Question about 1991 Nissan Maxima

1 Answer

Only thing that works is brake lights, radio, and headlights

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Look under the hood where the battery is . theres a fuse box there.there should be a red 45 amp clear fuse. look and see if that is burnt out.

Posted on Sep 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights not working


All of the marker and tail lights are powered from a 15amp fuse going thru the headlight switch on a brown wire. Do you have power from that circuit coming out of the headlight switch ?

Jan 25, 2014 | Mercury Cars & Trucks

1 Answer

Brakes short lights


You need to get you alternator tested, it sounds like the current output is too low.

Mar 11, 2012 | 2005 GMC Safari

1 Answer

I have a 99 Jeep Grand Cherokee Limited i have brake lights that work when i apply brakes, but as as soon as i turn my headlights on the fuse blows and i have no working tailights with the headlights on. ...


There is definitely a short in the park lights system. Did you just have a radio installed....since the illumination wire sometimes gets grounded and will cause that fuse to blow until you fix that wire.

Aug 17, 2011 | 1999 Jeep Grand Cherokee

2 Answers

When headlight are on and hit the beake pedal only the 3rd brake light comes on the rest are stuck . When i release brake pedal it seems like i am driving with my brake light on . but my headlight off...


It may sound silly, but check your brake light bulbs to see if they have been installed incorrectly. Brake light bulbs have two filaments, one for tail light, and a brighter one for brake lights. On some cars if the bulb is installed wrong, the brighter filament will stay on for tail lights. The only other thing I can think of is the wrong bulbs have been installed.

Dec 25, 2010 | Toyota Camry Cars & Trucks

1 Answer

I have a 2001 Chrysler Sebring LXi Coupe. It started an odd problem today. When I apply the brakes, as I get the pedal pushed almost as far as it will go the display on the radio (including the little...


i guess u have standard radio that came with the car? i don't know how it calls this thing, but when u turn on ur headlight, on the same stick there is another regulator that regulates light in the cabin and dash light, so turn it off, turn clockwise! or leave a little light in ur dashboard!

Apr 02, 2010 | 2001 Chrysler Sebring

1 Answer

The problem is that every time I start my car and begin to accelerate, reverse, brake or whatever, generally about 3 seconds after I do this the car makes a sound and slightly jolts. When it does this, my...


sounds like you are having a short circuit, my guess is something in your ABS unit has failed, if it were me and ANYTHING AT ALL was happening that should not especially with something as important as the brakes on your car, i would get it serviced immediately, you probably shouldnt even drive it to your mechanic but get it towed there instead. any trouble that is brake related is a serious issue.

Feb 25, 2010 | 1997 Chevrolet Lumina

1 Answer

Hooked up subs in my 07 tahoe radio plays but truck wont start


when you turn off the radio and subs does the car start?

do other things work in the car like headlights indicators brake lights

i sugest you turn off the radio and start car or unplug the subs from the battery and try


Dec 31, 2009 | 2007 Chevrolet Tahoe

1 Answer

When pressing brake pedal headlights dash radio lights flicker


have the output of the alternator check... and perhaps the battery posts may need cleaning as well.

Robert

Feb 05, 2009 | 1998 Saturn SC

1 Answer

Geo tracker lights and radio not working


power loss.
any good car elect. tech find this pronto.
just takes a volt meter to find the voltage drop point.

top fails:
1: corroded fuse box on right front finder (under fuse box)
2: did you say it kills motor too. cant figure above.

what about heater fan, it uses tons of current.
as does HL followed by tails.

20amps, 15amps and 5amps respectively

you have resistance some where.
and load , kills the voltage .

for me.
i'd:
check battery voltage , when it dims out.
then of ok 12.5v is ok key on,not started.
then check voltages at a right fender , fuse panel
all points there, 12.5vdc , same as battery v.
if OK
then
check voltage at the fuse above right knee
with load full, hl, fan, brakes, just key on.

now you know what circuit is fail ing by now.

report back with this facts.

Oct 16, 2008 | 1991 Geo Tracker

Not finding what you are looking for?
1991 Nissan Maxima Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...