Question about 1994 Ford Ranger Supercab

2 Answers

Can't find wiper relay on 94 ranger

Posted by on

  • rayspfx May 17, 2011

    thank you I will try that

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

Wipers do not require a relay. If your wipers are not functioning and a fuse is blown, the washer will not work either. If the washer works, check the wiper switch or the wiper motor, but wiper motors are normally very reliable.

Posted on May 17, 2011

  • rayspfx May 17, 2011

    the wipers work on high only not on low or intermitant washer works fine I changed the wiper motor still only working on high

  • Hans Pearson
    Hans Pearson May 17, 2011

    The wiper switch is faulty. The low and intermittent contacts are not working. You will need to replace the wiper switch. It may be possible to open it and try a repair but with all the little contacts and springs inside, it is hardly worth the effort.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The '92 Ranger has a intermittent relay.
It is under the dash, in the middle.
Pull the steering column trim and brace plate.
The brace bar will have to be moved out of the way to pull the bracket all the way out.

Posted on Oct 07, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the relay location in the relay box


The problem would be in the stalk controller. The wiper Relay is what provides power to the motor for all settings, the delayed wipers, low speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working.

Jul 27, 2014 | 1998 Ford Ranger

2 Answers

Need to know location of wiper fuse 2001 ford ranger extended cab 4x4 have no funds to pay for answer. Am disabled and am trying to survive on ssd


In the Passenger compartment fuse panel, located on the left-hand side of the instrument panel facing the driver's side door, check position 16, 30AMP for Windshield Wiper Motor, Wiper Hi-Lo Relay, Wiper Run/Park Relay

Pull the panel cover outward to access the fuses.

zjlimited_982.jpg

Additional details could find in this link to download the Ford Owners Manual

Hope this helps (remember to rate this answer).

Apr 13, 2011 | 2001 Ford Ranger Regular Cab

1 Answer

Windshield wipers only work on high on 98 ford ranger


Try replacing relay for wiper with another same relay from fuse block from another working accessory.Had same issue on friends Ford Ranger. Moved relays and cleaned harness connection at fuse block. Works fine.

Mar 14, 2010 | 1998 Ford Ranger SuperCab

1 Answer

2002 ford ranger wiper problem replaced wiper motor switch and relays still want work


Check for blown fuses or go outside and turn the wiper on and see if you can hear the wipers trying to move.  The bushings under the wiper arm might be stripped or not properly aligned.  You might have a short somewhere also.  Electrical problems can get expensive.

Oct 30, 2009 | 2002 Ford Ranger Regular Cab

2 Answers

Wipers do not work in intermittent position. They do work in low and high speeds but do not automatically return to the park position. They stop wherever you turn the switch off.


i belive that your wiper switch has gone out on the intermittent side. this is a very common problem.
I hope this helps you
Thanks
Please leave rating

Apr 21, 2009 | 2000 Isuzu Amigo

2 Answers

Winshield Wipers don't work


It is probably the relay. They are not very expensive. I would not try to rig this if you can avoid it. It leads to a risk of fire when people try to wire around the existing system.

Call your parts store and get a price quote on the relay. You will need to tell them if you have delay wipers or not.

Apr 15, 2009 | 1994 Ford Ranger Supercab

1 Answer

94 raNGER 2.3


if our alternator regulator is good it doesnt manner just check for corosion let me know

Jul 29, 2008 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

Related Topics:

1,387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...