Question about 2005 Chevrolet Silverado

1 Answer

REPLACE WASHER BOTTLE - 2005 Chevrolet Silverado

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Chevrolet Master
  • 78,267 Answers

  • Kneel next to the driver side front wheel well and note the bolt holding the inner fender well to the inner bumper. Use the socket wrench to remove the bolt holding the inner fender well to the inner bumper. Do not **** or jiggle the bolt as it is most likely fragile due to corrosion. Pull the inner fender well away from the inner bumper and tuck the fender behind the tire, exposing the windshield washer tank and the pump attached to it. Unplug the power cord from the wiper pump and the delivery hose from the pump nipple. Gently pull the inner bumper away from the Silverado to gain more room to grab onto the wiper pump. Grab the wiper pump with both hands and pry it off the tank, which holds the pump with two body tabs.

  • Posted on May 18, 2011


    1 Suggested Answer

    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    A 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    Good luck!

    Posted on Jan 02, 2017


    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    Washer fluid bottle

    images for Ford Freestar Washer fluid bottle

    How To Install Replace Windsheild Washer Reservoir Bottle ...

    ? 13:32
    Jun 11, 2012 - Uploaded by 1A Auto Parts
    How To Install Replace Windsheild Washer Reservoir Bottle FordEscape ... a broken, damaged, split or leaking windshield washer bottle.

    Jan 01, 2016 | Ford Freestar Cars & Trucks

    1 Answer

    How to replace windshield washer pump on 1996 cherokee 1996 xj

    washer bottle pump will be located at the bottom end of washer bottle tank,disconnect water hose and electrical connector .
    gently twist and wiggle out.
    To re install insert new seal in bottle apply some lub and push into washer bottle .
    reconnect hose wire electrical terminal .
    all should be good now..

    Mar 23, 2015 | Cars & Trucks

    1 Answer

    Leaking washer bottle

    Either replace the washer bottle or pull the pump and replace the pump some cases has had a pump leaking around the seal or a cracked pump due to adding water in the fluid bottle, never add water it will freeze and pop the pump

    Oct 20, 2013 | Maserati GranSport Cars & Trucks

    1 Answer

    Tell me how to replace the windshield washer pump. Thanks

    You have to remove the windshield washer bottle. The pump is located at the bottom of the bottle. Once the bottle is removed. Disconnect the wiring and hose to the pump. The pump should just pull out of the bottle. Then install the new pump. Reconnect the hose and wiring, and reinstall the bottle.

    Jan 27, 2011 | 1987 Ford Aerostar

    1 Answer

    Windsheild washer quit working

    Locate the bottle that holds your wiper washer fluid first check for fluid in bottle.Second check to see if small pump on bottom of bottle is working. If not check voltage at pump or replace pump.And last check for plugged hose between bottle and nozzles. Good luck

    Oct 09, 2010 | 1998 Toyota Corolla

    2 Answers

    Water leaking out of the washer bottle and appearing in the driver footwell- help

    replace washer bottle while its out silicone the inner fender where the water is coming thru

    Mar 04, 2010 | 2005 Hyundai Santa Fe

    1 Answer

    Windscreen washer not working - honda ascot innova 1993

    the motor is at the bottom of the bottle there should be a couple of screws that you will have to remove and it should then be able to pull it out to replace to motor/

    Mar 04, 2009 | 1996 Ford Taurus

    2 Answers

    1999 renault megane sport coupe

    disconnect the washer bottle plug connector. then run alive and earth wire direct from battery to washer motor to see if motor works that way, if does then new need a new washer switch on the steering column. if not then replace washer motor. should work after that unless pipes blocked.

    Jan 18, 2009 | 1986 Renault Sport

    1 Answer

    Washer bottle warning light stays on

    the sensor for the washer bottle level is in the washer bottle simply unplug the sensor located at the washer resavor and the light will go off then replace sensor

    Jan 08, 2009 | 1997 Ford Probe

    1 Answer


    this is a plastic bottle replace with one from the dealer or sometimes you get luck in a junkyard

    Jan 06, 2009 | 2003 Ford Focus

    Not finding what you are looking for?
    2005 Chevrolet Silverado Logo

    Related Topics:

    58 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts


    Level 3 Expert

    78267 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Ronny Bennett Sr.
    Ronny Bennett Sr.

    Level 3 Expert

    6927 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides