Question about Toyota Tacoma

1 Answer

I have a 1995 2.4 liter toyota tacoma and it has three separate belts that turn alt,a/c, and WATER PUMP. what i need to know is which belt do i buy for the one that hooks to water pump because it has broken and my trucks runing hot

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 466 Answers

Hi you have to analyze because the belt breaks the water pumpcould be a problem with alignment or to install a belt V is notcorrect and very far into the channel that breaks po

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt broke toyota tacoma 1995


Go to You Tube Video & watch or see
all you need on your engine

Jan 18, 2013 | 1995 Toyota Tacoma

1 Answer

I need a belt routing diagram for 2009 Tacoma 4 liter


Timing belt routing diagrams for cars and trucks? Click the link below:--- http://technoanswers.blogspot.com/2011/10/timing-belt-routing-diagrams-for-cars.html

Drive belt routing diagrams for cars and trucks? Click this link below:--- http://technoanswers.blogspot.com/2011/10/drive-belt-routing-diagrams-for-cars.html

Jul 25, 2011 | 2009 Toyota Tacoma

1 Answer

I need a picture of how a serpentine belt goes on. For a 2002 toyota camry 2.4L, 16 valve


i do not have a picture but i can try to explain it to you.it will almost be the shape of an hour glass so here we go. put belt around alt to ps pump backside of belt up around the tensioner then around crank pulley then around ac compressor then the backside of belt up and around water pump.i have found that 2 people is better to do the job because the tensioner is so hard to get to and once you get the belt up to the w-pump i will take it off the alt then put around water pump and hold the belt with one hand and pull the tensioner with the other hand and then slip the belt on the alt. this is a stubborn belt to put on. good luck and i hope this info helped let me know........if i can help in any other way let me know........

Jun 18, 2011 | Toyota Camry Cars & Trucks

1 Answer

How do you change your water pump, what needs to come off during this process


DRAIN WATER FROM RADIATOR, REMOVE WATER PIPES THEN RADIATOR. LOSEN THE ALTERNATOR BELT AND OTHER BELTS AND REMOVE. LOSEN FAN THEN REMOVE AND THEN YOU HAVE ACESS TO THE WATER PUMP.

Dec 13, 2010 | 2003 Toyota Tacoma

1 Answer

How to change belts on a 1995 tacoma?


there is a belt tensioner that should have a bolt you can turn to relieve pressure om the belt they are eithor on the alternator or the power steering pump then be able to replace the belt

Sep 13, 2010 | 1995 Toyota Tacoma

1 Answer

Camry timing belt


Both the 2.2 Liter 4 cylinder and the 3.0 Liter V6 have a cam belt that must be replaced every 60,000 miles. The cam belt also drives the water pump and for this reason I recommend you replace the cam belt at 120,000 miles when you replace the cam belt the second time. Neither engine is an interference engine.

Jun 16, 2010 | 1995 Toyota Camry

1 Answer

How do you remove the timing belt cover on a 1995 VW Golf.


What is needed Tools: 6mm and 8mm allen wrench socket, 5mm allen wrench. 8mm, 13mm, 19mm socket and ratchet. 10mm combination wrench. Long ratchet extensions (at least one 6in, more are helpful). 5inch Wheel puller (for main shaft pulley). (Some models may need a special spanner tool to adjust the timing belt tensioner) Parts: 2 gal of anti-freeze mixed with distilled water. All three V-belts. (Alt, A/C, P/S) $32.95 New water pump top. $91.91 New gasket for WP. $9.13 New timing belt. $26.13.


Procedure:

Remove battery cable (either power (+) or ground (-)) remove alternator remove A/C remove power steering pump .Remove water pump pulleys remove main shaft pulleys remove timing belt covers remove A/C mounting hardware remove timing belt (don't turn any of the wheels its connected to) replace timing belt adjust belt tension remove water pump face put on new gasket and new part.

Leave pulleys off. replace bottom timing belt cover, replace crank shaft pulley, replace steering pump, replace A/C, put small belt on A/C (hang loose) put large belt around A/C, Main and water pump pulley. put middle size belt on Main water pump and power steering pump reattach bolts for the steering pump pulleys put alternator back on adjust all belts. connect battery

Problem areas:
Main pulley: There are 4 6mm hex head bolts. These must be removed. The main 19mm hex head can be used to turn the engine it the timing belt slips and you have to readjust the timing.

Putting on new belts: This can be a real pain if you get VW belts. The adjustments won't give enough to put the belts over the edge so the easy way is to remove the pulley on the water pump. Then its real easy.

Timing: If you turn the wheels that the timing belt goes on you will have to reset the timing. Mark the timing points with something like whiteout so its easy to see. The timing mark on the toothed gears are small dots. The timing mark for the crankshaft is a small cut on the outer pulley. When its aligned with the intermediate wheel timing mark (there is an arrow on the cover as a hint) should intersect as viewed from the right wheel well. The camshaft timing mark should line up with the top of the engine near the front.

Power steering pump: It is held on with lots of bolts. One is in a channel that is hard to see but can be found with a 6" extension. If you look at the pump you will see three bolts that go into the housing. This should give you an idea where the forth is.

May 01, 2010 | 1995 Volkswagen Golf

1 Answer

My 1995 Toyota Tacoma 4 cylinder 2.7 liter automatic 4wd is missfireing on three of the four cylinders. The miss fire is very random happening more and more frequently. I have good compression and timing....


Pull codes from OBD computer go from there. Could be other problems, check fuel pressure, All electrical connectors- loose, water, dirty, ground connections, etc. Could be a failing sensor. How do you know its missfiring on 3-4? one or two cylinders would be a really bad shake. Creek is to deep stay out of creek. Good luck!

Mar 16, 2010 | 1995 Toyota Tacoma

1 Answer

My boyfriend is replacing his water pump and wants to know how to set the timing on his 1995 toyota tacoma Does anyone know how to do this?


timing gear has a mark.. the belt has a mark.. line them up.. you don't need to do anything else. the car computer adjusts engine timing

Dec 10, 2009 | Toyota Tacoma Cars & Trucks

1 Answer

97 dodge intripid accs belt frayed ( alt.ster.etc.) not a/c bel


I have a 97' intrepid 3.3 liter there is a tension pulley that moves. No need to loosen any nuts or bolts any where.

May 26, 2009 | 1997 Dodge Intrepid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...