Question about 2007 GMC Yukon Denali

1 Answer

My park assit is on and the sensor are not working for backing up can they have dirt in them

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 339 Answers

{: ) The PARK ASSIST OFF message will be displayed when the parking assist system is disabled due to conditions that disable or inhibit the system. The object alarm module requests the DIC display PARK ASSIST OFF when it detects one of the following conditions:
• The parking assist system is manually disabled using the driver information center (DIC). • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, trailer hitch receiver, or tow bar. • The object alarm sensors are covered by snow, mud, dirt, slush, or ice. • The vehicle bumper is damaged. • Excessive paint thickness on a replacement object alarm sensor. • The object alarm sensors are disrupted by vibrations, like those caused by a large nearby vehicle or from heavy equipment such as a jackhammer.

The SERVICE PARK ASSIST message will be displayed when the object alarm module detects a malfunction in the parking assist system and the system is disabled. It could be one of your sensors is at fault or even the module.

Posted on Jun 16, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the service park assit have any thing to do with the transmission


http://m.jeep.com/en/2014/cherokee/safety_and_security/

the CEL on means its a problem
scan it, all cars, scan it and get the DTCS.
then look them up on the FSM an see what to do.
all cars made, from 1988 to now,

Sep 23, 2014 | 2006 Jeep Commander

1 Answer

ABS/Parking Brake?Service Engine Lights are on But Runs Great


Does ABS work properly? Get on dirt road and try to lock brakes (do this carefully insuring no police car tailgating,lol) Could be bad wheel speed sensor. Check codes with scan tool capable of reading ABS and trans codes.

Feb 22, 2014 | 2001 Chevrolet Blazer

1 Answer

When parking my 2006 chevy equinox my power steering locks


have someone check the power steering pump, if it's electric motor behing steering wheel then It can either be the assit motor or majorly the sensor, sensors anoy many people these days.. try it.

Sep 30, 2013 | 2006 Chevrolet Equinox LT

1 Answer

Radio and rear parking assit lights go out then come back on when ever they feel like it. engine dont stop but radio followed by park assit lights come on and off.Chrysler garage s g miths sydenham kent...


I have excactly the same problem. Please let me know what the problem was if iit's solved. I will let you know whenever I find out what it is.
300c CRD 2006
transam1968@gmail.com

Patrick

Jan 16, 2011 | 2005 Chrysler 300

2 Answers

2001 chevy venture Rear Parking Assist not working


Normally it will not work when the brakes are worn out so an inspection is needed to determine this is your problem

Jun 19, 2010 | 2001 Chevrolet Venture

1 Answer

Parking assist not working nor backup cam


check fuse, relay,and switch if u have a hitch hooked up or something blocking sensors in bumper remove or clear obstruction also extreme dusty or dirt build up can cause problem

Oct 27, 2009 | 2007 GMC Yukon XL Denali

1 Answer

Key wont come out of ignition


Use a DRY SILICON lube and spray a little bit into the keyhole and immediately work your key a few times to spread the lube. The shift lever either has a button or it has to be pulled to the side. Again, lube the moving parts and work them around.
Don't use WD-40. It is a wet lube and it will attract dirt and gum up the works.

Aug 07, 2009 | 2005 Pontiac G6

2 Answers

Porsche cayenne 2005 - inoperable parking sensors and mirrors


did you ever solve this problem, have the same issue myself :-(

Jun 09, 2009 | 2005 Porsche Cayenne

2 Answers

2002 Yukon XL Denali Problem: When idling, goes below 500 RPMs, spits and sputters at idle. No check engine light, spark plugs are one year old. Could it be a sensor??


Most sensors will trigger the check engine light, however the TPS(throttle position sensor) or EGR Valve(exhuast gas recirculation valve) could be potential causes. Does this problem only occur at idle? Is the idle normal in park? Let me know and I can try to assit further.

Hope this helps

Jun 27, 2008 | 2002 GMC Yukon XL

Not finding what you are looking for?
2007 GMC Yukon Denali Logo

2,646 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...