Question about 2006 Chevrolet Trailblazer Ext

1 Answer

My 2006 trailblazer the switch want turn for me to get the keys out so i need to remove the positive so my battery want go dead. i tried to un screw the bolt and i cant get it loose. need help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,163 Answers

Ignition switch needs to be replaced, common problem. To get your key out: look under the key on the column cover. You'll either see a hole there or an outline where a hole was supposed to be. If the hole is there, push in the solenoid to release your key. If the hole isn't there, carefully cut or drill the plastic out there, and push the solenoid there. I believe they quit putting the hole there in 03', BUT like mine, you'll see a faint outline in the plastic of a hole. -->

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jump start trailblazer will run that day but next day it is dead there is a short some where


2006 Trailblazer won't start - Discussion on Topix

www.topix.com > Chevrolet TrailBlazer
Sep 6, 2012 - My 2006 Trailblazer will not start, bought a new battery, still will notstart, not even with a jump. ... i get a jump i drive it and charged the battery it seemed fine but then i went ... Then, next morning, when I turn key, all lights come on and radio... back a day and 360$ well that pos still will crank but will not start. 02 trailblazer a/c problem
Jul 21, 2011
2003 trailblazer key is stuck in ignition
Dec 21, 2009
2003 Chevy Trailblazer will not start
Jul 21, 2009
2002 trailblazers won't start
Aug 24, 2007
More results from www.topix.com

Oct 29, 2015 | 2005 Chevrolet TrailBlazer

1 Answer

Car wnt start, can't remove key from starting cololm


it is because the battery is dead charge or replace battery

Feb 03, 2013 | 2006 Cadillac STS V8

1 Answer

How to change ignition key for 2006 chevy cobalt


remove the plastic cover from the steering colum then you will see the switch on the left side remove the 2 screws you will need to turn the key to release the switch reverse to put together then you will need to relearn the switch to the body control module this is done by turning to crank and leaving it in the run position til the security light stops flashing you will need to do this three time after the third time remove the key for a min then start the car if possible but on a battery charger if the battery goes died during the relearn you will need to start over

Apr 21, 2012 | Cars & Trucks

1 Answer

Key stuck in ingnition


If your battery goes dead, the ignition locks the key in ignition switch. You put a new battery in and you'll be able to remove the key
your anti theft system may be enabled. Did you play with the power door locks before starting
Under the ign lock assbly there is a small plastic plug... pop the plug out and stick a small screw driver in...u should imediately feel a spring load button in there. Push up with the screw driver and turn key back, it will come out.

Dec 24, 2011 | 2003 Chevrolet TrailBlazer

2 Answers

The car wont start, the brake pedal is locked like the anti-theft is active, the anti theft light is flashing when the keys are in the ignition. when i try to turn it on it doesnt turn over, just makes...


TRY REPROGRAM KEY .PUT KEY IN IGNITION SWITCH TURN IGNITION SWITCH ON POSITION 20 SECONDS DONT START ENGINE WAIT 20 SECONDS TURN OFF SWITCH THEN TURN SWITCH BACK ON 20 SECONDS WATCH THE THEFT SECURITY LIGHT BLINKING.WHEN THEFT STOP BLINKING VECHICLE WILL CRANK.IF LIGHT STILL BLINKING.TRY FEW MORE TIMES KEY IN SWITCH ON POSITION FOR 20 SECONDS.MAKE SURE YOU HAVE THE CORRECT CAR KEYS IN SWITCH IF NOT WRONG SET OF CAR KEYS WILL SET OFF THEFT SECURITY SYSTEM.IF KEY RESETTING TRICK DONT WORK.CHECK BATTERY POWER MAKE SURE YOUR BATTERY HAS 12.5 VOLTS AND CHECK SECURITY THEFT FUSE.IF ALL LOOKS GOOD YOUR SECURITY HAS TO BE CHECKED OUT AT THE DEALERSHIP.

Oct 08, 2010 | 2006 Ford Fusion

2 Answers

My car just stop starting,i will jump it,by morning it is dead,i replaced battery and alltenatior,what could it be? check engine light isnt on


there is a drain in the system,
all you need is a test light
un hook the positive battery cable
connect the test light between the positive lead and the battery terminal
if there is a drain the light will lit
remove each fuse at a time ( put it back if the light does not go out )
which ever fuse that you remove and make the light goes out, that's the one that cause the drain.
check and fix that system

Mar 04, 2010 | 1992 Oldsmobile Ninety Eight

2 Answers

2006 Chevy Trailblazer without warning completely goes dead


Sounds like a dead battery, loose or dirty battery cable connections.

Aug 21, 2009 | 2006 Chevrolet Trailblazer

2 Answers

Broken key in ignition


you can only push this detent pin in when ignition is in on position try to put key that snapped in and wriggle it around to try and turn ignition to on position so then you can remove barrel
if cant turn need to change whole assembly by un doing shear pin for clamp that holds whole assembly on steering column or do what some lock smiths do drill out old barrel slowly and going up in drill sizes until barrel comes out from housing without damaging housing

Jun 29, 2009 | 1992 Chevrolet Corsica

1 Answer

2006 Trailblazer won't start


I have had a similar problem with my 06 Trailblazer SS. Took it to the dealer and apparently this is a common occurrence. They replaced my key cylinder and explained that this was because the cylinder was intermittently not completing the start circuit. It seemed to work after that. Now in the dead of winter I am having more starting issues with the vehicle.

Jan 11, 2009 | 2006 Chevrolet Trailblazer Ext

Not finding what you are looking for?
Cars & Trucks Logo

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...