Question about 1993 Honda Accord

1 Answer

My check engine light blinks 6 times what are my codes

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 133 Answers

Http://www.cb7tuner.com/vbb/showthread.php?t=21259

this is a list of all the check engine light codes, and it looks like its your water temperature sensore. its right under the distributor and has two wires comming out of it. and that website that link takes you to covers your type of honda(cb7 or 90-93 accord) from top to bottom, so i recommend you register and use the website to solve any other problems you might have on your car. hope this helps. goodluck.

Posted on May 18, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code 64 for mazda b3000 2001? Its an air bag


should be the engine light blinking the code flash

paper clip trick on the diagnostic port
no information on 64

if you have an air bag fault needs the obd2 diagnostic reader
to locate the fault ,, fix ,, then reset the srs system

Oct 22, 2016 | Mazda Cars & Trucks

2 Answers

Engine checks lights on,blink 6 times then shut off,what seems to be the problem?


DIYer? If not, time to take by a competent service shop, or the dealer. The 6 blink probably is an error code for a major problem. When did you last service the car according to MFG instructions? Check all fluids.

May 05, 2015 | 1993 Honda Accord

2 Answers

Toyaota Camry 1994 engine won't start, Engine light on


I would check for fuel,(pressure and injector pulse), spark, and compression, before checking any codes. Lack of any of these basics can result in codes, and then you waste alot of time chasing a symptom, instead of the actual problem.If more people followed basic diagnostics, which always come back to these three basics, rather than chasing codes first,they would find no starts much more quickly.

Nov 14, 2011 | 1994 Toyota Camry

2 Answers

Error codes for 1991 dodge spirit


Turn the key to run then off, back to run, then off, then to run and leave it on. The check engine light will be on and will then go off and then on again according to the codes the engine controler happens to have in it. If the check engine light was on when you stopped the car, then there is at least one code in the controler. The light will blink the codes like this.
Cycle the key three times and leave on on the third time. light on for about 3-4 seconds then goes out for about 2 seconds and then blinks one time and goes out for 3 seconds this is for the no.1. Then the light blinks 3 times and goes out for about 3-4 seconds. You have the code 13. You could have a whole string of codes in the controler memory. It could be something like this. key cycled 3 times, light on for 3-4 seconds, then blinks 1 time, pause, 3 times, longer pause, 2 times ,pause 4 times, longer pause, then 5 times, pause 5 times the goes out.
This is code ; 13,24, 55. code 55 isn't really a code. It just tells you it's the end of any codes the controller has.
If you disconnect the battery and hook it back, you will have code 13 which simply mean 'battery disconnect'. It will errace it's self after several starts if it's not disconnected again. If you cycle the key and you get 55, this means there are no codes recorded at this time.
You will allways get 55 when checking for codes wheather there are fault codes or not. The light on for a few second before the codes start flashing is only a bulb check. Some codes like 13 will not turn the check engine on, but but will leave a code for diagnostic purposes only. If you have the check engine light on and accellerate and the light begains to blink, then the controller is telling you that you have an engine miss and are running the chance of burning out you're catalatic converter if you continue driving. Sometimes its advised to disconnect the battery after you have recorded the codes.
This will erase all codes that are present but were generated by conditions that aren't pertanent to the present condition. and then the codes that come back are the real ones to address.
This link: http://minimopar.knizefamily.net/fault/index.html
Contains the entire list of Chrysler Engine Error Codes.


Mar 03, 2011 | 1991 Dodge Spirit

1 Answer

How can i check the code for the check engine light without using a meter. I hear there is a way to check the number of times the check engine light blinks with a manual procedure. I have the codes just...


Turn the ignition switch on off on off on off on. After the third time the check engine light should start blinking codes. It will start with 12. That is the start of codes code. It will end with 55. That is the end of codes code. You just want to know what codes are inbetween 12 and 55

Apr 08, 2010 | 1992 Chrysler Lebaron

3 Answers

Check engine light came on and stayed on


Put the Key into the Ignition and turn from OFF to ON (not START) Position, which is right before Start and do this three (3) times. On the third time leave the Key in the ON (not Start) Position.
If you have a didgital Odometer look there for codes (example P 0123). There may be several so wait until it reads "donE". Record these Codes.
If you do not have anything reading in the Odometer window: Look immediately at the Check Engine Light and count the number of times the Check Engine Light blinks (on and off). There are two (2) digit blinks, then a pause followed by pause followed by more blinks. Record the number of blinks. The last set should be five (5) blinks followed by five (5) blinks.
Get back with me on what the blink counts were. (example 18, 23, 55).
Let me know if this helped, and provide me with additional information I requested. Contact me at FixYa.com using the comment section of tyour original Posted Question.

Feb 16, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How do I see/get error codes for my 1988 4Runner? (idling prob.)


The check connector is located near the No. 2 relay box. Short terminals T and E1 of the check connector. (jump together)
2. Turn the ignition ON. do not start engine.
3. Read codes by the number of flashes of the "CHECK ENGINE" WARNING LIGHT.
4. System normal: blink every 0.25 seconds.
5. Malfuction Code: light will blink a number of times equal to the malfuction code.Between first digit and second digit, 1.5 sec
Between code and code 2.5 sec, between all malfuction codes 4.5 sec
6. The diagnostics code series will be repeated as long as the connector terminals T and E1 are jumped.
7. Codes are 2 digit numbers

Feb 11, 2010 | 1988 Toyota 4Runner

1 Answer

O/d light and check engine light blinking


You can reset these codes by disconnecting the negative side of your battery, has to be the negative side, for 5 minutes and then try it. If the light comes back then you may have a problem.

Feb 06, 2010 | 2000 Mazda 626

1 Answer

I have a 2002 Maxima 6 Speed Manual Trans. Under Heavy Acceleration the check engine light blinks several times and then goes off and stays off during normal driving. The light seems to come on as I hit...


U have an ignition related problem, have the system tested for the trouble code that is stored in memory any time the check engine light comes on to determine what is causing this issue. check engine lights have nothing to do with oil level or pressure, they indicate electronic control problems with the engine, trans or emission system.

Jul 07, 2009 | 2002 Nissan Maxima

1 Answer

Check engine light blinks


i believe there is a guide in a haynes manual for your truck maybe you can try and get one and see.

May 20, 2009 | 1986 Toyota Pickup 4WD

Not finding what you are looking for?
1993 Honda Accord Logo

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...