Question about 1992 Honda Accord

1 Answer

Brake always on 1998 honda accord - 1992 Honda Accord

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Honda Master
  • 1,779 Answers

Which brake is on? Emergency brake (it could be over adjusted, or the brake cable at the rear drums is corroding and the cable is not releasing.. Pull the rear wheels off, soak the cable w/ some type of penetrating oil, wd-40, etc--DON'T get any on the drum or brake pads.
If it's a front brake, it could be a bad caliper, or even the brake pad wear indicator( the wear indicator touches the rotor when the brake pads wear down to a certain point. This is a warning to replace the brake pads soon. Even though the brakes aren't on, the wear indicators sound like the brakes are dragging.
Hope I didn't overload you w/ this explanation, just trying to cover all possibilities. Let me know if you have any questions, and what you find out is wrong. Good luck! countrycurt0

Posted on Aug 15, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to fix honda accord lx v6 1998 stuck in park?

If the brake lights are not working during this problem try the brake/stoplight switch.

Aug 07, 2014 | 1998 Honda Accord

1 Answer

How do I change a faulty brake light switch in a 1998 Honda Accord

look where brake pedal is located and youll see where the pedal makes contact with the switch i believe its bolted 10mm bolts remove then electric connector and install reverse what u just did

Jun 24, 2014 | 1998 Honda Accord

1 Answer

How do I properly bleed the abs brakes on my honda accord 1998. The bleed nipples are on top of the brake calipers.

Bleeding ABS active brake systems requires a special tool to hold the pressure valves op3en in the ABS hydraulic control module.

Feb 02, 2012 | 1998 Honda Accord

2 Answers

1993 Honda Accord Brake Fluid Type. What type of brake fluid is good for my 1993 Honda Accord - DOT 3 Synthetic or Mineral.

Just use a normal DOT-3 brake fluid! Just always check the color and level of the fluid!
If it is dirty( black ) u need to drain the whole system and put in a new DOT-3 brake fluid!

Jun 14, 2011 | 1993 Honda Accord

1 Answer

Which oil and other fluids do i put in my 1998 honda accord

use 5-w30 oil make sure to use honda atf z-1 trans fluid or the dw1 honda fluid it will save you alot of problems. Use regular dot3 brake fluid and I recommend using honda power steering fluid.

May 09, 2011 | 1998 Honda Accord

1 Answer

1998 Accord: 1998 honda accord sedan break lights stay on...

In all probability, the brake switch got stuck in the closed position. One way to test it is by trying to move the shift lever from Park to Neutral without depressing the brake. If you can do this, then the switch is damaged. It is very simple and inexpensive to replace.It is located a few inches above the brake pedal rubber pad.

May 17, 2010 | 1998 Honda Accord

1 Answer


check the wires dude, always there`s left one that touch the metal of the stereo. it always happens!

Cheers i hope it help

Jun 18, 2009 | 1998 Honda Accord

2 Answers

Brakes light

You have a faulty or mis adjusted brake light switch

Jun 17, 2009 | 1998 Honda Accord

1 Answer

1998 Honda Accord EX

  1. check if the turn signels work. check the brake petal switch underneath the brake petal-also check the operation of the emergency flashers for operation. all of these items are related.

Aug 31, 2008 | 1998 Honda Accord

1 Answer

1998 Honda Accord 4 cylinder

sounds like your neutral safety switch on your brake pedal is wearing can be adjusted to engage the brake pedal sooner.thanks for using fixya!

Jul 30, 2008 | 1998 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides