Question about 1991 Chevrolet K1500

1 Answer

Only turn over sometimes

Sometimes my 91 siverado will fire right up and sometimes i get a metal grinding sound. doesn't sound like its coming from the starter which is only a year old. Can i get a diagram of the flywheel assembly as well?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 91 Answers

I will have to find the flywheel diagram for you but its still prob the starter usually when it does it sometimes its not the starter going bad its not in properly its either not in flush or needs shimmed they sell shim kits at auto zone or advanced auto for a few bucks just call down to one of those places and just ask them if they make a shim kit and if they do, do they sell alot of them if they tell you yes they sell alot then that will give you the lot easier start and cheap.. IF you have any questions at all let me knopw and if you could please rate me if you get a chance i would appreciate it.

Thanks,
Steve

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could cause metal on metal grinding at 40 mph and above on '96 Pathfinder?


First thing is to check the brakes, especially the condition of the pads, and if you have worn right through them, the condition of the calipers, and finally the rotors. Sounds like one of these old the key.
In any case can you get back to us with the solution so that others can be helped in the future, thanks.

Jul 10, 2014 | 1996 Nissan Pathfinder

1 Answer

2005 Ford Explorer is making a grinding noise


I had some issues with my 2005 explorer left rear. It was making a creepy old door sound at low speeds and then a high pitched whisel at high speeds. That turned out to be a broken wheel bearing and had it replaced. Note each wheel has two wheel bearings. After that a new noise developed that sounded like metal scraping/ grinding metal. It end up being the brake dust cover got bent when they replaced the bearing and it was rubbing something, the fix for that was bending it so it didn't rub. I hope this helps.

Sep 03, 2012 | 2005 Ford Explorer

1 Answer

Metal grinding noise when Turning Left only


Check the brake system of front right wheel. I am sure, the problem is there only.



Car Accessories

Aug 01, 2012 | Cars & Trucks

1 Answer

91 chevy Siverado 2500 AC Blower problems


My guess would be the same as yours. Good job.

Jun 23, 2010 | 1991 Chevrolet Silverado 2500

2 Answers

Grinding sound when turning and braking at slow speeds


check your CV joints on your front drive axles. they will sometimes grind or click when braking or turning.

Feb 09, 2010 | 2002 Subaru Outback

1 Answer

Squealing or clicking sound and then next day grinding sound louder when you take foot off accelerator clicking sounds from right side grinding underneath 2002 grand cherokee


Squealing usually indicates that the brakes are in need of replacement. There is a small piece of metal that as the brake pads wear comes in contact with the metal rotor. When the pads get close to being worn away the tab touches the rotor and it squeals. The tab can also click.
When the pads are worn away completely the metal backing comes in contact with the rotor and it grinds. Grinding is bad. It means the car's brakes are metal to metal. This will cause damage to the rotors resulting in an even more costly brake job.
You should have it taken care of ASAP.
I hope this helps.

Oct 16, 2009 | 2002 Jeep Grand Cherokee

1 Answer

91 Explorer starter problem after replacing.


It May Be A Bad Starter I Have Replaced 3 In A Row Before I Got A Good One.

Jan 18, 2009 | 1991 Ford Explorer

2 Answers

Thumping sound


does it sound like a metallic sound or somthing different

Aug 20, 2008 | 1991 Chevrolet S-10 Blazer

Not finding what you are looking for?
1991 Chevrolet K1500 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...