Question about Chevrolet 1500

1 Answer

1995 yukon grinding noise when i accelerate in 2wheel drive if its in 4 wd no noise, seems to be coming from transfer case 120000 miles when i let up on accel. its ok idrive for awhile and its fine please help thanks

Posted by on

  • Jason Conway
    Jason Conway May 18, 2011

    is it push button 4wd or so you pull a lever. If a lever, it sounds like it not completly comin out of 4wd. Try backing up after putting in 2wd. back up at least ten feet. That may not work but i like to start at the easiest. Also try having someone pull the lever for 4wd. put it from 4wd to 2wd while someone is under the truck. You will be looking for the linkage. It may need grease, sometimes from not being used during non winter months the become stuck. please let me know if this helps at all. Message me back, illdo some research

  • tonyandsharo May 18, 2011

    Thanks a million for the tip. Will try it tomorrow.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 104 Answers

Whats happening is the side gears in your transfer case are worn possible even broken ...whinieing gears are worn grinding gears are when some of the teeth are broken

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 chevy k1500 4x4 Makes a weird noise when in 2wheel and goes away when in 4 weel drive. Noise is in right front. transfer case location.


most likely a thrush washer is at fault since the 4x4 kicks in for you
Have a trans shop give you an idea how much to repair before you grind this thrust washer to bits

Feb 19, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Auto locks for front 4x4 2007 f150 cant stop grinding noise


Are you under warranty? Make it the dealers problem if its eligible.

If the front hubs are grinding regardless of being in 2wheel or 4wheel drive it can be the hub bearings which turn regardless. If it grinds only when in 4x4 then the wheel shafts or differential or front driveshaft or transfer case is making the noise because all of these parts move when in 4wheel drive.

Nov 09, 2009 | Ford F-150 Cars & Trucks

1 Answer

Grinding noise coming from 97 GMC Yukon transfer case


Hi!!!! I have the same problem with mine. Did you solve it????

Oct 01, 2009 | 1992 GMC Yukon

2 Answers

"gear grinding" noise on acceleration, 2 wheel high only


You need to get the truck in the air on a lift, properly! and put it in gear and listin w/ a stethascope, you'll find your noise.

Jun 10, 2009 | 1996 Chevrolet C1500

1 Answer

Grinding noise in the transfer case


it duse not sound good. sound like your tranfre case is on its way out.but i would have it antillies frist you may have a bad sencer

May 31, 2009 | 1997 Dodge Ram 2500 Club Cab

1 Answer

99 Silverado 4-wheel drive not engaging


It does not seem that sufficient diagnosis was done. No, you cant give a specific diagnosis like that without tearing unit down. It's likely that they told you the most common failure and left it at that. Likely there is a problem with your unit...I think this becomes more of a trust issue than a mechanical one. A second opinion from an independent reputable shop may help but either way, you need to have it fixed. In not using it much, it makes me wonder how it got worn.
good luck

Mar 19, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

2003 Dodge Durango vibrates at 60 mph


Check the transfer case and u-joints for wear.

Mar 07, 2009 | 2003 Dodge Durango

1 Answer

4wheel drive service light comes on


its a possibility that the transfer case might be going out or the fluids in it are bad sometimes after alot of mileage the tranfer case will slip or stick

Nov 29, 2008 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...