Question about 1999 Oldsmobile Alero

1 Answer

Toyota tarago 2002 vvti,when i switch off the engine and i restart the engine,(without taking out the key) if it starts and i let go of the accelerator the revs just drop and conks out.or it kicks over but wont start.i have found that when i remove the key and wait couple seconds then its starts and runs normal.so basically if i shut of engine i have to pull out key and reinsert to start up.can you help?.

Posted by on

  • petergrigori May 19, 2011

    hi,the key is fairly new.the ignition switch is about 6mths old.last sat i changed the battery.any other suggestions.thx

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 14,036 Answers

Could have worn key or faulty ignition switch try another ignition key.if key worn out immobilizer and ecm can read key code.the theft control system will shut down fuel system.

Posted on May 18, 2011

  • Jonah Oneal May 22, 2011

    IF KEYS AND IGNITION SWITCH OKAY.REPLACE FUEL FILTER, CLEAN FUEL INJECTORS, CHANGE SPARK PLUGS.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i got a toyota tarago 96 model that wont start my wife was driving and she heard a bang then the car stopped in the middle of the street so i changed filters n spark plugs n pumps still no start


There are videos on you tube for diagnosing vehicle no start problems ! Rather then just replacing parts . Testing for spark and fuel pressure and engine compression . Timing chain problems etc... My advice to you would be take your vehicle to a qualified repair shop . Save yourself some money . You spent how much already ? i changed filters n spark plugs n pumps still no start !!!!!!!

Dec 20, 2016 | Toyota Cars & Trucks

1 Answer

P1354


I found this on a google search i hope it will help you as the engine is the same QUESTION: , 2001 Avalon 145,000 miles. Recently developed rough idle when warm. Today produced codes of P1150, P1354. It points to the VVT system. Can a DIY diagnose and repair from home?

Thanks,
John

ANSWER: The P1354 code is for the VVTi malfunction on bank2 which is the cylinder head near the firewall, the 1150 code is for the air.fuel ratio sensor on the same head, the VVTi code can cause the A/F ratio sensor to go out of range, the main cause is the P1354 code which should be delt with first, this can be caused by a worn timing belt that has junped a tooth on the sprocket, this should be checked first, at this mileage if it has never been replaced it may be the problem. If your scanner can read live data see where the engine timing is at.
If the timing is not the problem it may be a bad oil control valve for the VVTi system, to be sure it should be active tested using a diagnostic tool that is capable of doing so, activating the system at idle should cause the engine run rough at idle, if there is no effect on the engine the VVTi is not activated and the problem may be the OCV.

May 28, 2013 | Toyota Avalon Cars & Trucks

1 Answer

Toyota Celica 140 vvti 2002 Engine starts normaally but as soon as full temperature is reached the engine cuts out; it can be restarted but revs must be kept to about 3000 or above or engine stalls.


Two things I would check. first I would pull the Idle air control motor off and clean it and make sure it is working properly put lube on it i necessary. Next would be the engine coolant sensor. But I think the first will take care of your problem The IAC motor is mounted on the throttle body.

May 01, 2011 | 2002 Toyota Celica

1 Answer

Fan belt installation for 2002 tarago


there should be a white sticker on the radiator shield showing the routing

Jan 21, 2010 | 2002 Toyota Tacoma

1 Answer

2004 180 COROLLA VVTI 1ZZ ENGINE BEARING KNOCK, NEED TO PEPLACE ENGINE? ONLY DONE 110000KM


you need to adjust it.. take it to a dealer probly cost you a lil bit 400 bucks.. but its a toyota you defenitely dont need a new engine .. just a lil tuning will do the job.. also check if its the water pump that might be the knocking sound your hearing common sickness for vvti engines..

Dec 22, 2009 | 2003 Toyota Corolla

1 Answer

Toyota rav4 is quite noisy when waiting traffic lights


Well its tough to diagnose the noisey part without hearing it, but I would suggest having the throttle body cleaned out, its probably just dirty and restricting air a bit.

Jan 29, 2009 | 2002 Toyota RAV4

2 Answers

Toyota tarago 2az fe motor


Rustam.Where is the fuse for radio of 2003 toyota tarago

Jul 05, 2008 | 2003 Toyota Camry

Not finding what you are looking for?
1999 Oldsmobile Alero Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...