Question about Chevrolet 1500

2 Answers

How do i get the axle shaft clip apart from the diff. on a 2004 chevy 1500

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,620 Answers

Pull rearend cover off look for a 5/16 bolt going thru center of pin if you don't see it just spend differenial until you see it take it out then push the 3/4 inch pin out with pin out push one of the axles in then take pair of needle nose pliers and pull C clip out then pull axle,do the same for the other side.

Posted on May 17, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 878 Answers

With a needle nose vice grips

Posted on May 17, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take apart the front differentral of a 2005 dodge ram 4x4


remove the axles --- remove the drive shaft . If it is a Salisbury style diff remove the plate on the front and prise out the diff carrier (Crown wheel assembly ) Undo the pinion nut --remove the pinion and pull the pinion out the front. If it is a centre that is bolted in from the back then undo all the bolts around the cast housing and pull of that way.

Feb 17, 2014 | 2004 Dodge Ram 1500

1 Answer

2001 chevy camaro 5.7, how do i remove the rear driver axle which connects in the diff. in order to change the bearings and seal?


you need to open the dif and remove the locking nut and pinion shaft. Then push the axle in towards the center to remove the C clip thats on the axle.

Jul 24, 2010 | 2001 Chevrolet Camaro

3 Answers

How to replace rear Axle seal on 4x4 chevy


this is very hard if you do not know what you are doing. Ill try to step you through this
  • pull wheels
  • drain pun-kin case
  • pull rear cover
  • in between the spider and axle sets pull C ring with needle nose pliers
  • pull hub and axle out CAREFULLY as there are roller bearings on the end of the axle housing
  • pull seal out at the end of axle housing
  • tap in new seal CAREFULLY and straight DO NOT BEND IT or it will be junk
  • replace axle carefully as the roller bearings are still there
  • replace C clip to original position
  • replace axle diff cover and replace the gasket with a new one
  • refill diff case
  • install tire
  • your good to go

May 03, 2010 | 2002 Chevrolet Silverado

1 Answer

Rear axle bearings


when u say axles are u referring to the shafts,if so remove the diff plate and therte are two c-clips holding them in

Mar 08, 2010 | 2003 Chevrolet Silverado 2500HD

1 Answer

How do i change the spider gears in a 2004 chevy silverado 1500


Take off pumkin cover, on center pin in the diff there is a bolt on the botton of the bigger opening that holds pin in place, take the bolt out of the pin and tap the pin out. You have to tap out one side to get out one gear, then tap the pin back through and do the same thing for the other gear. Once you get the upper and lower gears out there are C clips that you have to take out so you can slide the axles out at the two middle gears will pop out.

Oct 30, 2009 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Rear axle shaft removal on 2002 chevy s-10not sure how to get to c lock on end of shaft this is a locking diff.


It is more than likely limited slip... It should be same as others pull the spider pin out by removing retainer rotate diff. and slide pin down but do not completely remove. Push axle in and remove C clip.

Sep 22, 2009 | 2002 Chevrolet S-10

1 Answer

2003 chevy suburban front axle noise


Worn side bearings is where the noise is coming from and might as well do both sides, I used replace them in about 2-4 hours, depending on where Murphy happened to be. Disconnect both side inner CV joint, front prop shaft and the 4X4 actuator line. If you want to drop the front pumpken. Not sure if you have enough room if you want to change the bearing without removing the pumpken from the frame. You should see when you disconnect the CV shaft.

The front diffs are toys compared to the rear, if you use auto4wd too much there are bearings in your tranfer case that are similar to the side bearings in the front diff. In both appearance and durability and soon you'll replace those too.

Good luck and keep me posted.

May 26, 2009 | 2003 Chevrolet Suburban 1500

2 Answers

Rear end


Did you pull the pin at differential just to be sure? If it's non-"C" clips, you'll need a slidehammer attached to hub, over studs & use wheel nuts to hold it on there. Get er done !

Apr 24, 2009 | Chevrolet Monte Carlo Cars & Trucks

2 Answers

Can not remove rear axle on chevy avalanche 4x4 1500.


you will need to take off the differential cover (drain and change diff oil at this time)

rotate the axle so that you can get at the cross pin and remove it by undoing a small bolt that holds it in place. it should slide out with ease, but i have had them stick, take care not to let the cross pin get lodged where it is difficult to extract

a single C-clip is holding each axle inside the differential housing

you will need to push in from the outer end of the axle, while simultaneously manipulating the C-clip off of the inner axle, repeat this same process on the other side

i will put some of pics up in a minute

Feb 08, 2009 | 2002 Chevrolet Avalanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...