crown Victoria

1 Answer

Where is the fuse box for the air/heat of a 2001 crown vic Lx. My heat norair wont come on even when it says it is on its not.


There are actually two fuse boxes, at least on my 01 Vic CVPI. The primary one is under the dash on the driver's side and to the left of the steering column. the second one is under the hood near the battery. Your owner's manual should have a diagram as what fuses control your car's accessories. Hope this helped! Bill

Jan 03, 2009 | 2001 Ford Crown Victoria

1 Answer

2003 ford crown vic hard steering


i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras

Sep 10, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...