My car stopped working for no apparent reason. While I was driving, the engine made a clanking noise and died. Now it won't start and when I tried to push the car and pop the clutch, as soon as I pushed the clutch pedal the car jerked and wouldn't move. Gas, oil, and coolant are all fine.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Has anyone checked the timing belt ? sounds to me like it might have striped or broke a timing belt. need to ckeck it for fire/fuel , there should be a cover you can remove to see if the belt has any damage.
Well, to begin with, the LAST thing I would replace if a vehicle died going down the highway is the starter. What caused the engine to die? It certainly was not the starter! If the starter will not crank the engine over, you probably have a dead battery. If your battery went dead while driving the vehicle down the road, you most likely have a bad alternator. However, it is really hard to say without actually being able to see the car.
My 2004 Kia Rio just started losing compression and died on me. I tried starting it and it only clicks. I checked the battery cables and they are not corroded and very tight. Could it be the battery or the alternator not charging the battery? there is no water in the oil and it's not the water pump.
My rio kia bought on from uyi technical dealer in benin city, edo state of nigeria only 4 months ago is vibrating with noise while driving. The noise is noticed by other road users even in motion, making a very loud noise or sound that is highly embarrassing. The dealer mechanics have checked more than twice yet no result, instead the hub bearing is observed; tyres are turn over yet the noise persists.
What do think is resolution to the problem? pls help me. Vinson- firstname.lastname@example.org