Question about 2002 GMC Sierra 1500

1 Answer

Just bough the truck,the loc is on the radio.how can i unlock it. don't know the code for it. thanks for any help!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Taken from:
http://autoforumz.com/Pontiac-Help-u...pict40505.html

GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.

If this doesn't work, you'll have to physically take the truck to a GM dealership, or purchase a new radio.

Posted on May 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need unlock code for a 2002 chevrolet silverado radio


Here at Fixya we do not have any access to the radio security codes for GM/Delco radio's. I recommend you seek help from the dealer on this.

Jul 20, 2012 | Cars & Trucks

1 Answer

I have a 2000 Malibu. It has a cassette and CD player and an auto tune button. My battery went dead, so I had it changed. Now my radio shows, what looks like, the digital code LOC. I don't know how...


the radio most likely has a security code activated & until you reactivate the code the radio will not work, you may have to take it to a place where they install radios to get the problem sorted out.........hope this helps........cheers,

Sep 16, 2011 | 2000 Chevrolet Malibu

2 Answers

Just got my car fixed and my radio locked up


This is a problem with the Theft-Loc system. I believe you will have to take it to the dealer to have the radio unlocked. I found this procedure on the web, but I don't know if it will work. Good luck.

1. Turn the ignition ON (The radio should display "LOC")

2. Hold down the Radio Presets 2 and 3 buttons for six seconds

3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.

4. Press the AM/FM button

5. The radio display changes to another three-digit number. Write this number to the right of the first one.

6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

7. Call 1-800-537-5140

8. Press 1 then # (pound). You'll hear "Invalid Code, try again"

9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *

10. Enter the number from STEP 6 then *

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.

Apr 19, 2011 | 1999 Pontiac Grand Prix

3 Answers

2000 chevy s-10 4 digit code for the radio, its locked


this did not work it says code 139010 is invalid to I cant get past step 8 or 9 my number from step 3 is 702 and step 5 is 706 someone please help Im going crazy

Nov 05, 2009 | 1998 Chevrolet S-10 Pickup

2 Answers

Radio stuck in "LOC"


you have locked the radio and will need to leave the ignition on for one hour to let it reset, then push 5&6 to get the code.  Radio should display --- and will let you try 3 codes then loc will display for one hour.  Just turn on the ign with engine off and pull parking brake to kill the drl lights.  And don't leve it unattended ;)   the code will need to be called in to obtain the unlock code.

Aug 16, 2009 | 1999 Saturn SL

2 Answers

Need code to unlock 1997 Jimmy Radio


the loc code is set the first time the radio is turned on. if you don't know the code there is no legal way to unlock it with out the tools at the dealership.

Aug 14, 2009 | 1998 GMC Jimmy

2 Answers

Radio


You can drive to the dealer and have them help you enter the code since they are alway's connecting and disconnecting battery's, The instructions are in the manual and the codes might be written in the front or back page. If no codes were programed try 0000 and see if that works. IF the dealer wants to charge you a crazy amount, you can get your codes here on www.radio-code.com Good luck and hope this helps.

Jun 03, 2009 | 1993 Chevrolet Astro

1 Answer

Radio stuck on loc


power radio on then hold 2 and 3

May 21, 2009 | 1999 Saturn SL

2 Answers

I have a 1999 chevy lumina LTZ and i change the battery after that my cd player locked asking me a code so can u please help me how to unlock the code. Thank you


Search the net for "Delco unlock codes" OR "Delco security codes" you should easily find a set of instructions telling you to get a code from your radio and then call an 800 number. Follow these instructions. This will give you the factory unlock code for your stereo. Worked for me and for heaven sakes don't pay anybody for this information - it's free.

Aug 04, 2008 | 1997 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

460 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...