Question about 1999 Ford Crown Victoria

1 Answer

THE NEW OIL FILTER WILL NOT GO ON 1999 CROWN VICTORIA, WAS ONCE TOLD THAT THE MANUFACTURE IS DIFFERENT FROM WHAT THEY ONCE WERE?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,520 Answers

Hello, I have used the same filter from a 1994 on a 2002. I guess anything is possible from the wrong filter in a box to a incorrect ID. The screw-on filter may have a different opening size as a 9/16 being changed to a 5/8(10/16). Just take the old filter in to size the mounting hole and press the old filter against the new one to compare the size of the rubber washer.

There were short filters and tall filters which did the same job. Also if using a cap end wrench, the shape of the end of the filter may be different and you may need 2 end cap wrenches to do the job. Sometimes you need a parts counter person to look up what you had.

A different brand for your old filter can be interchanged with the brand they carry. They need to look in a book referred to as an OSI, which means obsolete, superceded, or Interchange. The recommended filter for the 4.6L is an MIFL 820 S in a Motorcraft filter.

Posted on May 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the motor and transmission for a 1999 crown victoria work in a 1993 grand marquis?


I would say no. The intakes are completely different on these cars and I have found the bolt patterns for the intakes are not the same and that probably goes for the exhaust manifolds also.

Apr 07, 2013 | 1999 Ford Crown Victoria

Tip

How To Install Replace Engine Air Filter Crown Victoria Grand Marquis 92-11...


How To Install Replace Engine Air Filter Crown Victoria Grand Marquis 92-11 1AAuto.com

on May 18, 2012 | 1999 Mercury Grand Marquis

2 Answers

Oo.com my 2004 ford crown victoria oil gauge goes from high to low and then stay under the low when i checked the oil it had plenty but it sounds like my motor is tapping please help!!!!!!!!!!!


You may need to change the oil filter; if it has become clogged, there will be such a pressure drop across it that the rest of the engine does not receive proper lubrication and the gauge reads low despite the presence of oil. Keep in mind that this gauge reads the oil pressure, not the oil level.
You may also have an issue with the oil pump itself, but the first thing to do is change the oil and filter. Often times, having this done at one of those jiffy lube places or something like that, they will change the oil but not the filter because they are lazy and figure you won't notice the difference.
Good Luck!

Mar 28, 2011 | 1995 Ford Crown Victoria

2 Answers

What type of transmisson oil do I use for a 1996 ford crown victoria and oil filter


The fluid you need is called mercon type ATF this is what ford recommends to use and should say it on the bottle. as for a filter for the transmission or engine I recommend motorcraft filters they meet ford specifications and are available at most auto parts stores.

Mar 04, 2011 | 1996 Ford Crown Victoria

1 Answer

1992 Ford Crown Victoria Oil Pan is leaking. Is this a major problem to replace? Fred


It is recommended that you lift out the engine before attempting to replace the oil pan. Once the engine is lifted you can remove the bolts, remove the pan, clean all the old gasket material.
Installation: Remove the rear main bearing cap oil seal Remove the timing cover oil seal Clean all the mating surfaces and seal grooves Install new oil pan front cover seals Install a new rear main bearing cap oil seal Install new oil pan side gaskets on the block Make sure the tabs of the front and rear seal fit properly as these are critical spots Attach the oil pan to the engine block and install the retaining bolts

Feb 23, 2011 | 1992 Ford Crown Victoria

2 Answers

My engine oil dipstick is missing on my 1999 ford crown victoria 5.6 liter engine what is the length of it so i can get a universal one


GO TO ANY AUTO PARTS STORE TELL THEM YOU HAVE 1999 FORD CROWN VICTORIA WITH A 4.6L ENGINE.THEY SHOULD HAVE A UNIVERAL OIL DIP STICK FOR YOUR CAR.

Feb 14, 2011 | 1988 Ford Crown Victoria

1 Answer

93 crown victoria.leaking oil under the oil pump of the motor


The oil pump is in the pan you may be leeking oil from the oil sending unit next to the oil filter or the filter may be leeking . get under vehicle after safely securing it wipe off and figure out where it is leaking from if oil pan is rusted through replace oil pan. usually its the oil sending unit switch usually under 20 dollars for part and it screws on and off

Nov 21, 2010 | 1993 Ford Crown Victoria

1 Answer

What is the tapping sound under my hood that causes my car to shut off when i come to a stop i have a 1999 crown victoria its like its not getting enough gas


probably blown a lifter. means valves are not operating properly starving the engine out. this sometimes happens if you use cheap (ie generic store brand) oil or you run with dirty oil, once the lifters fail the only thing you can do pretty much is replace them. i would recommend getting a mechanic to confirm this before you go ripping the heads apart as this can be a tedious and sometimes costly job.

Mar 22, 2010 | 1999 Ford Crown Victoria

2 Answers

Whats the engine oil capacity for a 1999 ford crown victoria


look in the manual it will tell u...otherwise just google it

Aug 06, 2009 | 1999 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...