Question about 1997 Chevrolet S-10 Pickup

2 Answers

I have 97 4.3 s-10 and I have no turn signals but I have emg. flashers

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

I did that and i relpaced the flasher and it still wont work i dont know what to do

Posted on Nov 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had the same problem. there are a set of relays under the dash, right around where the cigerett lighter is. one is for your flashers and one for you signals. I think the one toward the passanger side is for your turn signals. easy fix...

Posted on Aug 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix the turn signals on my ford exposition


exposition ? Do you mean expedition ? What year ? The turn signal switch could be bad , bad fuse , turn signal flasher would be a likely culprit . hazard light flasher is different from turn signal flasher .

Mar 16, 2016 | Ford Cars & Trucks

1 Answer

Why are my blinkers working i changed the flasher and the switch on steering column i have a1987 nissan v-6 se 4x4 trvuck?


See troubleshooting basic turn signal and flasher problems

www.procarcare.com/includes/content/.../ch14/14TSTurnSignals.html
Most problems in the turn signal or flasher systems can be reduced to ... Occasionally, problems in the turn signals are traced to the switch in the steering column, which ... One turn signal light on one side doesn't work Check and/or replace bulb. ... Often the filaments have been reversed In systems combining stoplights with ...

where is the flasher(turn signal relay)located ... - CarGurus

www.cargurus.com > Questions > Chevrolet > Cavalier

CarGurusApr 17, 2007 - Emg. flashers work but L/h and R/h signals dont. ... How do I get that cover. off my steering wheel? ... How to change Flasher Fuse 4 answers.

Turn Signal Switch Replacement - YourMechanic


Dec 15, 2015 | Nissan Cars & Trucks

1 Answer

Turn lights blink with hazards but not with turn signal..flasher replaced. is It the multifunction lever then??


There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not the turn signal flasher than I would start by replacing the turn signal flasher.

One thing you can do once you find the turn signal flasher is to unplug it and use a jumper wire between the two pins of the connector then turn the key to the run position and place the turn signal lever in the left or right position. If the turn signal lights know light up than the turn signal flasher is the problem

Sep 09, 2014 | 1997 Oldsmobile Cutlass Supreme

1 Answer

Turn signals were working...but blinking fast. now they don't work at all...replaced fuse in side panel near door and still nothing. Everything else works..headlights, wipers, hazards..what gives?


you have a separate flasher for the turn signals.this is what your problem sounds like.if all your lights are working including the signal indicator on the dash then it will be the signal flasher.if you turn on the hazard flashers and locate it under the dash, this will show you what the turn signal flasher will look like.then you will have to look for the flasher unit on the fuse panel that looks like the hazard flasher.replace the turn signal flasher and you will have your signal flashers again

Mar 08, 2011 | 1996 Dodge Ram 1500 Club Cab

1 Answer

92 ply acclaim turn signals do not flash all lights work and emg.signals work


Hello...
You might want to check or replace the flasher relay. On most cars this also controls the blinkers.

Good Luck.....

Jul 21, 2010 | 1992 Plymouth Acclaim

1 Answer

1997 Chevy Tahoe both turn signals stopped working


Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Jul 21, 2009 | 2001 Chevrolet Tahoe

2 Answers

96 ford tarus turn signal


The turn signals and the emergency flasher are controled by a single electronic flasher unit. It looks like an electronic relay and is located on the far left underside of the dash. It is on a mounting bracket and has a three wire connector. If you do not hear this clicking when you use the turn signals or the emergency flasher it may be bad. Just remove the connector and remove the one screw holding the flasher to the bracket. Be sure the replacement is identical to the old one and compare them before installing the new one.

You may want to also check the turn signal bulbs also. Other causes would be bad signal and flasher switches, bad bulb connectors, and opens or shorts in the wiring.

Nov 19, 2008 | 1996 Ford Taurus

1 Answer

1987 toyota camry s/w back left (driver's side) turn signal does not work, bulb and ground are good, front left signal works but flashes fast, rt side signal both working ok. when emg flasher is turned...


Problem solved, Since 3 of the 4 turn signals worked I did not fuse was a problem
but after checking the turn swithch, I pulleded out the fuse which looked ok, but when
I put it back in all the turn signal lights woked! Apparently just one part of the surface
of the fuse was corroded.

Aug 01, 2008 | Toyota Camry Cars & Trucks

Not finding what you are looking for?
1997 Chevrolet S-10 Pickup Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...