Question about 2005 Hyundai Tucson

2 Answers

My reverse lights do not work on my car? we have checked the fuse and the light bulbs. I had my clutch replaced . . . would that effect the lights?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,489 Answers

Yes it would if they didn't hook the reverse lamp switch back up. Tack it back to them and have them finish the job. All they are going to find is an unplugged connector and should be able to have it back to you in about 5 - 10 minutes. Let me know if you need anything else.

Posted on May 18, 2011

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 104 Answers

No there is nothing that would effect your reverse lights unless they dissconnected a ground wire while they were replacing the clutch

Posted on May 18, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reverse light not working what to do


If bulbs are good then you need to check the switch that powers them when you put the car into reverse.

FYI - Neutral safety switch prevents car from starting unless it is in neutral transmission position only.

Oct 05, 2015 | Cars & Trucks

1 Answer

Hyundai tuscon 05. Reverse light doesnt work, bulb fine ,fuse are good and new switch installed. What next?


Does bulb socket have a ground wire, or just uses mounting point as ground? Check for voltage at each part of system. Start with fuse, then switch both in and out of reverse, then bulb.

Dec 19, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

1 Answer

Reversing lights not working


Hello!

Is it that only 1 light goes on? Or is the problem effecting both backup lights?

If it is only 1 light with the problem, you probably just need to replace the bulb with a new one. But if it is both lights then you may need a fuse or some other troubleshooting methods.

Check out whether both bulbs are out, if not, post back for further assistance.

Best regards,
EJ Kudelka

Mar 13, 2012 | Hyundai Excel Cars & Trucks

1 Answer

I have replaced reverse light bulb, however new bulb will not work. I have checked the bulb, the fuses and the wiring, any ideas why can't get it work. Also indicator on dash still present.


The reverse light switch is a mechanical device used to control operation of the vehicle reverse lights. The switch is designed to complete the circuit when reverse gear is selected allowing reverse light operation (manual transmission only).

Aug 04, 2011 | Audi A3 Cars & Trucks

2 Answers

1988 pathfinder no dash lights no revers lights no tail lights no gaiges


If they all stopped working at the same time then it is probably a fuse or possibly 2. Check your fuse panels in the dash and under the hood. The dash lights and gauges should be a fuse labeled instrument cluster or guages, it is probably blown. The other fuse to look for will be the tail light fuse. This is where I would begin.

Sep 23, 2010 | 1988 Nissan Pathfinder

3 Answers

The back-up lights don't come on in reverse and the lock/unlock buttons are inoperative


check fuse #5 15 amp red for back up lights.

check fuse #3, 30 amp in box under hood for door locks.

Jul 03, 2009 | 1997 Ford Expedition

2 Answers

Reverse lights wont work


On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Mar 15, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2005 Hyundai Tucson Logo

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...