Question about Plymouth Voyager

1 Answer

Am fixing a transmission out of a '92 plymouth voyager with the 3.3 engine. My problem is that we can't find in our book what the torque bolt settings are. We are putting in back into the vehicle this Sat. Please help.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,252 Answers

Manual ....

Torque the transaxle mounting bolts to 70 ft. lbs. (95Nm)
The bolts used for position No. 1 and No.3 are the same length. On some vehicles, the bolt in the No.2 position is longer. If bolt No. 2 is used in position No. 3 it can damage the selector shaft housing when the bolt is seated. so be careful...

Posted on May 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How to remove and replace auto transmission ?


Its a big job gave you and example for neon

Jan 18, 2015 | 2001 Chrysler Voyager

1 Answer

Can I put a 98 Plymouth voyager transmission into a 2000 Plymouth voyager


The books say no. If all the electrical connections are the same, go for it but look at them closely. Also you will want to use the flexplate (flywheel) from the donor vehicle. It was right around 98 or 99 that Chrysler changed the bolt pattern on the torque converter. Chrysler motors are balanced by the torque converter, and this means the four converter bolt holes are not evenly spaced, and must be in the correct alignment to get all four bolts installed. one of the holes in the flywheel has flat sides. If you get that bolt in, and any other bolt in, the other two will go in. if you put that one in and the next one won't go, you need to remove that bolt and rotate the converter to the next hole. do yourself a favor and turn the converter the same way each time to avoid trying positions already tried.

Aug 17, 2011 | Chrysler Voyager Cars & Trucks

1 Answer

How to change the flywheel in a 97 plymouth voyager


Remove either the engine, or transmission. It's between them, bolted to the engine crank, and then to the torque converter if it's an automatic, or has the clutch and pressure plate if it's a standard.

Jun 25, 2011 | Plymouth Voyager Cars & Trucks

1 Answer

What is the torque setting on the bolt that fastens the drive pulley to the crank shaft on a 98 Plymouth voyager 3.0 L engine.


Torque setting for harmonic balancer / pulley on the 2.5 and 3.0 engine is 132 ft/lbs

Please remember to rate this answer! Thanks, Mike

Jun 12, 2011 | 1998 Plymouth Voyager

1 Answer

I wastold Ihave to degree the head bolts on a 94 plymouth voyager 3.0 after torquing. do you know how and how much?


go to any auto parts store and buy a haynes manual for your vehicle. they are based on a complete teardown. for about 20.00. it will tell in this book.if no luck, a dealer for your vehicle can tell you. or give you a read out of the proper torque settings for your engine. see the service dept.

Apr 19, 2011 | Plymouth Grand Voyager Cars & Trucks

1 Answer

Head bolt Torque specs for a 1998 Plymouth Voyager


according to the manual

Step 1: Bolts 1 - 8 to 61 N·m (45 ft. lbs.)

† Step 2: Bolts 1 - 8 to 88 N·m (65 ft. lbs.)

† Step 3: Bolts 1 - 8 (again) to 88 N·m (65 ft. lbs.)

† Step 4: Bolts 1 - 8 turn an additional 1/4 Turn.

(Do not use a torque wrench for this step.)

NOTE: Bolt torque after 1/4 turn should be over 122
N·m (90 ft. lbs.). If not, replace the bolt.

Nov 25, 2010 | 1998 Plymouth Voyager

1 Answer

TORQUE SPECS. AND PATTERN FOR PLYMOUTH 2.4 LITRE I4


Are you asking for the wheel torque specs. or some other part of the car such as the engine head bolts etc.?
If it is the wheel lug nuts they are 80-100 ftlbs. and you should go in a criss-cross pattern. For example if you have 5 lugs nuts and the top one is say number one 1 I would go in a clockwise direction doing 1, 3, 5, 2, 4 then repeat. If you have four then it is 1,3,4,2. Hope this helps.

Aug 20, 2010 | 1998 Plymouth Voyager

1 Answer

1994 plymouth voyager, not shifting into drive


Not shifting? or is the tranny dust? Is this mechanical (in the linkage) or does the transmission "spin" when put into Drive?

The Voyager is infamous for it's bad transmissions.. Craigslist is "littered" with Caravans and Voyagers that need transmissions.. The replacement can cost as much as $2600.. and finding a used one is not always easy.. the cheapest and best way to replace it is get a rebuilt one.. and do it yourself.. it is time consuming yet fairly simple on the 3.0 engine. The hardest part is seperating the struts.. this might be a two man job.. BTW.. don't let the torque converter fall out of the transmission.. get a book if you attempt this repair at home.. jack he van up as high as you can.. the engine is easily supported with a couple of 2x4 cut to fit..

I have replaced a transmission on 1995 Caravan..

Jim

May 15, 2010 | 1994 Plymouth Voyager

1 Answer

I need to replace my puel pump for plymouth voyeger 1999.


The fuel pump in a Plymouth Voyager is electric so you should check the fuses and relays before inspecting the fuel pump itself. If you have fuel in your tank but your vehicle has difficulty getting fuel, you may need to clean your fuel pump or replace it entirely. The Plymouth Voyager comes in a variety of styles and this may affect your choice of fuel pump.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Things You'll Need:
  • Fuel pump kit
  • Socket wrench set
  • Torque wrench
  1. Step 1 Determine the fuel pump that your Plymouth Voyager will require. This depends on the make and model and engine size of your vehicle. Models manufactured from 1991 to 1995 came with a 2.5 L K, 3.0 L Mitsubishi 6G72, 3.3L EGA or 3.8 L EGH engine. Models made after 1995 may have a 2.4 L EDZ, 3.0 L Mitsubishi 6G72, 3.3 L EGA or 3.8 L EGH engine.
  2. Step 2 Relieve the fuel2_bing.gif system pressure and drain the fuel tank. Disconnect the negative battery cable with a socket wrench.
  3. Step 3 Support the fuel tank and loosen the strap bolts with a socket wrench. Remove the fuel line and electrical harness for the fuel pump.
  4. Step 4 Lower the fuel tank so that you can remove the lock ring for the fuel pump. This will allow you to remove the fuel pump.
  5. Step 5 Install the new fuel pump using the items included in the kit. Use a torque wrench to tighten the lock ring and bolts for the main fuel tank straps to 40 ft. lbs. Torque the bolts on the T strap for the fuel tank to 250 in. lbs.
  6. Step 6 Complete the installation by reversing the removal procedure.

Feb 19, 2010 | 1999 Plymouth Voyager

1 Answer

Was the conveter supose to spin freely when bolted


I take it you were installing a transmission or engine that caused you to unblot the torque converter? The drive plate is bolted to the crankshaft, the torque converter is bolted to the drive plate, it should turn with the engine only. Hope this helps, let me know

Dec 10, 2009 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...