Question about Hyundai Motor S

Open Question

My hyundai grace 1995 model,the injection pump is getting wild how to repair the lucas injection pump?

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: hyundai accent 1999 failed emission mot test

there are many
systems in your car that could cause it to fail emissions tests. lucas will not harm your car but it will not fix the problem either. the emission test should give you a reason for the failure. you should be able to track down the problem with step by step procedure for that particular system.
is your check engine light on? any generic scan tool can scan the vehicle data to determine witch system may be causing the problem. could be as simple as a tune up or a faulty o2 sensor.

Posted on Nov 26, 2009

Ad
czaa
  • 4536 Answers

SOURCE: i am doing repairs on

better chec the wiring or connections 1st--pull the plug from the pump and inspect for flaws and corrosion then plug back in--pump itself can be tested--the fuel injection pump in engine area may have issues

Posted on Feb 28, 2011

rickyrt441
  • 4399 Answers

SOURCE: when to replace timing belt

A timing belt can last 50,000 miles or the life of the vehicle. In all honesty, you just never know. It all depends how the belt looks. If it is wore or missing teeth, then it would need changed. But, without seeing it, I would recommend changing it at 100,000 miles. They almost always last longer then that.

Posted on Mar 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi L200 model 1995, injection pump top leak


have it inspected by an accredited diesel pump repair shop
some pumps can have the shaft seal replaced in situ , others have to have the pump removed to fit the seal

Mar 25, 2017 | Mitsubishi L200 Cars & Trucks

1 Answer

Hyundai accent 1500 1995 model fuel injection car will not rev higher than 2500 rpm


Try changing your fuel filter, if that does not fix your issue I would have the catalytic converter changed.

Jul 20, 2016 | Hyundai Motor 1995 Accent

1 Answer

I am doing repairs on a 100 series toyota diesel l/cruiser. my problem is, that i've changed a seized engine (2004 model) with a (1995 model), and both engines are the 100 series 1hz diesel range. But the...


better chec the wiring or connections 1st--pull the plug from the pump and inspect for flaws and corrosion then plug back in--pump itself can be tested--the fuel injection pump in engine area may have issues

Feb 28, 2011 | GMC Suburban Cars & Trucks

1 Answer

1994 jeep yj automatic wont shift into 3rd gear


Hey bro, pumps might be gummed up. Easiest thing I can suggest is go through all the gears manually to empty the pumps in the auto transmission. Then try it again. If no joy, then I'd change the transmission fluid and toss in some lucas oil transmission fix. Probably run you 40$ for the oil and lucas and take 30 min. It has saved my **** a few times and might just work. If it doesn't then you probably will need a new transmission, it is cheaper to replace it than to repair it in most cercumstances. Try the oil first, it's cheap and quick. Don't forget the lucas. And make sure to go through all the gears manually to empty the pumps. Cheers bro.

Apr 02, 2010 | 1995 Jeep Wrangler

1 Answer

Leaking power steering fluid hyundai elantra 2001 nitagrace2001@yahoo.com Anita Grace


figure out where it is leaking from and replace that part/hose or pump or rack

Feb 19, 2010 | Hyundai Elantra Cars & Trucks

1 Answer

1995 CHEVY 1500 6.5 TD NO START CRANKS OVER FINE DTC CODE #35 NEED TROUBLE TREE FOR NO START CODES


Found this online: GM Technical Service Bulletin #77-63-06Ab states that: "stalling, hard starting, and hesitation are symptoms of a failing PMD (Pump Mounted Driver) module." These symptoms usually (but not always) set a code 35 or 36 in the 1994 - 1995 models, or a code 1216 in the 1996 - up models. Often when this problem is diagnosed at a dealership or repair shop, the customer is told that the injection pump needs to be replaced. But in most cases, the PMD module can simply be replaced for a fraction of the price. ds4chevyfsd.jpgThe PMD module, (also referred to as the "Fuel Solonoid Driver") has been a major problem for Chevy / GMC 6.5L diesel owners since the introduction of the 6.5L electronically controlled DS4 fuel injection pump. It has been determined that heat is the primary cause of PMD failures. The PMD is mounted to the side of the fuel injection pump from the factory. But the injection pump does not provide adequate cooling to keep the PMD functional. Once the engine begins showing symptoms of hesitating, stalling and hard starting, the problem will only worsen with time. The problem only becomes more serious when considering the potential danger of your engine stalling in a situation such as pulling into heavy traffic or descending a steep hill and losing the use of power brakes and steering.

Hope this helps!

Nov 28, 2009 | 1995 Chevrolet K1500

1 Answer

Hyundai accent 1999 failed emission mot test


there are many
systems in your car that could cause it to fail emissions tests. lucas will not harm your car but it will not fix the problem either. the emission test should give you a reason for the failure. you should be able to track down the problem with step by step procedure for that particular system.
is your check engine light on? any generic scan tool can scan the vehicle data to determine witch system may be causing the problem. could be as simple as a tune up or a faulty o2 sensor.

Nov 26, 2009 | 1999 Hyundai Accent

1 Answer

No heat in my 1995 hyndia accent


The heater core is blocked. With any luck, you may be able to reverse the heater hoses. Be super careful not to get too wild as it is very easy to mess up the pipes or the connections! Also, you may try to flush it out with house pressure water. After it is now pumping out the heat, replace the coolant. Frankster016

Nov 22, 2008 | Hyundai Motor 1995 Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...