Question about 1988 Mazda B2600 Cab Plus

Open Question

I am looking for an airflow sensor for a 1986 Mazda Proceed Marvie (B2600) petrol -Automatic Transmission. I am in Harare, Zimbabwe

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: the car is a 92

I don't know if this will help those b2600 owners, mine was a 92 automatic, it use to have all sorts of problems similar to like rough idling, stalling after it ran for a couple of minutes. Changed fuel pump and filter but did not help.Running out of idea so I removed the ECM (computer) and noticed a blown capacitor (ECM at passenger side kick panel). Goggled the ECM number and found out it is a common issue to that ECM built by Mitsubishi, common to Mazda and Mitsubishi cars and trucks on certain model years. Working fine now for almost a year after I sent it out for repair.

Posted on Dec 30, 2008

Ad
greg_margo
  • 1959 Answers

SOURCE: need a diagram for replacing fan belts on a mazda

Below is a link for all of the belts on your 323. Best of luck.
Greg

1991 Mazda 323 Belts

Posted on Jul 25, 2009

  • 365 Answers

SOURCE: i need to set up the camshaft timing marks on a 1994 mazda b2600

its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Posted on Jun 11, 2010

  • 14036 Answers

SOURCE: I ran my 1992 mazda

SOUND LIKE FUEL PUMP DAMAGED BECAUSE LACK OF FUEL. FUEL IN TANK.FUEL KEEP FUEL PUMP COOL AND LUBRICATED IF FUEL TANK GET TOO LOW OR EMPTY CAUSE FUEL PUMP OVER HEAT DAMAGE.

Posted on Nov 06, 2010

  • 677 Answers

SOURCE: 1998 mazda bravo ute b2600 petrol- Cannot locate

No!!!! The motor has oil filter.Look from the top of the motor.It is right there.Under the manifold.Hope this helps

Posted on May 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Mazda Bravo b2600 petrol lag in acceleration, new plugs extractors,flow through cat, new air filter,air flow meter, could it be ecu, or throttle control unit , revs hard goes like a slug.


I would check into your transmission at this point and eliminate that before moving on. To have a shop look at it and diagnose is only 80 bucks or so.

Nov 21, 2016 | Mazda Cars & Trucks

1 Answer

Ford Couirier/Mazda Bravo 1994 2.6 petrol 4x4 B2600 I need to buy new/used ECU (G618) replacement or upgrade for my 4x4 ute I want to know the compatible units i can use and best place to get one.


the ecu has to come out of the
same year and number as the engine and drive line
Ford Courier/Mazda Bravo 1994 2.6 petrol 4x4 B2600
source from
ebay
a 4x4 wrecker
an good auto electrican can referb your original
this is usa but might be a seller some where in australia

edit I added image of a G695
http://www.ebay.com/itm/OEM-91-92-93-MAZDA-B2600i-TRUCK-ENGINE-COMPUTER-CONTROL-MODULE-ECU-G618-18-881A-/1916530508691a07fc2d-2613-4d2f-a996-9a4d38ad626f.jpgford-couirier-mazda-bravo-1994-2-6#sln-36462275-ynwsor2g41t5qaon3uf1gyaf-5-2_2.jpgford-couirier-mazda-bravo-1994-2-6-ynwsor2g41t5qaon3uf1gyaf-5-3.jpg

Sep 11, 2016 | Ford Cars & Trucks

1 Answer

Mazda proceed marvie


sounds like the valve lash needs to be set. You should have heard ticking coming from the engine. This can be adjusted by removing the valve pan covers and adjusting the tappets. If you over tighten it will burn a valve, if under adjustment a loss of power. Better to have a bit too much clearance than too little. Best to check when engine is warm. The lobes of the cam could be worn but I have my doubts.

Apr 21, 2014 | 1988 Mazda B2600 Cab Plus

1 Answer

B2600 engine


Throttle position sensor. Start there.

Jan 16, 2014 | 2003 Mazda B-Series

1 Answer

Engine compression low on three cylinders, what should the compression psi or bar be please? It has a slight miss but leads and plugs seem to be sparking fine, any ideas. This vehicle is actually a 93...


yes a head gasket failure cancause this. spary oil, wd-40 into those 3 cyc;lindersand see if cmpression increases. if it does you need rings. if it does not you need a head gasket.

Jan 02, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

1999 Volvo S80 T6 Engine Misfiring


some weeks ago i had similar problems with my 2001 s60,i cleaned the etm and fitted a front o2 sensor ,its now idling at around 800 and driving fine.You could try changing the o2 sensor-but remember the earlier etms are troublesome and it may be a big part of your problem,the cleaning can work in only some cases

May 04, 2009 | 1999 Volvo S80

1 Answer

The car is a 92 marvie proceed it can run for approx 15mins then starts running rough no power wont rev up sounds like sumthing with the timing we have change petrol filter tried a different coil and a...


I don't know if this will help those b2600 owners, mine was a 92 automatic, it use to have all sorts of problems similar to like rough idling, stalling after it ran for a couple of minutes. Changed fuel pump and filter but did not help.Running out of idea so I removed the ECM (computer) and noticed a blown capacitor (ECM at passenger side kick panel). Goggled the ECM number and found out it is a common issue to that ECM built by Mitsubishi, common to Mazda and Mitsubishi cars and trucks on certain model years. Working fine now for almost a year after I sent it out for repair.

Jul 31, 2008 | 1988 Mazda B2600 Cab Plus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...