Question about 1984 Chevrolet Celebrity

1 Answer

Replacing motor mounts

How to replace motor mounts on an 1984 chevy celebrity?

Posted by on

  • Anonymous Mar 29, 2014

    Front motor mount

  • Anonymous Mar 29, 2014

    Motor mount broke

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

It's not as easy as it sounds. Basically you will need to lift the engine off the frame and unbolt the old ones off. I highly doubt that you can do this without disconnecting the transmission. Definitely something that you want an experienced mechanic to help with. It may just not be worth it. If you can lift the engine with the transmission attached (if there is enough room to tilt it up), that would be the best bet but you will need an engine hoist or cherry picker to do this. (THIS IS NOT FOR AN AMATEUR)

Let me know if you have any further questions, this will require a lot of work

Posted on Aug 14, 2008

  • joseph
    joseph Mar 27, 2014

    thank you so much it looked really difficult as is everything on this little truck but I love her....any idea what it would run to have this done professionally?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove starter on 1984 chevy celebrity


According to manuals starter removal is dependent upon the engine type used however I looked at a 1984 Celebrity with 2.8 L X version enigne and both mog my repair manauals which toild me nothnig aobut the fiornt frame of htis vehicle being in the way of the starter mounting bolt nearest the engine hence it appered to me one woulde need to raise the engine if it could be raised enough or remoive the negine., If nyone have remoived thios startewr pelase let me know hw, okay/

Jun 13, 2012 | Cars & Trucks

1 Answer

Hard start


You seldom feel a misfire at cruise. You have a misfiring cylinder(s)

Mar 16, 2012 | 1984 Chevrolet Celebrity

2 Answers

Where is the tun signal flasher/relay located on a 1984 chevy celebrity?


under the dash on the driver side u should see the fuse block were all the fuses are there will be a round silver looking thing ,it will be about as big as a quarter this will be your flasher relay

Apr 09, 2011 | Chevrolet Celebrity Cars & Trucks

2 Answers

I have a 84 Chevy Celebrity stationwagon and the turn signal quit flashing but still comes on, Is there more than one relay under the dash for this. I already replaced the one I found and no change.


it could be the flashing signal switch, the electrical wires in the stearing colum sometime brake, try that. hope it helps you. in order to remove it you need to take cover of stearing colum and usually one plug and two bolts hold it in place. good luck

Mar 18, 2010 | 1984 Chevrolet Celebrity

2 Answers

I need to replace the fuel pump on a 1984 chevy celebrity 2.8/V6 but I do not know where it is located. Also does this car have a fuel filter? I have searched and cannot find one.


84 celibrity has a carborater and the filter is in the carb. where the fuel line connects to it. Follow this metal line down past the timing cover and the other end screws into the fuel pump thats connected to the side of the engine block near the oil pann gasket on the belt drive end of the engine it has some brackets surounding it for the power steering pump and it's hard to get to and lots of other stuff needs to be removed to get to it. When their bad they leak oil too and sometimes they leak gas into the oil.195379185.jpg

Nov 28, 2009 | 1984 Chevrolet Celebrity

1 Answer

Change tps on 88 chevy celebrity


JUST UNSCREW IT AND REPLACE IT WERE IT WAS POSITIONED

Aug 31, 2009 | 1988 Chevrolet Celebrity

1 Answer

Need to replace oil pump on 86 Chevy S-10 V6


No. Just remove the oil pan and the oil pump mounting bolt and the oil pickup tube nut and there is no need to lift the engine. Hope this helped and best wishes.

Aug 13, 2009 | 1984 Chevrolet S-10

1 Answer

1984 Chev. Celebrity power steering pump adjustmen bolts


The mounting bolts on the pump must be loosened as well as the ajustment bolt. Tighten the ajusting bolt back up first after tightening. 

Dec 25, 2008 | 1988 Chevrolet Celebrity

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...