Question about 1997 Buick LeSabre

1 Answer

Blinkers I have replaced the light bulbs and can not find my manual need to figure out what to do next to get them to work. Buford is getting old but he runs great!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

Check fuse, wiring, and brake switch.

Posted on Aug 27, 2008


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The driver side running lights don't work on my 2007 hyundai elantra. brake light, blinkers and headlights all work and the bulbs are good because they flash when i lock car with the fab. but they don't...


brake lights and blinkers use the sale filament in the bulb
the running light is the other (in a dual filament bulb)
you may have a poor connection or a break inside the bulb base.
test with a known good bulb.
the next place to look is the connector on the light switch and the joint where the running lights split off.

Sep 12, 2013 | Hyundai Motor 2003 Elantra

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

1 Answer

My brake lights and rear blinkers are not working, I checked light bulbs (tail lights work) and fuses. what next


typically with gm the brake light and turn signals work on the same filament, so just because the tail lights come on does not mean that the bulb is not burned out. try simply replacing the bulbs.

Feb 21, 2011 | 2001 Chevrolet Cavalier

3 Answers

Have a Chevy Corsica 1996. Blinkers not working right. When I step on brake the arrow on instrument panel for the right blinker lights up. When use left blinker, both flash like the flashers are on. ...


It sounds like a bad light socket. The brake light and the parking/running/regular part of the socket are shorting out. When you press on the brake petal it's shorting out on the turn signal and sending current to the indicator (arrow) on the dash.. When you use the blinker, it's shorting with the brake light and causing them both to flash...

Check the socket and get back to me with the result.

Mar 14, 2010 | Chevrolet Corsica Cars & Trucks

1 Answer

Ford Focus 2006 ZX3 How do I replace the rear blinkers bulb


I know this might be a dumb question but, do you have the manual? The Focus owner's manual contains information on how to replace various secondary outside and interior lights.
When you open the hatchback look behind where the light is and you will see a small hole. Unscrew the screw that it is there. You also need to unscrew another screw that is beside the light on the outside (top right). Then you just pull the whole light assembly off the car. Next disconnect the wire from the back of the light bulb assembly. Next, twist the light bulb assemble and pull it out. You now have access to the bulb. Hope that helps.

Oct 20, 2009 | 2006 Ford Focus

4 Answers

Left brake light does not work signal light left rear does not work. when left signal is turned on it blinks very fast


means you have a blown bulb or you need to replace the.... oh i cant remember the exact name right now but go to autozone or whereever and tell them you need the fuse like thing that makes your blinkers work its only a few dollars

Oct 16, 2009 | 1998 Chevrolet K1500

1 Answer

I want to replace flasher on 89 olds 88 where is it


If you mean the blinker bulb, they are either set in behind the front bumper, where you see the orange/white colored glass (directly beneath the headlights)....OR the side blinkers, which are accessed by opening the hood and reaching in from the inside.

The rear blinkers are able to be accessed by opening the hood, and removing a small (phillips head) screw on the top of the vertical tail light housing. These lights serve as blinkers and brake lights, and there are two in each housing. Hope that helps! :)

Jun 16, 2009 | 1989 Oldsmobile Delta 88

2 Answers

My 1985 Mercury marquis blinkers are not working


my need to replace turn signal switch on the steering coloum. Dont know if it will help or not.

Mar 28, 2009 | 1985 Mercury Marquis

1 Answer

My 94 grad am blinkers stoped working but the hazard light are ok


A burned out bulb is the most likely cause for your blinkers to not work and your hazards to continue to work normally. You can also check your public library for a Chilton or Haynes Manual (or auto parts store) for your specific make, model, and year range to see if there may be a second flasher relay (blinker). Another easy way to find it is if you have any blinkers at all, turn them on and follow the sound of the "tick tick" to it's source. Most cars have them under the steering wheel, behind the dash, or right next to your left foot as you are sitting in the driver's seat. I hope I could help you find what you're looking for. Good luck and don't forget to rate! Thank you!

Feb 26, 2009 | 1994 Pontiac Grand Am

2 Answers

2001 chevolet cavilier brake lights & blinkers burning up


sounds like you put a 21 watt bulb in place of a 6 watt bulb ,or you have put single pole bulb in place of a double filament,double pole bulb

Feb 02, 2009 | 2001 Chevrolet Cavalier

Not finding what you are looking for?
1997 Buick LeSabre Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...