Question about 1987 Dodge Ram 50

1 Answer

Transmission fill, how do you fill - 1987 Dodge Ram 50

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 6,982 Answers

If adding from empty, (just installed new or used unit) put at least four or five quarts in (through dipstick tube). Then, start the engine, leave it in park on a level surface and continue filling 'till it reads full on the dipstick. After it's full put the rear on jackstands and run it in drive and let it shift gears, idle down and shut it off. Don't attempt to put it into park 'till the rear wheels stop turning. Then put it on the ground and re-check level.
If adding to a low unit or after a filter change, just fill on a level surface running till it reads full. In either case, when finished, drive it and when you return re-check level. Always check for leaks.

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How quarts of Trans Fluid will fill the transmission???


Chevvy Malibu

CAPACITIES: Engine, with filter..........5 quarts [1]
Cooling System, Initial Fill..........7.5 quarts
Passenger Car & Light Truck Antifreeze & Coolant
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, 6T40 Initial Fill..........6.3 quarts
Automatic Transmission, 6T70 Initial Fill..........6.3 quarts
Automatic Transmission, Total Fill
6 speed 6T40..........9 quarts
6 speed 6T70..........9.5 quarts
[1] After refill check oil level.

May 04, 2016 | Cars & Trucks

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

Oil capacity on a 1991 geo storm


1991 GEO STORM 1.6L 4-cyl Engine Code 5 DOHCCAPACITIES
Engine, with filter.......... 3.2 quarts
Cooling System, W/ MT Initial Fill.......... 7.4 quarts
Cooling System, W/ AT Initial Fill.......... 8.0 quarts
Automatic Transmission, Initial Fill........ 4.3 quarts [1]
Automatic Transmission, Total Fill......... 7.0 quarts
Manual Transmission, ..........4.0 pints[1] With ENG at operating temperature, shift through all gears.
Check fluid level in PARK and add fluid as needed.1991 GEO STORM 1.6L 4-cyl Engine Code 6 SOHC
1992 GEO STORM 1.8L 4-cyl Engine Code 8 DOHCCAPACITIES
Engine, with filter.......... 4.0 quarts
Cooling System, W/ AT Initial Fill.......... 8.0 quarts
Cooling System, W MT Initial Fill........... 7.4 quarts
Automatic Transmission, Initial Fill........ 4.3 quarts [1]
Automatic Transmission, Total Fill......... 7.0 quarts
Manual Transmission, .......... 4.0 pints[1] With ENG at operating temperature, shift through all gears.
Check fluid level in PARK and add fluid as needed.

Sep 12, 2012 | 1991 Geo Storm

2 Answers

Where is the location on a 1994 honda civic ex that i would fill the manual transmission with gear oil?


Hello,
Manual transmissions have a fill plug and a drain plug on the side of the transmission. The fill plug is a little above the drain plug. Pull the fill plug and fill the transmission until the transmission fluid just barely seeps out and re-plug the transmission. That is the proper way to fill it. You will need a long stem funnel to give you the room you need to fill it. Your transmission requires a 10W30 weight motor oil, just like your engine. If you have a little time and 3 or 4 quarts of oil laying around you can pull the fill plug first and THEN the drain plug and let all the oil drain out. Then plug the transmission and re-fill it with fresh oil and this is a transmission flush for your transmission. You just saved $70 shop charge doing this. I say pull the fill plug first and THEN the drain plug because the last thing you want to do is pull the drain plug first and then find out the fill plug has welded itself and won't come out and now you can't fill the transmission. Fill plug first always.
Regards, Tony

Apr 17, 2011 | 1994 Honda Civic

2 Answers

Need to know how much transmission fluid to add if empty


Automatic Transmission, E4OD Initial Fill..........6.5 quarts
Automatic Transmission, C6 Initial Fill..........6 quarts
Automatic Transmission, 4R70W Initial Fill..........5 quarts
Automatic Transmission, 4R75W Initial Fill..........5 quarts
Automatic Transmission, Total Fill
4 speed E4OD..........15.7 quarts
4 speed 4R70W..........14 quarts
3 speed C6..........12.1 quarts
4 speed 4R75W..........14 quarts

E 150 5.0L engine

Feb 22, 2011 | 1996 Ford Econoline

1 Answer

How much transmission fluid is in a 1999 jeep wrangler


Automatic Transmission, 32RH Initial Fill..........4.1 quarts
Automatic Transmission, 30RH Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
3 speed 32RH..........8.6 quarts
3 speed 30RH..........7 quarts
Manual Transmission, AX-5 2WD..........7.4 pints
Manual Transmission, AX-15 2WD..........6.8 pints
Manual Transmission, AX-15 4WD..........6.8 pints

Feb 14, 2011 | 1999 Jeep Wrangler

1 Answer

How much oil does my 2001 silverado k3500 with 8.1 L gas engine hold?


All TEMPS......5W-30
Engine, with filter..........6.5 quarts [1]
Cooling System, AT Initial Fill..........20.8 quarts

Cooling System, MT Initial Fill..........21.2 quarts

Automatic Transmission, 1000 Initial Fill..........7.4 quarts [2]
Automatic Transmission, 4L80-E Initial Fill..........7.8 quarts
Automatic Transmission, Total Fill
4 speed 4L80-E..........13.6 quarts
5 speed 1000..........12.7 quarts
Manual Transmission, NV4500 (TOPC)..........7.9 pints
Manual Transmission, ZF S6-650..........12.7 pints

Feb 03, 2011 | 2001 Chevrolet Silverado 3500

1 Answer

Transmission filter rplacement how much fluid?


Automatic Transmission, 46RH Initial Fill..........4.1 quarts
Automatic Transmission, 44RE Initial Fill..........4.1 quarts
Automatic Transmission, 42RE Initial Fill..........4.1 quarts
Automatic Transmission, Total Fill
4 speed 44RE..........11 quarts
4 speed 46RH..........14.4 quarts
4 speed 42RE..........11 quarts

Jan 29, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Oil spec


1995 HONDA ACCORD 2.7L 6-cyl Engine Code C27A4 C27A1

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,MPZA......AF2

CAPACITIES:
Engine, with filter..........4.4 liters
Automatic Transmission, MPZA Initial Fill..........2.7 liters
Automatic Transmission, Total Fill
4 speed MPZA..........6 liters
Manual Transmission, ..........1.9 liters

1995 HONDA ACCORD 2.2L 4-cyl Engine Code F22B1 VTEC

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,A0YA......AF2

CAPACITIES:
Engine, with filter..........4.3 liters
Automatic Transmission, A0YA Initial Fill..........2.4 liters
Automatic Transmission, MP0A Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A0YA..........6 liters
4 speed MP0A..........6 liters
Manual Transmission, ..........1.9 liters

Jan 07, 2010 | 1995 Honda Accord

2 Answers

How many quarts of transmission fluid does it hold


You didn't state what size engine you have.
The 2.2 engine----- 6.9 qts.
The 2.3 engine-----7.4 qts.
The 2.4 is 7.4 qts.
The 3.1 is 7.4 qts.
The 3.4 is 6.9 qts.
These are the capacities for refilling after being drained.

Nov 17, 2009 | 2001 Pontiac Grand Am SE

Not finding what you are looking for?
Cars & Trucks Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...