Question about Chevrolet 1500

1 Answer

What would be the problem with my ac on my 95 chevy ck1500 truck if the clutch want engage when the ac is turned on but will engage when you by pass it.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 8,531 Answers

Hi, the system will not engage the clutch if the pressure is low. It is likely your system needs a recharge. Since you know how to bypass, you can recharge the system yourself by purchasing a can of refrigerant and using a A/C recharge hose on the low pressure port. Please see my tip at http://www.fixya.com/cars/r5833579-auto_truck_c_recharge . These are genericinstructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 chevy cheyenne. My ac pump doesn't


Have you checked to see if the system has enough freon ?
If the system is low or empty the low pressure switch will prevent power from going to the compressor clutch.

Aug 29, 2013 | Cars & Trucks

1 Answer

97 chevy suburban AC clutch won't engage pressures


Looks like the low pressure switch gets power from a 10amp ac fuse. Power then goes to the ac relay which is powered on by the ac heat controller on the dash. Power then goes thru the high pressure switch to the compressor. The ac relay is grounded to the body. Do you have power on the lite and dark green wires going into the relay and is it grounded ?

Jul 26, 2013 | Cars & Trucks

1 Answer

No A/C


Could be the main control panel. The ac clutch will engage if it gets power and the system is full of freon. The air should switch to the other vents even if the ac clutch does not engage.
You may need a shop manual to get the wiring diagrams to troubleshoot the system.

Jun 30, 2013 | Cars & Trucks

1 Answer

Have a 95 grand jeep chrokee limited 5.2 liter pcm will not ingauge AC clutch relay


the AC compressor has a "shutdown switch" when not enough refrigerant is in the system run a wire from the

run a wire from the + battery cable to the compressor pulley switch with the engine running, ac on if the compressor clucth engages (turns) you have low refrigerant charge





=

Feb 05, 2013 | 1995 Jeep Grand Cherokee

1 Answer

Compressor and fans do not turn on until rev engine


I passed this question the first time I read it, so I will take a stab at it now.
The fans don't come on until the compressor has pumped the freon pressure up to say 150 or 200 psi. And the compressor clutch has to have voltage to engage the clutch.
I wonder if the clutch is going and needs 14 volts instead of 12 to engage ? Or the relay that powers the clutch ?
Speeding up the engine would increase voltage from the alternator.
This is assuming the serpentine belt is tight and everything else is working correctly.
I think I would swap the relay with another and put a meter on that circuit to the ac clutch to see what it takes to engage it.

Jul 24, 2012 | 1992 Buick Regal

1 Answer

I have 2002 Chevy s10 with ac issues. All blend doors and actuators work properly. Clutch engages on compressor. Blows warm air when ac is on. When I put a guage on it the psI stays on max and doesn't...


Yes. When you turn on the compressor via clutch Suction line pressures at around 3000 rpm should be around 30 PSI. If pressure stays high it is because the compressor is running but it is not doing squat and needs replacement - bad reed valves.

Sep 04, 2017 | Cars & Trucks

2 Answers

AC Compressor not engaging on 2000 Chevy Impala. Fuses and AC relay okay. No power at compressor. Need wiring diagram. Also need to know if compressor requires 12v for operation. If not what should voltage...


When your R-134a runs too low it will NOT engage the compressor. You need to refill your a/c system before the clutch will engage, I also suggest finding the leak.

Apr 20, 2010 | 2000 Chevrolet Impala

1 Answer

Ac pressure is high


Is the clutch turning on the compressor when the gauge reads 45

May 18, 2009 | 1995 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...