Question about Hyundai Sonata

2 Answers

My car makes a clicking noise when I am turning the wheel. Is this my axel? And if so does that cost a lot to fix or can my neighborhood repair man be able to help?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 273 Answers

It is your cv axle on your front end. And yes. He should be able to fix it. If not, then he needs a new job. haha. But, it should not cost you anymore than about 60 dollars for the part, and about 60-100 for his work, OR whatevr his rate is. But, i wouldnt pay no more than a 100 for the work. Hope this helps, James Booth :) PLEASE RATE THIS!!!

Posted on May 18, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 75,005 Answers

This type of noise is cause by the front axles (right or left or both) outer CV joint either having a torn grease boot and running without lubrication or being worn out or both. If this has gone on for more than a few weeks the CV joint is ruined.

Posted on May 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 volvo 850 sw makes a clicking noise when turning left


sounds like the cv boot on the axle is shot...dont waste money on trying to replace the boot u can get a rebuilt axel for about the same price without the headache

Aug 22, 2012 | 1996 Volvo 850

2 Answers

2004 ford freestar - when i back up and the wheels are turned (but not cranked) i hear a clicking noise. no noise when i'm turning in drive - only reverse


check the brakes and the cv axles. My thinking is cv axles if the vehicle has around
100 thousand miles on it. Hope this is helpful.

Jun 24, 2011 | Ford Freestar Cars & Trucks

1 Answer

Transfer case still sending power to front wheels on 2000 excursion. HELP! I hear the "clunk" when its put into four high and low and when its disengaged, hubs will not turn at all, I try to turn...


It sounds like a problem with the drive shaft knuckle its a sealer unit and not serviceable See if when you turn the axle back and forth you hear or feel clunking noise or feel movement in the sealed joint Iwould check the conduition of wheel bearings this kind of a problem tends to create a lot of heat so a over hall of bolth front wheels mabey brakes and bearings is likely along with any axle problems you find It sounds like you waited to long to address this things like don't braek over night they give waring signs make noises viberate you need to look and listen. repairs tend to be much cheaper and easyer if you do. It still sounds like you can save it but you need to do everything that it needs good luck and sorry its not easy fix but it needs work

Dec 10, 2010 | 2000 Ford Excursion

2 Answers

When I turn corners in my 03 aviator it makes a loud clicking noise rather I turn left or right. What can it be?


axle CV joints. Check 4 boots for tears. Also grab shafts and tug--check for play in joints. Replace axles that have play in CV joints. Let us know if you need instructions.

Oct 06, 2010 | 2005 Lincoln Aviator

1 Answer

Loud ginding or click click noise when i turn my kia wheel to the left or while im reversing


need to get the brakes inspected. while checking tham the cv axels will be in view and with the wheel off the ground the axel can be checked for play.

Oct 03, 2010 | 2005 Kia Sorento

1 Answer

Making clicking noice when i make turns


Clicking noise is likely a c/v joint, to repair you replace the axel shaft. To Isolate the concern see if it happens more when turning right or left, the dominate noise is the failed side

Jun 12, 2010 | 2001 Nissan Maxima

4 Answers

The front driver side tire area makes loud clinking and clunking noises when turning sharply and backing up


Sounds like the CV joint is bad. Take a look under the wheel and see if the rubber boot is torn and grease is coming out. Need to take to a repair shop.

Dec 01, 2009 | 1997 Chevrolet Cavalier

3 Answers

Rotating wheel noise from front end


That is the bearings going bad on it.

May 24, 2009 | 2004 Toyota Sienna

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...