Question about 1999 Toyota Camry Solara

1 Answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock doors

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 14,036 Answers

Reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.

Posted on May 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

92 Toyota celcia battery died an now security system won't let it start? What can I do


If it is a factory security system, usually locking/unlocking the doors with the key fob will reset it. On some vehicles, locking/unlocking the drivers door with the key will also reset it

Jan 20, 2016 | Toyota Cars & Trucks

1 Answer

How do you bridge-out the anti-theft security system....it keeps kicking in and shutting down the van after starting


There is a problem detected within the security system by the security module. Try locking and unlocking the door with the key fob to reset the system. Sometimes locking and unlocking the drivers door using the key will reset the system as well. If still no luck, try the spare key to see if the security system accepts it

May 02, 2015 | 2001 Ford Windstar

2 Answers

Alarm wont stop sounding!


although you can open the door with a key ,unless the alarm system senses a fob key signal it will assume that the door is being opened illegally and will set of the alarm
keys can be cut for all cars requiring a key fob unit but the alarm is not cancelled and the engine will not start
you may have to get another key fob and have it programmed to the ECM system

Apr 23, 2015 | 1994 Chrysler Concorde

1 Answer

Security system now car won't start


Silly jeeps,had one like that also,If you have a remote key fob,lock and unlock with that,if not try locking and unlocking the drivers door with the key. Only thought I've got.

Dec 26, 2013 | 1995 Jeep Cherokee

1 Answer

My remotes stooped working on my 1999 Chrysler cirrus 2.5L. I disconnected the battery to do replace a CPS sensor and after I connected everything back I got a red security light on and no remotes wo


Have you tried to self program fob;switch ignition on as if starting but not starting,hold fob near to the keys and press open/close,doors should lock and unlock.If they do'nt you will need to program fob and require security code!

Jan 07, 2013 | Cars & Trucks

1 Answer

I changed my battery in my 2005 cadillac sts, and now it is showing that the starter is locked. fob locks and unlocks the car, but i can't get car to start. what do i do?


you can try this, with the battery connected lock the car using the key fob, make sure no keys are in the ignition. Disconnect the battery again and let it sit for 30 min or so, reconnect the battery and using the key fob unlock the car, it should start, if not repeat the procedure and insert the key into the door lock to unlock the car, both of these solutions should reset the security system. Good luck.

Sep 09, 2012 | 2005 Cadillac STS

1 Answer

WONT START.SECURITY LIGHT FLASHES WHEN TRYYING TO START


Anti Theft System - inmobilizer is actovated. Need disarm to start engine. Have you another key and fob? Try lock/unlock cycle with new key + fob. Your key may be corrupted.

Try also just unlocking the car with the key (not the fob) as soon as you unlock the door put the key in the ignition immediately and see if the car starts.

If you have your radio code it may be worth trying a total reset (leave the car unlocked) disconnect the battery and leave for 20 mins. then reconnect.

Hope help with this.

May 05, 2010 | 2000 Jaguar S-Type

2 Answers

Key fob / immobilizer not unlocking door


sounds like the security part of the system went bad
take the key fob to the dealer and have it reflashed
if that fails replace the security computer or you can disconnect it from the car you won't have the system but the hazards won't come on unless you turn them on

Feb 25, 2010 | 1997 Volkswagen Golf

1 Answer

99 dodge Durango security bypass key fob broke


Try unlocking the the door with the key and then lock and then unlock again the may disable the security system

Jan 31, 2010 | 1998 Dodge Durango

1 Answer

'98 Saturn SL1 won't start. Alarm system behaving strangely. Have power, turn key-nothing. Then it will start for no reason. Drove it home (20 miles), shut it off and it won't start again. Changed battery...


I had this same exact problem in a family member's Saturn. If you are opening the door with the key and not using the key FOB to unlock the doors, then the security system will not allow you to start the car. You will notice when this happens that the dome light will blink and you'll hear the relay in the BCM clicking.

In order to stop the security system from doing this: Make sure the car is locked with the key fob by hitting the lock button. Then hit the unlock button on the key fob once and then once again (I do it out of habit). Then open the driver side door, put the key in and it should start no problem.

Dec 31, 2009 | 1998 Saturn SL

Not finding what you are looking for?
1999 Toyota Camry Solara Logo

1,459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...